Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    be

My Workbee 1010

Feb 2, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.

Shapeoko 1 upgrades

Mar 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

Replaced the original Z-axis for a shapeoko with a c-beam upgrade. This upgrade required a nema 17 mount and a quiet spindle mount I printed with a 3D printer.

Workbee 1010

Jan 11, 2020
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

Hey all looking forward to sharing this build, I’ve learned a lot reviewing many of these great builds.

South Carolina Workbee 1000X1000

Jun 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.

Black out Edition Workbee 1010

Nov 28, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Thanks to all the Open Build elves that meticulously package and wrap all the little tiny parts and pieces. I have put in a request to get you people a raise..

My 1st C-Beam Router

Aug 13, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Pretty happy with the build, had some difficulty with the software loading up the settings due to me using the wrong com.

WannaBe CNC - First time design and build

Apr 5, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Design Change - Version 2.0 has a smaller foot print, custom gantry supports, and front and back covers. I will use standard V-Slot for gantry supports leaving me enough travel to manufacture the customer supports with this machine when completed. then update to final build. I also plan to install the controller into the front cover and power supply into the back cover. Should be nice and tidy.

C-Beam Upgrade to Larger C-Beam

Feb 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

My goal was to be able to enlarge my C-Beam with as many original parts as possible. I was able to recycle almost all of them with a only the two 500 mm rails left over. I used 1000 mm rails for the X Axis and I added another complete Y Axis assembly. I chose to keep it simple and I am very happy with the result!

3D printed CNC Machine

Dec 28, 2019
Category
Other Style 3D Printers
Build Progress
Build in Progress...

So I thought I would make the Leon van den Beukel version three 3D printed CNC Machine, it is the third incarnation so you would expect a relatively bug-free CNC Machine with a strong foundation.

1 Cubic Meter 3D Printer

Mar 20, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is a at home built 1000mm x 1000mm x 1000mm 3d printer. It uses mainly parts from OpenBuild Parts and is very simple to build. The only thing that was custom was the build plate which was designed by myself and tooled at a local machine shop.

c-beam hello world

Jan 29, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

My first ever build. Straight C-beam with tinyg controller a few do-dads and some make do choices. Non-metric length lead screws to save long lead time. Jog knobs to cover the extra length and also practical. My old Bosch Colt never had it so good. Build out work remains, wire dressing, drag chain, vacuum, permanent base, etc.

Ball Trajectory Machine

Nov 23, 2018
Category
Everything Else
Build Progress
Build Complete!

Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.

Travel Printer

Jun 9, 2022
Category
Polar Bots
Build Progress
Build in Progress...

Build using standard parts as much as possible, Open Builds etc. To keep printer usable for more materials will be trying a heated bed with rotary elec union for the thermistor and power.

Sherline C-Beam with Offline Controller and MPG

Nov 23, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is a C-Beam based router with V-rails used for the bed, a Sherline spindle with Jacobs chuck, closed loop stepper motors on every axis and an offline 4-axis CNC controller. A U-channel was created to guide the drag chain on the X-axis.

The Domino - 1.5m x 1m

Oct 27, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

DIY scratch build consisting of gas pipe, skate bearings, 12mm birch, 3/4 maple v-core ply, Nema 23's, and arduino and CNC shield with DRV8825's.

Plate 'o CBEAM

May 3, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I'm starting with the c-beam bundle, and I hope to end up with a pretty useful little platemaker/shallow relief carver. I'm hoping to discover how accurate and efficient it can be.

C Beam CNC+Laser

Aug 19, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

You will be following the assembly of the mechanical kit and how i integrate the electronics into the final build.

HandCrafted WorkBee - HCWB

Sep 4, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.

C Beam Served

Jan 23, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

C Beam Machine built in a server cab. Hopefully this keeps every thing enclosed , clean and quite ?

Sturdy Motorized Photographic Copy Stand

Feb 1, 2023
Category
Camera Sliders - Rigs
Build Progress
Build in Progress...

i would like to build a sturdy motorized photographic copy stand. i have hobbled together a hand crank version using a used umbrella pole but it is not suitable as it is awkward and wobbly.

Bee the Boss

Jun 2, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.

Quack Ball

Mar 5, 2018
Category
Camera Sliders - Rigs
Build Progress
Build Complete!

Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.

Model train lift - scale HO

Mar 12, 2020
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

This build is about a model train lift in a secure and dust free storage. It is a roll on/roll off concept for a model train layout.

C-Beam Elexa

Sep 4, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

This build will be based on the C-Beam Plate Maker, with additional changes based on other builds and ideas.

My CNC

Jan 5, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.

C-beam charmer

Apr 21, 2022
Category
Other Style CNC Mills
Build Progress
Build in Progress...

Double C-beam Y axis 500mm., Double 2080 X axis 600mm. , C-beam Z axis 250mm, TB-6600 drivers, MKS-DLC32v2 GRBL w/wi-fi and blue tooth

Custom push cart for CNC machines

Mar 13, 2021
Category
Furniture Builds
Build Progress
Build in Progress...

I’m custom building a push table / cart for my cnc machines mostly out things I already had in my garage. Using a gray push utility cart as the main body and building around that.

C beam Larger and Stronger

Sep 3, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My first build based on the original C beam Sphinx. I’m not sure at this point what the final size will be. I have the parts from the c beam Sphinx and extra beams and lead screws to build up to 1000mm x 1000mm.

frugal-ist workbee

May 3, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

a 1000x1000 acme screw workbee built as frugally as possible. thanks so much to ooznest and openbuilds :)

ApiNui - CNC Router ( an oversized workbee )

May 23, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Based on the WorkBee CNC, this is an oversized router built with a specific use-case in mind, for manufacutring beehives, and beehive components

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice