OTHER BUILDS/PROJECTS
Build Author OpenBuilds Views 5477
V-Slot Ventilator
The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.
Build Author rkugler Views 5410
Miter Saw Stop Block
Just starting a miter saw stop system. Any suggestions appreciated.
Build Author Ariel Yahni Views 5347
OB 2x72 Belt Grinder
Build a 2x72 Belt Grinder out of OpenBuilds V-Slots
Build Author Sonny Lowe Views 5347
MakerSL MSL-65 Manual Coffee Grinder Stand
I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.
Build Author cbordeleau Views 5266
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
Controlbox for a CNC Router
A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.
Build Author pek Views 5144
V-Slot Hand Cutting Jig
To help cutting v-slots with hand saw
Build Author Martin.Barfoed Views 5121
40x40 V-Slot Rod Type Linear Actuator
A Rod-type Linear Actuator based on the 40x40 V-slot profile
Build Author Mark Carew Views 5111
OpenCase Mounting Kit
The OpenCase Mounting Kit makes wire management quick and easy!
Build Author Sonny Lowe Views 5018
MakerSL MSL-7 Laser Cut Tape Dispenser
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
Build Author Anthony Bolgar Views 4879
Air assist/fume collector for Diode Laser Engraver
This is a work in progress
The Almost Perfect 3 Way Mitre (with MakerLinks)
A quick and easy way to make a 3-way mitered corner using MakerLinks
Build Author Gerrald Views 4766
Pong CNC
This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)
Pick and place
Pick and place based on the Openbuilds ACRO 20x20
Build Author 2SIsurf Views 4681
Hotwire cnc Surfboards
Xl 2 axis foam cutter Eps Surfboard blanks Simple open concept but high production machine. Shape 3d case with open builds controller
Build Author Mohsen Abbasi Views 4595
True Human Prosthesis
Prosthesis is functionality and emotion!
Build Author RJ_Make Views 4559
Fully Open Source Motorized Camera Slider Build Overview (OpenSlider)
This is a video were take a high level look at how I built up my version of a fully open source Motorized Camera Slider (OpenSlider)
M10CUBE PICO CNC. A Universal Controller
An attempt is to be a Unified Modular Controller based on M10CUBE platform. For GRBLHAL and MARLINHAL applications. HAL porting is under way 1 - WIZnet Pico Clone W5100S-EVB-Pico 2 v- 6 X StepStick. Not sure about the sixth driver, (Pico pins limitation) . External connectors for larger drivers 3 - Opto - isolated spindle PWM. 4 - HMI 5 - I/O on diferent modules and Ethernet 10MBPS communication. Patches will be written to GRBLHAL for Ethernet I/Os (Interrupted).
Build Author Joe Young Views 4487
Goliath - CNC + 3D printer Hybrid
Mostly for Mill work, and FDM 3D printing (mostly Nylonx). I'm currently in the process of adding some hardware for a project requiring lathe work. I've included a solidworks 2014 pack and go for those of you interested in the build. if you need another file type, just let me know and i can try to accommodate. This is a scratch build (electronics and hardware)... see photos. Everything is pretty close to industrial quality... Electronics too. I got sick of other COTS designs breaking down
Reborn as the Soccer Pitch for our Robot Spider Soccer game - Robotics/Maker Club Teaching Cart
The Soccer Pitch for our Robot Spider Soccer game
Build Author Spark Concepts Views 4380
MPG Jog Controller for CNC xPRO
Been playing around with an MPG Jogwheel
V-Slot MAME cabinet
A minimalist MAME "cabinet" made from extrusion.
AVR SMD Daughter Board
SMD AVR Solderless Daughter Board
Build Author mytechno3d Views 4261
Mining Rig
Crypto Mining rigs with vslot rail
Magnetic CNC Dust Shoe with LED lights and Camera*
Making my own magnetic dust shoe with led lights and a camera. Showing my progress from beginning to now.
Build Author Jacob Lotter Views 4187
CNC ESS Controls System
My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.
Build Author 3D Meister Views 4132
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Brewery tank supports
Trying to design modular and evolutive supports for my brewery tanks.
Makerparts Mpro Slider System
Makerparts.ca MPro Camera Slider System
7 Axis Camera Slider with Telescoping Vertical Lift
A six axis camera slider with a 7th LIFT axis added!
C-Beam Dust Shoe
A short description of the dust shoe I made for my machine.
Massive Hotwire Foam Cutter
CNC Hot Wire Foam Cutter. Lathe, Turntable and 4 axis Cutter. Can cut XPS and EPS.
