Build List
-
Active Filters:
fo
![Original PhlatPrinter](https://openbuilds.com/data/article_images/l/0/95.jpg?t=1389473544)
Build Author
Mark Carew
Views
71177
Original PhlatPrinter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Phlatprinter foam cutting CNC machines are awesome space saving mills that use a rotary axis as a sheet feed.
![myOX : a 4' x 2' OX CNC with potential](https://openbuilds.com/data/article_images/l/0/915.jpg?t=1458009996)
Build Author
Serge E.
Views
59065
myOX : a 4' x 2' OX CNC with potential
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
![FARM OX (Four Axis Rotary Machine)](https://openbuilds.com/data/article_images/l/2/2415.jpg?t=1438353710)
Build Author
ymilord
Views
55153
FARM OX (Four Axis Rotary Machine)
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
Four Axis Rotary Machine (FARM) OX. Equipped with a X,Z,A & C Axis.
Hot Wire 4 Axis CNC Foam cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
![PhlatPrinter MK 3](https://openbuilds.com/data/article_images/l/5/5207.jpg?t=1497557010)
Build Author
Mark Carew
Views
32541
PhlatPrinter MK 3
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.
![C3DO](https://openbuilds.com/data/article_images/l/5/5957.jpg?t=1511666318)
Build Author
crypt-tek
Views
32322
C3DO
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
Suitcase Vacuumformer
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Quick overview of my build up for a vacuum former that is self contained, portable and fairly easy to build.
![Vacuum Forming Machine](https://openbuilds.com/data/article_images/l/5/5071.jpg?t=1495496199)
Build Author
rengelking
Views
29651
Vacuum Forming Machine
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Vacuum Former built with off-the-shelf parts, works perfectly every time!
Open source large format CNC-machine and 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
For a schoolproject we decided to build this large format CNC-machine. The greatest part of the mechanics were sourced from OpenBuilds.
![Workhorse 3D Printer](https://openbuilds.com/data/article_images/l/8/8576.jpg?t=1633485374)
Build Author
shanehooper
Views
25588
Workhorse 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large 600mm x 350mm x 350mm Build Volume with lead screw driven motion. The printer build has a moving gantry and fixed heat bed. Open Source
Phlatformer v2
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=1389472370)
Hello, I have been looking around for a vacuum forming machine for a long time, and could not find one that was either in my price range or was safe enough for me to want in my home. The Phlatformer answers both of these requirements... Unfortunately, it was not available in either cut-out or...
![(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in](https://openbuilds.com/data/article_images/l/6/6205.jpg?t=1515766125)
Build Author
nc3dpw
Views
20737
(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.
![OpenBuilds Table Series](https://openbuilds.com/data/article_images/l/9/9585.jpg?t=1606518488)
Build Author
OpenBuilds
Views
19344
OpenBuilds Table Series
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The OpenBuilds Table Series offers a modular table structure that grows with your needs.
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18195
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
CNC Rotary Table Rotational Axis, A Axis B Axis 4th 5th Axis CNC Dividing Head
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first major project.
![CNC FOR EVERYONE!](https://openbuilds.com/data/article_images/l/0/596.jpg?t=1399598080)
Build Author
John J Talavera
Views
17376
CNC FOR EVERYONE!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.
Camera slider for stacking focus
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is just a small project to get use to the OpenBuild products.
![Upgrading the C-Beam machine](https://openbuilds.com/data/article_images/l/3/3473.jpg?t=1464068790)
Build Author
Ronald van Arkel
Views
15334
Upgrading the C-Beam machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Inspired by the Crawlbot
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Building a couple of CNC's based on the Crawlbot
![Generic Rigid 3D Printer (Currently on 1st Revision!)](https://openbuilds.com/data/article_images/l/0/998.jpg?t=1417837570)
Build Author
MechEng
Views
14292
Generic Rigid 3D Printer (Currently on 1st Revision!)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Rigid 3d printer with more than enough room for dual extruders. Easily expandable platform.
