Build List
-
Active Filters:
ox
Ooznest Moded CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modded OX with full nema23 4 point support
![OXford (OX fortified)](https://openbuilds.com/data/article_images/l/1/1127.jpg?t=1411537319)
Build Author
d0rk1e
Views
6926
OXford (OX fortified)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
150x75 cm OX with additional Y axis supports and hopefully a working double belt system
My first OX build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
Square OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.
Ooznest OX CNC for Architecture Modell
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
While i achieved the desired taler Z axis this was very notable of the cost of the stiffness of the Y axis - the Y axis is now quite wobbly. i do not recommend such a big Z axis on a OX CNC machine where the requirement is a good precision.
![CUT SMITH](https://openbuilds.com/data/article_images/l/6/6396.jpg?t=1520571606)
Build Author
Weldsmith
Views
6677
CUT SMITH
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.
Arctic_Stingray CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.
OX CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.
![Pocket Ox (Sheetmetal)](https://openbuilds.com/data/article_images/l/2/2360.jpg?t=1436691138)
Build Author
openhardwarecoza
Views
6383
Pocket Ox (Sheetmetal)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Small CNC - made with some custom lasercut+bent sheetmetal parts + Openbuilds V Slot
Builder Bob's CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Here is the consolidation of my woodworking shop, a CNC Router!
![Fixed Gantry Welded Steel Router](https://openbuilds.com/data/article_images/l/4/4776.jpg?t=1490226012)
Build Author
Matt Barile
Views
6210
Fixed Gantry Welded Steel Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress
Small Red OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small router for thin plate stock
Meister-CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a cnc router with 3 axis and a kress 1050 motor. Its 140x120cm and a homebuild with your help!
![C-Beam Mods](https://openbuilds.com/data/article_images/l/8/8929.jpg?t=1571893487)
Build Author
tmadrms
Views
6107
C-Beam Mods
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam machine mods.
HardKnot OX 4x4
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.
Modified OX CNC Router (1000x750 mm)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX Router I'd like to modify to improve the frame rigidity and resolve some alignment problems
![Frezar - Desktop CNC](https://openbuilds.com/data/article_images/l/8/8719.jpg?t=1563670637)
Build Author
Fábio Pires
Views
6025
Frezar - Desktop CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
![Micro Ox 2 x 2](https://openbuilds.com/data/article_images/l/1/1903.jpg?t=1426442709)
Build Author
Hytech2k
Views
6024
Micro Ox 2 x 2
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Micro Ox Build
![Laguna Swift 4X4 CNC mill retrofitted with OpenBuilds](https://openbuilds.com/data/article_images/l/10/10012.jpg?t=1626972458)
Build Author
Quentin Karmark
Views
5979
Laguna Swift 4X4 CNC mill retrofitted with OpenBuilds
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Used Laguna Swift 4X4 CNC mill with Water-cooled Spindle and RichAuto serial pendant retrofitted with OpenBuilds/Blackbox/Interface
Aluminium Router From Dubai
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Another modification on the OX
Ooznest build - 1500mm x 1000mm
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.
![BD's Burn Box - ACRO Laser Engraver System](https://openbuilds.com/data/article_images/l/9/9010.jpg?t=1574574338)
Build Author
Bruce Walker
Views
5866
BD's Burn Box - ACRO Laser Engraver System
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.
First Ooznest OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The ooznest OX CNC Machine is based on the OX CNC Machine designed by Mark Carew of Openbuilds, and incorporates many upgrades from the Openbuilds community. Mark Carew based the OX on the Routy, which was in turn based on the Shapeoko
![OXENlarged](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Zootalaws
Views
5762
OXENlarged
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a 1500 x 1500 Ox build
Large OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A larger version of the OX.
Zebu ( OX clone with Brasil materials)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
An OX clone with alternative parts.
My first build: a other OX CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I love to build things. I decided to build a CNC machine to help me build more things! I had a lot of fun and I learn a lot of thing in the process of building this machine. p.s. my primary language is french not english. Forgive me if I made some mistake.
![Voxel OX with Helix Gear Z Transmission (single z motor)](https://openbuilds.com/data/article_images/l/7/7174.jpg?t=1527989225)
Build Author
thehans
Views
5467
Voxel OX with Helix Gear Z Transmission (single z motor)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a modification I made to my Voxel Ox 3D Printer Z axis, which synchronizes the Z leadscrews via a shaft and helical gear transmission. It prevents the two Z leadscrew from getting out of adjustment relative to each other, and uses a single Z motor instead of two. This build is just documenting the specific changes I have made to the Z-axis, since the frame and other axes are still from the original Voxel Ox design.
![Ooznest WorkBee 1000mm x 1000mm Screw Driven](https://openbuilds.com/data/article_images/l/7/7043.jpg?t=1524235621)
Build Author
Hussein Dermay
Views
5401
Ooznest WorkBee 1000mm x 1000mm Screw Driven
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.
