Build Author Elxiliath Views 175
D-Bot Version B
D-Bot with a Replicate controller.
Build Author nc3dpw Views 1489
(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in
Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.
Build Author Terone Burgenheim Views 1052
CoreXY - Tower Printer
I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.
Build Author crypt-tek Views 4473
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
Build Author medicshort Views 535
Just now in the planning phase of my build. Waiting for some parts to come in to see what I am going to build off of. Print area going to be close to 300x300x350. Trying to decide if I want it enclosed. I do want to print ABS... so probably so.
Build Author Keith Davis Views 6260
This design should give the same performance as the high speed Ultimaker since it uses a similar ultra-light X/Y concept which eliminates any movement of both the X and Y motors to achieve X/Y travel.
Build Author Ryan James Views 8396
A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.
Build Author idegraaf Views 2537
Build Author alan richard Views 16306
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
Build Author changedsoul Views 1816
First CoreXY Build
First CoreXY. Simple Square build, hopes for faster movements.
Build Author Roberts Kristins Views 1989
Core XY My-BOT 500 x 500 x 1000
My first construction after many years buys ready devices.
Build Author THE LINK Views 1815
2020 First build.
Probably cheapest DIY build youl see.
Build Author Rob Altenburg Views 7534
Rob's D-Bot Build
The plan is to make this a fairly stock D-Bot build. We'll see if mods start creeping in.
Build Author Troy Proffitt Views 12824
Double D-Bot 400mm x 400mm x 600mm
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
Build Author Shortyski13 Views 5089
A Large CoreXY build that can just barely get in through a doorway, aiming for under $1000. Build Volume approximately 18in x 24in x 26in.
Build Author Max Tepermeister Views 15362
A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.
Build Author Giuliano M Views 34124
H-Bot CoreXY Cube
Build Author Giuliano M Views 5755
CoreXY cube with 600x600x800 volume.
Build Author evolver56k Views 2183
The Artist Formerly Known as Prints
Work in progress large volume CoreXY printer
Build Author boubouexpress Views 2694
Double trolley X and Z belt training
Total belt drive GT2
Build Author Eric Kiser Views 5101
Live D-bot build at MRRF 2017 (Mar 25-26)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
Build Author maverickccie Views 8216
D-BOT With Mods
What a way to learn about 3D printing
Build Author techmod Views 4469
This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.
Build Author BeTrue3D Views 9353
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
Build Author Tom West Views 6309
Hlidskjalf, CoreXYU (dual X-carriage)
Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.
Build Author mikethebomber Views 6346
A humble first time attempt at building a 3d printer from scratch
Build Author Power Playground Views 2114
This is my own modified version of the D-Bot printer. I wanted to spec this printer to be able to print exotic materials at high accuracy with little to no compromises and maximum reliability.
Build Author Aleksandar Views 7298
Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off.
Build Author MikeBardsley Views 5556
Fast, Large build area, CoreXY design
Build Author uran Views 6285
TesseractXY (MendelMax 1.5 version)
History about making 3d printer.
Build Author Bon Thomassen Views 8794
D-Bot CoreXY printer
A CoreXY D-Bot 3d printer using gantries as wheel-carriages.
Build Author Lindsey Lewis Views 4616
CORE XY 3D Printer
This is an inexpensive build, large volume 2225 cubic inch, CORE XY 3D printer providing decent speed with precise and repeatable precision with expandable features.
Build Author Carl Feniak Views 191416
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
Build Author boubouexpress Views 5804
3D Drucker sparkcube V1.1XL V-Slot™ Mini V Linear Actuator Bundle
sparkcube V1.1XL edit V-slot mini v linear
Build Author Adam Filipowicz Views 24762
TITAN-XY (Fixed Build Plate, Quad Z Screw, CoreXY)
Super Rigid CoreXY 3D Printer
Build Author Steven Bloom Views 17056
BAFP 3D Printer
A New Core XY Printer build. BAFP stands for Big And Fast Printer. It will be awesome !!
Build Author runninfarmer Views 21030
Build Author JOSH.PIERCE Views 19291
CoreXY W/ Fixed Build Plate & Enclosure
Building a Core XY printer with a fixed build plate from off the shelf parts.
Build Author Nwrgordon Views 9441
An easy Epic Win for novice engineers new to the RepRap project www.3distributed.com
Build Author jw117 Views 5101
Tower Printer H-Belt type printer Prototype
Build Author lenne0815 Views 9861
Hurricane - Large 80cm x 80cm x 80cm cm build space project
Huge - Fast - Affordable
Build Author Keith Davis Views 13650
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
Build Author Mash172 Views 5123
XYZ Factory Bot
Very large format build platform designed really for printing multiple items in one session ether all the same or different. Longer term I would like to have multiple X axis on the Y axis rail. bit of a slicer challenge though.
Build Author Kaarbble Views 7480
Kaarbble Nylon Bot
We plan experiment on nylon 3 D printing;
Build Author JCPhlux Views 9520
Large Core XY 3d Printer W/fixed build plate
Build Author Filipe Jose Views 14599
The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.
Build Author Anglesachse Views 5832
Corexy, with possible head change (3d, cnc, laser)
Build Author Andrew Long Views 5887
CoreXZ implementation on 3d printer using Openbuild and RobotDigg parts.
Build Author TomH Views 11023
H-Bot CoreXY Cube with Fixed Build Plate
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
Build Author runninfarmer Views 8550
Build Author Keith Davis Views 21942
A compact, enclosed Core XY design, based on off-the-shelf parts.