![Phlatprinter MKII](https://openbuilds.com/data/article_images/l/0/622.jpg?t=1395672747)
Build Author
Mark Carew
Views
13691
Phlatprinter MKII
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Phlatprinter MKII Foam Cutting Machine
2 GANTRY CNC HOTWIRE MACHINE
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A 2 independent gantry affordable hotwire machine.
CNC Hot Wire Cutter 4 Axis for Cutting Foam Wings
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My build is to allow me to cut foam wings using CNC Hot Wire Cutter.
![CNC FOR EVERYONE TITAN CNC ROUTER](https://openbuilds.com/data/article_images/l/0/730.jpg?t=1399677926)
Build Author
John J Talavera
Views
10932
CNC FOR EVERYONE TITAN CNC ROUTER
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
www.cncforeveryone.com TITAN CNC ROUTER is the perfect PCB milling machine or for smaller projects. Don't be fooled by its small size it is capable of routing with the big boys...!
CNC Hotwire Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Here is my first ever CNC build. A CNC Hotwire Foam Cutter. I will update about achievements. I would love to read from you guys - advices, ideas. Especially regarding the electronics. I feel confident with the hardware part which I can't say about the electronics part.
![Folger-Tech Y-Carriage](https://openbuilds.com/data/article_images/l/2/2848.jpg?t=1448208474)
Build Author
Sonny Lowe
Views
9819
Folger-Tech Y-Carriage
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This a redesign of the Folger-Tech Y-Carriage using the Solid V-Wheels, Ball Bearings, the V-Slot Rail System.
Large format plasma ox
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I will update this as I go, cad files upon request. My x beam is basically a belt driven r7
![Fina](https://openbuilds.com/data/article_images/l/2/2126.jpg?t=1431809622)
Build Author
Kyo
Views
9697
Fina
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is Fina; My Lautr3k inspired build.
![bor 454-D](https://openbuilds.com/data/article_images/l/9/9915.jpg?t=1619635519)
Build Author
Mike Campbell
Views
9247
bor 454-D
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A large format, modular, rack and pinion build designed around OpenBuilds components.
![Naomi Wu's Automatic Bartender- BarBot!](https://openbuilds.com/data/article_images/l/6/6597.jpg?t=1519192094)
Build Author
Naomi Wu
Views
9071
Naomi Wu's Automatic Bartender- BarBot!
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
A very affordable CNC routing
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
In progress CNC, (just design for the momment), I want to get some feedback about the design and the possible flexion of the aluminum profiles chosen
The Budget Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An affordable large CNC machine, that so far has been easy to assemble
![Dual Extruders 3D Printer - Zidex Upgraded](https://openbuilds.com/data/article_images/l/9/9102.jpg?t=1578282133)
Build Author
David Florian
Views
8592
Dual Extruders 3D Printer - Zidex Upgraded
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.
Laser cutter project by students
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This build is made by students from Fontys Hogescholen Eindhoven, department Engineering. Every quarter a new group continues the work of the previous group. We have been working on the project since september 2015, and as it is a work in progress, a lot will be added later. The first months have mainly been about designing and building an XY-table on which later all the electronic components will be added and the laser.
![LayerFused X301 - CoreXY Large Volume Printer](https://openbuilds.com/data/article_images/l/9/9491.jpg?t=1598379323)
Build Author
Robert Mech
Views
7799
LayerFused X301 - CoreXY Large Volume Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.
![RoboFoamCutter](https://openbuilds.com/data/article_images/l/0/505.jpg?t=1391725995)
Build Author
Colin Russon
Views
7766
RoboFoamCutter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Lead screw based Foam Cutter that can easily be adapted to full belt / pinion drive and to CNC.
XYZ Factory Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Very large format build platform designed really for printing multiple items in one session ether all the same or different. Longer term I would like to have multiple X axis on the Y axis rail. bit of a slicer challenge though.
![CNC FOR EVERYONE, THE DUCK!](https://openbuilds.com/data/article_images/l/0/734.jpg?t=1399679659)
Build Author
John J Talavera
Views
7470
CNC FOR EVERYONE, THE DUCK!