KerryH's OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My adventure in CNC routing.
The MULE (an OX inspired 3-axis CNC)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Mule is a 3-axis CNC inspired by the OX CNC by Mark Carew. This machine borrows the OX's sturdy frame and upgrades the X and Y linear actuators through the use of three 500mm lead screws (as opposed to the belt system of the OX). The result is an inexpensive, sturdy, and powerful design built for cutting tough materials such as aluminum.
![OxZilla](https://openbuilds.com/data/article_images/l/3/3025.jpg?t=1451364835)
Build Author
Gary Bonard
Views
5229
OxZilla
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
Custom Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Custom black and red Big Ox
Lead CNC build, Mansfield, Texas - BUILD COMPLETED WITH REVIEW OF THE KIT
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.
Controlbox for a CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.
Vic Aussie Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Dove in and ordered the kit from Makerstore in Melbourne. While awaiting for the order watched videos and sourced steppers and controllers from China. Had some fun with the 4 axis TB6600 controller board. Ran into a few problems with the build, but after stripping and restarting looks like I am on track.
![Dust Shoe for Colt router and OxCarve](https://openbuilds.com/data/article_images/l/3/3002.jpg?t=1451105673)
Build Author
Steve Marsh
Views
4884
Dust Shoe for Colt router and OxCarve
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A simple 3D printed dust shoe for the cnc router. 2 parts held together with magnets for easy bit changes.
ChadRat's ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first cnc router. I like the open builds concept. I bought parts when I had the money. It seems everytime i think i have all the parts, i find something I am missing. My controller won't be ready until the end of the month so I am in no hurry. I will add things that i find. Eager to make some saw dust.
OnyX-13
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my OX. There are many like it, but this one is mine. My OX is my best friend. It is my life. I must master it as I must master my life.....
Stainless OX kit
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits
Schematix Ox-Metal Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A build of Schematix's Ox-Metal design, with a 0.8kw watercooled spindle.
My C-Beam machine...
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A C-Beam machine design, strengthened with extra brackets and plates. GRBL controlled, opto-isolated inputs, jogging box.
SUPER OX NEMA 34 1600 OZ Motors!!!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC OX 1500X3000
Little Big OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A complete CNC newbie is tackling a mighty challenge, Not only is he making a CNC router, He's going to try and upsize it.
CrOX Carbon Reinforced OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modified OX with carbon fiber reinforced X and Z axes. 1500mm Y, 1000mm X and 120mm Z clearence
![Ooznest Ox CNC 1000 x 750](https://openbuilds.com/data/article_images/l/7/7029.jpg?t=1523991456)
Build Author
Kevr102
Views
4605
Ooznest Ox CNC 1000 x 750
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A few mods on my Ooznest supplied Ox cnc Encountered a few minor issues along the way but now all sorted.
Pure Cbeam 900x1000
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
Cancelled - Modified OX CNC for Mitre Cutting (Picture Framing)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Creating a CNC mitre (45°) cutter, for picture frame cutting. Starting with an OX, but inverting various parts and adding a material table, with a stepper-controlled measuring guide.
Gary's Mod Plates for OX Heavy Duty X and Z
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Gary's take on the OX HD X and Z plates, making it stiffer, adding mini wheels to the C-beam and Quick removable Z axis.
CBeam OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture
EOX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Open builds style wood CNC router. Usable work aria 1000mm x 1250mm x 150MM (X x Y x Z). 80x40 C bleam for the Y axis , two 60x20 beams for X axis and a 60x20 fo Z. Interlocking GT3 belts for X and Y. Looking to change over to a rack and pinion system in the future. 8x8Tr Lead screw for the Z. Leadshine HBS507 close loop drivers and 3-phase servo motor 573HBM20-EC-1000 motors driving the Y and X axis. Would recommend them to anyone looking for servo like performance at a affordable price.
The Ox That Wood
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my story about my need for a CNC router on a budget that wound up in the $5K range !!! but I have a good belt drive Ox
![OX with a Custom Electronics Case](https://openbuilds.com/data/article_images/l/3/3579.jpg?t=1466441316)
Build Author
eddyg
Views
4166
OX with a Custom Electronics Case
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Embarking on my first build and trying to start with a clean setup by creating an enclosure box for my controllers and power supply.
OX (Large) CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building a Large OX CNC Open Build on a fold down table.
My 2nd cnc build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My new build to upgrade from my worn out shapeoko
Plasma CNC machine
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.
![Lithgow Mens Shed CNC build](https://openbuilds.com/data/article_images/l/7/7875.jpg?t=1542793638)
Build Author
RobFromLDMS
Views
4073
Lithgow Mens Shed CNC build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The tale of how we put together our CNC Router, and some of the difficulties encountered. It is now ready for final testing and commissioning.