Build Author Crazzy French Dude Views 3820
PeeNaPle_V1.4b
PeeNaPle_V1.4b is a BoB controller board for 3D Printers, CnC and cartesian machine, using the latest Teensy_4.1
Linear Rail for Dobot Magician
This is a simpel build of a Linear rail for the Dobot Magician.
Build Author Vegard Humlen Views 3811
CNC Coating Machine
The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.
MakerSL style vice - using just off-the-shelf-parts (NB UNTESTED WIP)
An attempt at copying the https://openbuilds.com/builds/makersl-msl-8-ob-vise.4084/ using just off-the-shelf OpenBuilds Parts - no machining
Build Author Cosmosteel Views 3684
Clear Acrylic Dust Shoe
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Cnc mill, Plasma cutting and weld table
A functional table for plasma cutting, welding, tooling........
KinectSkin
For all other builders and robotic technies!
Build Author ajdubs Views 3530
A custom arcade
This is an arcade "cabinet" of sorts built almost entirely from OpenBuilds extrusions. Save for a few 3d printed parts, the electrical components, the acrylic panels, and the monitor mount, every component was purchased from the OpenBuilds part store.
Build Author Jens Grabner Views 3464
snc98_Slash-Number-Calculator
This calculator work inside with a spezail count format - Fraction as Mantisse + Dezimal exponent .. in summ 9 Byte.
Build Author OpenBuilds Views 3447
Interface magnetic mount
A simple build that helps you to mount the OpenBuilds Interface to the front of your machine.
32 Button Hand Pendant for the PlanetCNC Control Board
This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.
Build Author Sergei Starovoitov Views 3314
Motorized mic stand
This system allows you to adjust the position of the microphone remotely
Automatic Sprayer
Automatic spray machine.
Build Author stepper Views 3300
Touch screen macro imaging
This is a brief overview of the build of my macro imaging slide.
Build Author Edgar Robles Views 3277
Sheethexapod
Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.
Build Author Cortellini Views 3271
The FEEDBACK FRACTAL Build
The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.
C-beam upgrades to my power tools
Just some repairs and upgrades to my drill press and mitre saw using c-beam.
Build Author RSch Views 3244
Scroll-saw Spiral Cutter
Attached to a scroll saw you can cut nested wooden spirals with this jig. Make two, three, four ... interlocking spirals that unwind/unscrew. Fascinating toys or art objects!
Wifi'not
A simple made hideaway for ugly electronics
Rail Builder
glue/staple/eject 1 Axis driven Rail building machine.
Build Author James Evanko Views 3112
Ball Trajectory Machine
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
Modular Controller PCBs
This is a build still in the prototype stage. The initial design is being used to control a 4 axis sample change, but the PCBs when finalized will be able to be adapted as a convenient way to wire stepper (or eventually hybrid stepper) drivers to which ever controller you happen to be using. Current developments center around an Arduino Mega, although more interfaces are planned in the future. The main design centers around the use of Phoenix Connectors.
DIN 35mm -like quick clip for 20mm extrusion
A half baked idea for mounting electrics and electronics using a 35mm-DIN-rail-like mounting.
Build Author Robert Huxford Views 2905
High Intensity Dive Light
Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.
Clock repair stand
Open source clock movement stand
Build Author Rodrigo Gonzalez Views 2874
Nightfuel
The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.
Build Author Ken376 Views 2842
Welded project cnc first try
Kind of hard to see in this pic now lining up drive s and finishing framework
T Nut Holder for V Slot
This is a T Nut Holder for OpenBuilds V Slot System. Useful when you want to keep t nuts in place, for example when you're mounting something vertically.
Build Author Quinnthouzand Views 2738
Mustardo - The Mustard Bot
The goal for this bot is to lay down mustard on sausages and burger patties in a smooth and sexy way that looks good for the camera.
Indoor Drumline Props
Triangular Towers
Build Author Hidro669 Views 2676
My custom world of tanks gaming desk built by Ragged Edge Eaming Solutions
summary huh... If it doesnt fit MAKE IT!
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
K-Cup Sealer
This is a K-Cup sealer i constructed does a fine job
Build Author Calotype Views 2607
My DIY panoramic rolling (&banding) Machine.
DO WHAT YOU IMAGINE !
Build Author Braden Masse Views 2574
Microwave Filter Tuner
The Microwave Filter Tuner (MFT) combined with the University of Regina’s tuning algorithm automatically tunes microwave filters by using a custom CNC machine with a computer vision system for identifying, mapping, and tuning each filter element, providing improved consistency, flexibility, and accuracy compared to traditional methods. The MFT is low cost and is capable of tuning multiple filter configurations with minimal preparation.
Build Author Anthony Castelluci Views 2571
Simple Camera Lofted Camera Slider
Build a manual camera slider.