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
www.cncforeveryone.com. the Duck is something that i think would be helpful in my shop since we already do cold casting.
3D Printed Solid - Large Format Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
I need a large build plate without spending 10-20k for a "store" built printer.
![Portable Foam Cutter](https://openbuilds.com/data/article_images/l/1/1191.jpg?t=1412514842)
Build Author
Mohsen Abbasi
Views
7083
Portable Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A portable foam cutter to make your forms everyware using a LiPo Battery.
![Rotomolder](https://openbuilds.com/data/article_images/l/0/618.jpg?t=1395618265)
Build Author
John J Talavera
Views
6812
Rotomolder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple low cost rotomolder.
![Modular Desktop Vacuum Former](https://openbuilds.com/data/article_images/l/10/10098.jpg?t=1636207085)
Build Author
lekey
Views
6795
Modular Desktop Vacuum Former
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
This is a small desktop vacuum former that can be connected to a shop-vac and an electric heat source (like a grill for instance). You can control the time each appliance stays turned on, and the vacuum is automatically turned on when the tray is placed on top of the model. The vacuum table is 20x20cm wide, and I've tested it mostly with 1mm thick PET sheets.
![BA3DP](https://openbuilds.com/data/article_images/l/7/7789.jpg?t=1541092454)
Build Author
Bob Darrow
Views
6589
BA3DP
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
A slightly more than one half cubic meter 3D Printer using V Rails, V Rollers, "C" Rail, mounting plates, and a bunch of 3D printed brackets to provide strength and stability to the frame. Rigidity was the goal and precision and accuracy the result. The software is a whole other topic, many weeks spent dialing that in to make the printer print.
Based on 608 tube Plasma Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Simple steel tube design Plasma water table
![USB Hot Wire CNC Foam Cutter](https://openbuilds.com/data/article_images/l/8/8770.jpg?t=1566283532)
Build Author
rcKeith
Views
6143
USB Hot Wire CNC Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.
![Remote Controlled Robot Spider(Teaching Tool)](https://openbuilds.com/data/article_images/l/3/3971.jpg?t=1474380304)
Build Author
Jose A. Molina
Views
6033
Remote Controlled Robot Spider(Teaching Tool)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This Project is meant to teach introductory robotics and arduino styled micro-controllers to HS and MS students.
![Frezar - Desktop CNC](https://openbuilds.com/data/article_images/l/8/8719.jpg?t=1563670637)
Build Author
Fábio Pires
Views
6026
Frezar - Desktop CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
![C-beam Delta Printer](https://openbuilds.com/data/article_images/l/4/4562.jpg?t=1487614401)
Build Author
Kyo
Views
5611
C-beam Delta Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large scale delta robot using c-beam as the core frame component.
![Rostock TETRA V0](https://openbuilds.com/data/article_images/l/4/4091.jpg?t=1478477284)
Build Author
crystaldragon141
Views
5603
Rostock TETRA V0
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is an experiment to build a Linear Delta Printer using four towers instead of three. Primary reasons: 1. Build area is roughly cubic vs roughly cylindrical 2. Greater speed and precision from additional control provided by fourth tower. 3. Symmetric kinematics from even number of towers.
![ACRO 1010 with custom Z axis](https://openbuilds.com/data/article_images/l/9/9879.jpg?t=1617581867)
Build Author
Jacob Christiansen
Views
5388
ACRO 1010 with custom Z axis
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.
Stabilus 3d Large Format Printer Kit
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stabilus 3d Large Format Printer Kit
![OxZilla](https://openbuilds.com/data/article_images/l/3/3025.jpg?t=1451364835)
Build Author
Gary Bonard
Views
5229
OxZilla
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
![Lead 1010 Build - Anything but stock.](https://openbuilds.com/data/article_images/l/9/9206.jpg?t=1582316575)
Build Author
Forestbird Originals
Views
3954
Lead 1010 Build - Anything but stock.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.
