Select a Category
Build Author MTO Views 605
DIN 35mm -like quick clip for 20mm extrusion
A half baked idea for mounting electrics and electronics using a 35mm-DIN-rail-like mounting.
Build Author Glenn Weston Views 3094
"AcroCadabra" My Acro Laser built with my C-Beam XL
Well I built a C-Beam XL around a year ago, I am still learning things as I make stuff with it, it has been quite a wonderful learning experience. Now I have gained enough confidence and knowhow to Mill the required Plates to build an Acro Laser System using the Acro Laser Sketchup Model. I have pulled the Model apart in Sketchup, isolated the Plates and generated the G-Code to cut/Mill the plates. I have used Sketchucam to generate the G-Code. I Use Mach3 on my C-Beam XL to Mill.
Build Author sybren Views 2519
80watt Lasercutter, workingarea 105x52[cm], steel frame
I will write a short buildlog here with mostly pictures. I designed this lasercutter in solidworks(not totally finished) for a good overview and such that the steel tubes could be lasercut by a company, the metal frame is based on the lasercutter the KÄSER, which you can find on cnczone.nl. The mechical parts are designed by myself because I had no mill to my use, so the mechnical parts are lasercut(same company as tube) steelplates welded together.
Build Author JerryD Views 2818
1500x1000mm Adjustable Height
I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.
Build Author Beam Views 4132
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author dodgenet Views 3337
Budget 1500mm OpenBuilds V-Slot Deltabot Build
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.