Absolute positioning hardware and software
Absolute linear positioning using deBruijn sequences.
MOVABLE ART TO SCREEN WALL-MOUNTED TV
This project produced a movable framed canvas to cover a wall-mounted flat-screen TV when not being viewed, which at the touch of of a switch moves down below the TV and sound bar. The same switch is used afterwards to return the artwork up to cover the TV again. Photo shows mechanism without the canvas frame. See other photos.
Phlat Printer 3 meets Open Builds
I will go over the attachments for the PP3 Z axis. soon. Before any thing else .You need to know the first PP3 ,used SKP 7 and Mach 3. Later on they used CNC USB.
Screen Mesh Stretching
The intention of this project is so that the mesh is on the well stretched frame, and thus there is a better production of frames.
Build Author Cam Garrett Views 2400
Sturdy Motorized Photographic Copy Stand
i would like to build a sturdy motorized photographic copy stand. i have hobbled together a hand crank version using a used umbrella pole but it is not suitable as it is awkward and wobbly.
Build Author Linkreincarnate Views 2387
Amazon Special
I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,
Router Box
This box is made from tough aluminum with plastic boards, helps hold WiFi Routers, Modems, or/ Ethernet Switches! The aluminum can resist the heat produced by these electronics, and the weight of the electronics, also being light itself. This box is the thing you need to hold your electronic devices!
Build Author hbtousa Views 2348
Quack Ball
Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.
Remote Toiler Flusher!
This project provides an easy method for my granddaughter to use the facilities in the smallest room of the house! The toilet cistern is located in the garage and was originally manually activated by a pushbutton connected via a cable. The location of the pushbutton - combined with the stiffness of the mechanism made it tricky for her to use. This project provides a solution to the problem.
Angle grinder converted into electric drill
How to convert an angle grinder into an electric drill? Remove the angle grinder, leaving only one main motor, and then find a suitable intermediate roller with a point drill to assemble it.
Model train lift - scale HO
This build is about a model train lift in a secure and dust free storage. It is a roll on/roll off concept for a model train layout.
SharkBits Holder
Get organized with the SharkBits Holder!
Build Author Tristen Poliseno Views 2173
Back and forth rail mechanism
I have the whole description and all the details in the "Body" section!
Build Author David Hartkop Views 2171
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
Build Author Damian V-SLOT Poland Views 2113
LEGO BOX
Discover our unique DIY project that blends creativity, utility, and sustainability. This guide will take you through the construction of a LEGO display box, ingeniously crafted using offcuts of V-SLOT aluminium profiles and OpenBuilds accessories. Not only is this an eco-friendly approach to reusing surplus materials, but it also results in a stylish, functional display for your prized LEGO models. Whether you're a LEGO enthusiast or have little LEGO fans at home, this innovative project offers
Build Author Sir Bagels Views 2109
CNC Auto-pipette
Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering
Build Author mjenkins5720 Views 1995
Modified LEAD machine
At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.
Black Box/ Power supply brackets
This items are so cool that they need to be together, so I decided to create brackets that connect both pieces together
Custom push cart for CNC machines
I’m custom building a push table / cart for my cnc machines mostly out things I already had in my garage. Using a gray push utility cart as the main body and building around that.
Gluing frame for guitar tops and backs
I have built four of these frames. The first pictured I have been using for maybe a year or two and bought the clamps. The last three I have made I have built my own clamps with openbuild parts. I am still working on the design. At present I use wedges to apply pressure to the side of the wood and block. I am working on a cam system to apply pressure. I just bought 8mm screws with Knobs for quicker adjustment. I will update the build when I make these improvements.
Build Author Gary Caruso Views 1820
OpenPull From CNC Kitchen.. attempt
This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.
Gärschrank
A cabinet to keep a constant temperature for pizza or bread mother dough to grow.
Galvos
3d printable galvos
MIT E-Vent | MIT Emergency Ventilator
Ventilator prototype based of OpenBuilds Stock parts
Cnc od grinder and thread grinder
This is a totally original build of an od id grinder and thread grinder, I hope.
Small Slot Cutter
A build to cut .008 inch slots into JB Weld.
Everything Else
Hi my name is crispin and I'm an aluminum addict.
cnc back stop for brake press
back stop build
DRO
Belt drive linear scale for Mill and Lathe
Stinger-Panting Images in the Air
Stinger displays images in the air by using a single column of LEDs. Special computer code converts graphics to pixels; then, the pixels are send to the strings of LEDs, which with the help of of the motor's fast movement the most colorful are displayed on thin air.
Open Builds C-Beam K-cup holder
Making use of c-beam I have had left over from projects.
Pneumatic cnc cutter with festo drive
CNC Glass cutter