![777 CNC Build](https://openbuilds.com/data/article_images/l/5/5922.jpg?t=1511205855)
Build Author
patdee
Views
3946
777 CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
To begin the "Build" I have ordered a few parts from OpenBuilds to get started. They are arriving today; according to "tracking". I cant wait! Praise Jesus! This 85 yr old man is getting a "New " life. Hallelujah and amen. Because I am building this on an existing machine, I have to be careful; so I will order some parts then see what I don't need (such as a base); along with parts that I may need to adapt it to the machine. It should be fun! "Caint wait!"
The Artist Formerly Known as Prints
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Work in progress large volume CoreXY printer
Massive Hotwire Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
CNC Hot Wire Foam Cutter. Lathe, Turntable and 4 axis Cutter. Can cut XPS and EPS.
Voxel Evolution
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a remix of Marshal Peck's Voxel OX, with some design tweaks inspired by Makerparts and jjcolletta. It has a build area of 300mm X 300mm X 480mm, but is easily configured for just about any build area up to 500mm X 500mm X 750mm. I have used some laser cut acrylic plates and a couple of 3D printed parts in its construction, however it can be assembled using nothing but OpenBuilds parts with the exception of the heated bed and the Y axis carrier for the heated bed.
![CNC Coating Machine](https://openbuilds.com/data/article_images/l/7/7953.jpg?t=1543672707)
Build Author
Vegard Humlen
Views
3811
CNC Coating Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.
![4x8 CNC Router for Composites](https://openbuilds.com/data/article_images/l/10/10132.jpg?t=1637812788)
Build Author
Paul Amelang
Views
3709
4x8 CNC Router for Composites
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Router for making plugs for composite part production, and for cutting CFRP.
![WorkBee Lead 1010, Reduced Footprint, Nema17](https://openbuilds.com/data/article_images/l/8/8650.jpg?t=1560690979)
Build Author
KronBjorn
Views
3648
WorkBee Lead 1010, Reduced Footprint, Nema17
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a WorkBee 1000x1000mm with lead screws and Nema17's. It has a reduced footprint, with the geared Nema's inside the frame.
![Transformer](https://openbuilds.com/data/article_images/l/6/6215.jpg?t=1516203998)
Build Author
George Motichka
Views
3018
Transformer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I wanted a machine that could easily switch between 3D Printing and Laser Engraving
![Reviving the Origonal PhlatPrinter with BlackBox](https://openbuilds.com/data/article_images/l/9/9928.jpg?t=1621196022)
Build Author
theracermark
Views
2942
Reviving the Origonal PhlatPrinter with BlackBox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area
![Mustardo - The Mustard Bot](https://openbuilds.com/data/article_images/l/9/9361.jpg?t=1595382429)
Build Author
Quinnthouzand
Views
2740
Mustardo - The Mustard Bot
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The goal for this bot is to lay down mustard on sausages and burger patties in a smooth and sexy way that looks good for the camera.
![Lead CNC 1010 Platform and Rotating Laptop Mount](https://openbuilds.com/data/article_images/l/9/9908.jpg?t=1619133278)
Build Author
ckgottabuild
Views
2722
Lead CNC 1010 Platform and Rotating Laptop Mount
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Moveable Lead CNC1010 build with handles on four corners. Everything fits on one sheet of cut out 4x8 plywood
Denford CNC Resurrection
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Denford CNC Mill Update
![Back and forth rail mechanism](https://openbuilds.com/data/article_images/l/9/9288.jpg?t=1586916302)
Build Author
Tristen Poliseno
Views
2174
Back and forth rail mechanism
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I have the whole description and all the details in the "Body" section!
NotAnOx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
From plywood and linear rail to c-beam. I probably should have bought a kit.
THE BIG GREEN MACHINE
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
1500*1500*1900 (xyz) Biocomposite Pellet 3D printer
Gluing frame for guitar tops and backs
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
I have built four of these frames. The first pictured I have been using for maybe a year or two and bought the clamps. The last three I have made I have built my own clamps with openbuild parts. I am still working on the design. At present I use wedges to apply pressure to the side of the wood and block. I am working on a cam system to apply pressure. I just bought 8mm screws with Knobs for quicker adjustment. I will update the build when I make these improvements.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)