H-Bot and Core XY
Build Author crypt-tek Views 22701
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
Build Author Carl Feniak Views 245167
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
Build Author Troy Proffitt Views 29995
Double D-Bot 400mm x 400mm x 600mm
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
Build Author maverickccie Views 12925
D-BOT With Mods
What a way to learn about 3D printing
Build Author alan richard Views 34070
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
Build Author SOA Views 14100
GridBot Two: Powerfully Simple
Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints. 300 x 300 x any build volume. Just change out the Z lead screws, rods, and four pillars. Total BOM around $700 USD. Build time around 4 hours.
Build Author j0achim Views 8337
CoreXY - e3d inspired
CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.
Build Author JOSH.PIERCE Views 25647
CoreXY W/ Fixed Build Plate & Enclosure
Building a Core XY printer with a fixed build plate from off the shelf parts.
Build Author Rat Rig Views 12642
Rat Rig V-Core 3D Printer ( Core XY )
Fully OpenBuilds based Core XY printer design by Rat Rig. CAD files, build manual, build videos available!
Build Author Keith Davis Views 18928
This design should give the same performance as the high speed Ultimaker since it uses a similar ultra-light X/Y concept which eliminates any movement of both the X and Y motors to achieve X/Y travel.
Build Author idegraaf Views 7514
Build Author Adam Filipowicz Views 42272
TITANXY (Fixed Build Plate, Quad Z Screw, CoreXY)
Super Rigid CoreXY 3D Printer
Build Author Keith Davis Views 18412
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
Build Author Aleksandar Views 13306
Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off.
Build Author Keith Davis Views 30716
A compact, enclosed Core XY design, based on off-the-shelf parts.
Build Author BeTrue3D Views 14780
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
Build Author Roy Berntsen Views 12706
V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source
Build Author Filipe Jose Views 17648
The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.
Build Author runninfarmer Views 23299
Build Author lenne0815 Views 14261
Hurricane - Large 80cm x 80cm x 80cm cm build space project
Huge - Fast - Affordable
Build Author Mark Rehorst Views 5392
Ultra MegaMax Dominator CoreXY Printer
My self-designed and built, tall-format coreXY printer with 300 x 300 x695 mm print capacity.
Build Author Steven Bloom Views 20225
BAFP 3D Printer
A New Core XY Printer build. BAFP stands for Big And Fast Printer. It will be awesome !!
Build Author CoreCube3D Views 12387
CoreCube3D - A CoreXY 3D Printer
Building a CoreXY based 3D printer using primarily parts from China on eBay. Large 500mm frame.
Build Author Roy Berntsen Views 8917
V-Baby CoreXY - Quality Engineered DIY 3d Printer
Easy to build - affordable opensource DIY CoreXY 3d Printer for fast reliable prototyping on your desktop - All wheels and V-Slots for smooth quick moves and opensource firmware on 8 or 32 bit controllers
Build Author Giuliano M Views 10211
CoreXY cube with 600x600x800 volume.
Build Author runninfarmer Views 10006
Build Author nc3dpw Views 10259
(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in
Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.
Build Author Peter Stoneham Views 8930
Large 'Double H-Bot' using Openbuilds 2040 v-slot
The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.
Build Author Tom West Views 13957
Hlidskjalf, CoreXYU (dual X-carriage)
Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.
Build Author crypt-tek Views 4743
The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.
Build Author Giuliano M Views 44974
H-Bot CoreXY Cube
Build Author uran Views 10111
TesseractXY (MendelMax 1.5 version)
History about making 3d printer.
Build Author Max Tepermeister Views 26311
A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.
Build Author MikeBardsley Views 8250
Fast, Large build area, CoreXY design
Build Author Herc Views 5082
DPR-v2 full metal
pictures and mony doku see later
Build Author Eric Kiser Views 6762
Live D-bot build at MRRF 2017 (Mar 25-26)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
Build Author TomH Views 13095
H-Bot CoreXY Cube with Fixed Build Plate
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
Build Author Ryan James Views 12126
A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.
Build Author Rob Altenburg Views 11908
Rob's D-Bot Build
The plan is to make this a fairly stock D-Bot build. We'll see if mods start creeping in.