Stargeezer Vertimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Next up will be the electronics package. My parts bins are overflowing with boards so this may be the hardest decision to make of the entire build.
The FOX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be an OX based machine which I've designed to make the best use of my materials, be as precise as the design allows and operate as quietly as possible. I live in an apartment complex so space and noise are two important factors for me. Therefore the machine needs to do as much as possible while using little space and not annoy the neighbours.
![The D & R TigerPaw Trilogy](https://openbuilds.com/data/article_images/l/8/8729.jpg?t=1564161580)
Build Author
Lasersc
Views
3808
The D & R TigerPaw Trilogy
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Hopefully this will be a quick guide to one way that you can add a laser to an existing CNC router.
My C-Beam build and modifications
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modified C-Beam which I plan to add a laser module and eventually convert to C-Beam XL size.
Sphinx 1000 x 500
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building a Sphinx based CNC based on Kyo's plans. Going with a 1000 x 500 table size.
EOX v2
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgrading my CNC router to run on ball screws. Me and the belts where not getting along.
![Opening into doors](https://openbuilds.com/data/article_images/l/6/6336.jpg?t=1517233364)
Build Author
ShockingTops
Views
3540
Opening into doors
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.
![South Carolina Workbee 1000X1000](https://openbuilds.com/data/article_images/l/8/8531.jpg?t=1557780245)
Build Author
RV6APilot
Views
3405
South Carolina Workbee 1000X1000
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.
Norwegian OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build is based of Ooznest 's OX CNC Mechanical kit (500x750) with a few mods if all goes as planned.
![All metal Ox hybrid CNC Router Table](https://openbuilds.com/data/article_images/l/6/6541.jpg?t=1519000616)
Build Author
Denis Lapratte
Views
3360
All metal Ox hybrid CNC Router Table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is my second CNC build, but the first one that I design from the ground up. The base is all metal because I want to add Plasma facility later on. I used the Ox model for the gantry plates and made a few changes to adapt to my design. Since I wanted to use parts from my first CNC to save as much as possible, I kept the 5/8 Hi-Lead Screw I had from Roton for the Y and Z axis. I will also add a downdraft table to keep all parts tight on the table for cutting.
![Sheethexapod](https://openbuilds.com/data/article_images/l/4/4220.jpg?t=1481407627)
Build Author
Edgar Robles
Views
3277
Sheethexapod
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.
Wifi'not
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple made hideaway for ugly electronics
![Ball Trajectory Machine](https://openbuilds.com/data/article_images/l/7/7887.jpg?t=1542989748)
Build Author
James Evanko
Views
3110
Ball Trajectory Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
![Need a catchy name - enlarging CNC](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
McAdam
Views
3053
Need a catchy name - enlarging CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts
![Reviving the Origonal PhlatPrinter with BlackBox](https://openbuilds.com/data/article_images/l/9/9928.jpg?t=1621196022)
Build Author
theracermark
Views
2937
Reviving the Origonal PhlatPrinter with BlackBox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area
![ALl included interface](https://openbuilds.com/data/article_images/l/10/10441.jpg?t=1680974870)
Build Author
Sigifredo Cruz Rojas
Views
2869
ALl included interface
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I have not too much space and need a portable solution, and tired of cleaning the electronics I decide to put everything inside a box and this is the result.
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
![MY first CNC build](https://openbuilds.com/data/article_images/l/10/10348.jpg?t=1662935771)
Build Author
Jasont
Views
2612
MY first CNC build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
my first cnc build using the lead 1010 to build bigger and better!!
Denford CNC Resurrection
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Denford CNC Mill Update
![LEGO BOX](https://openbuilds.com/data/article_images/l/10/10457.jpg?t=1687254602)
Build Author
Damian V-SLOT Poland
Views
2112
LEGO BOX
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Discover our unique DIY project that blends creativity, utility, and sustainability. This guide will take you through the construction of a LEGO display box, ingeniously crafted using offcuts of V-SLOT aluminium profiles and OpenBuilds accessories. Not only is this an eco-friendly approach to reusing surplus materials, but it also results in a stylish, functional display for your prized LEGO models. Whether you're a LEGO enthusiast or have little LEGO fans at home, this innovative project offers
Black Box/ Power supply brackets
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This items are so cool that they need to be together, so I decided to create brackets that connect both pieces together
An other Ox Metal Build AZ
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Had left over parts from cnc plasma build.
Ox cnc improvements chain driven
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Just ox cnc experiment
![ProLight 1000 Mill Retrofit](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Johnny Reich
Views
1083
ProLight 1000 Mill Retrofit
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Update a 20-year old bench top milling machine with OpenBuild Ecosystem electronics.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)