Build Author jw117 Views 6360
Tower Printer H-Belt type printer Prototype
Build Author JCPhlux Views 15084
Large Core XY 3d Printer W/fixed build plate
Build Author Matt586 Views 4066
Kraken Core-XY Printer
Core-XY build witha quad nozzle
Build Author Shortyski13 Views 2057
Mushu - Large Scale CoreXY
20x26x28 inch Build Volume CoreXY. Unlike many builds, I've decoupled the XY movements from the Z-Axis lead screws to help prevent Wobble, will be using linear guide rails, and mains powered bed heater, and a bed that is Allowed to thermally grow. This build is JUST narrow enough to fit through a standard sized doorway.
Build Author Jovian Views 24898
A Large format 3D printer
Build Author Terone Burgenheim Views 3559
CoreXY - Tower Printer
I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.
Build Author Kaarbble Views 8423
Kaarbble Nylon Bot
We plan experiment on nylon 3 D printing;
Build Author yaman Views 2835
V5- 2in1 ( 3dPrint+laser Engraving )
2in1 ( 3dPrint+laser Engraving )
Build Author Fisher Views 2062
Core XY Beast
Super solid core xy build inspired by the e3d tool changer
Build Author Nwrgordon Views 12328
An easy Epic Win for novice engineers new to the RepRap project www.3distributed.com
Build Author Roberts Kristins Views 5254
Core XY My-BOT 500 x 500 x 1000
My first construction after many years buys ready devices.
Build Author mikethebomber Views 9014
A humble first time attempt at building a 3d printer from scratch
Build Author evolver56k Views 3001
The Artist Formerly Known as Prints
Work in progress large volume CoreXY printer
Build Author boubouexpress Views 3981
Double trolley X and Z belt training
Total belt drive GT2
Build Author Elxiliath Views 2317
D-Bot Version B
D-Bot with a Replicate controller.
Build Author Mash172 Views 6339
XYZ Factory Bot
Very large format build platform designed really for printing multiple items in one session ether all the same or different. Longer term I would like to have multiple X axis on the Y axis rail. bit of a slicer challenge though.
Build Author Lindsey Lewis Views 6276
CORE XY 3D Printer
This is an inexpensive build, large volume 2225 cubic inch, CORE XY 3D printer providing decent speed with precise and repeatable precision with expandable features.
Build Author changedsoul Views 3230
First CoreXY Build
First CoreXY. Simple Square build, hopes for faster movements.
Build Author techmod Views 5569
This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.
Build Author Shortyski13 Views 7730
A Large CoreXY build that can just barely get in through a doorway, aiming for under $1000. Build Volume approximately 18in x 24in x 26in.
Build Author Andrew Long Views 7606
CoreXZ implementation on 3d printer using Openbuild and RobotDigg parts.
Build Author Bon Thomassen Views 11623
D-Bot CoreXY printer
A CoreXY D-Bot 3d printer using gantries as wheel-carriages.
Build Author Anglesachse Views 6871
Corexy, with possible head change (3d, cnc, laser)
Build Author shanehooper Views 644
SolidCore CoreXY 3D Printer
Modular and Scalable CoreXY Printer with all metal parts.
Build Author Alex_Printing Views 787
Build Author Power Playground Views 2829
This is my own modified version of the D-Bot printer. I wanted to spec this printer to be able to print exotic materials at high accuracy with little to no compromises and maximum reliability.
Build Author Adam Filipowicz Views 2790
All Metal - CoreXY Motion
Stacked CoreXY Motion System using only Openbuilds components
Build Author THE LINK Views 3159
2020 First build.
Probably cheapest DIY build youl see.
Build Author boubouexpress Views 8344
3D Drucker sparkcube V1.1XL V-Slot™ Mini V Linear Actuator Bundle
sparkcube V1.1XL edit V-slot mini v linear
Build Author medicshort Views 1590
Just now in the planning phase of my build. Waiting for some parts to come in to see what I am going to build off of. Print area going to be close to 300x300x350. Trying to decide if I want it enclosed. I do want to print ABS... so probably so.