Select a Category
Build Author Anthony Bolgar Views 3504
Air assist/fume collector for Diode Laser Engraver
This is a work in progress
Build Author DistortedDesigns Views 28496
Project Death Star - DistortedDesigns Laser Engraver
2 watt Laser Engraver, Simple, Fairly Low Cost, and Portable
Build Author james adair Views 1789
wanted large work area for laser etch/cuts more than spindle work.
Build Author openhardwarecoza Views 24234
openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)
A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter
Build Author Hytech2k Views 30439
Triple Shot R-P-M Area 51 CNC Parts
We wanted to create a rapid prototyping machine with excellent 3D printing, laser cutting and engraving, and light CNC router work capabilities.
Build Author Cipta inovasi Views 5097
laser gantry use mini v end block my own design
i always make laser cutting machine, but when i see openbuilds, this can make more cheap gantry for make laser cutting.
Build Author pinoaffe Views 2470
This is a stool, designed in 18mm wood for a cnc router, it's easily scaleable to different wood-thicknesses, in 18mm wood it takes up 1200*1200mm. It can be assembled without screws, nails or glue and can therefore also be easily disassembled.
Build Author Metalguru Views 8108
Small Laser Engraver Concept
Low cost Laser Engraver build using all off-the-shelf components.
Build Author Krishnakumar Views 5720
Hobby OX CNC
This "hobby OX" CNC is built for multiple purposes such as cutting and engraving various materials, laser etching and cutting, etc... Its a great platform for hobby enthusiasts like me where this machine can be used for so many different purposes effectively and efficiently!
Build Author MConner Views 6961
Fun and Functional Laser Build
A very fun and fulfilling build. I can't say enough about the whole Open Builds site and Open Source movement. I strongly believe this is the fastest and most creative way of getting ideas out of the mind, and onto the floor.
Build Author Asaku Views 6805
Hi! This build is, or at least should be, a multipurpose box (mBOX). Due to limited space I want to build something that can serve multiple purposes such as 3d printing, 3d scan, plexiglass cutting and hopefully some milling too (both wood and metal). Switching between modes should involve switching heads and worksurface (change heatbed with a wood platform and viceversa). (for the scan part I'm thinking of integrating this opensource project into the frame: http://www.freelss.org/ )
Build Author Anglesachse Views 6931
Corexy, with possible head change (3d, cnc, laser)
Build Author Simon Rafferty Views 5156
A Rigid Delta Printer using C-Beam screw actuators
Build Author Tim Butler Views 5571
CO2 laser cutter
A build which is based on a metal frame and aluminium plate which I salvaged from a skip. The frame is sized to hold 19" rack units so I'll build my control box into a 3U rack unit (also salvaged). The area available for the build is 700x1200mm. I'll sling a 60W CO2 tube under the base, the beam path will be initially upward into the enclosure.
Build Author AK-Creation Views 4484
Update for my 3D Printer - Big Size
I like combo machines, so I upgrade my 3D Printer with a Laser. It is a double head combination. The Laser is easy removable.
Build Author Jurgen Views 6825
laser add-on for C-Beam machine
3.8 W laser add-on for C-Beam machine. Can easily be swapped with the router.
Build Author Max_Sijbers_Mechatr... Views 8038
In the expo projects during the second year of engineering students. the project group who made this rapport made a laser cutter for the students of Fontys Hogeschool Engineering to use this machine for creating parts for their projects. The goal of Project Laser Cutter is to build a laser cutter, which is safe and can be used within the school. Also it has to be able to cut through 10 millimetres thick acrylic material or 10 millimetres thick plywood. This project will follow the V-model. This
Build Author andrizzle Views 4416
Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1
Build Author rusirius Views 11690
A CNC platform designed with swapable heads to do laser engraving/etching/cutting, routing and milling, as well as 3D printing.
Build Author Andrew Hague Views 7932
Laseroko Laser Engraver Build
After expanding a Shapeoko 2 with the rails and motors left over, make yourself a laser engraver.
Build Author Sonny Lowe Views 3621
MakerSL MSL-7 Laser Cut Tape Dispenser
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
Build Author oni305 Views 43969
Laser Engraver Control Board + Inkscape extension
This is a PCB designed to control a laser Engraver CNC
Build Author Shannon Jardine Views 6040
Large Laser cut table build
Large 6 x 10 foot laser table build. New to building CNC
Build Author Robert.sims Views 10983
What I want to build is a unit to: rout wood, plastic and occasional aluminium . to be able to swap cutters. i.e. drragknife, laser, router, drill
Build Author Tweakie Views 47722
Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.
Build Author Kermareg Views 15028
[EN] Build of my Multiple OX CNC. It's goal is to run in 2 differents modes : router and 3D printer modes. The router mode will allows the use of a laser diode or a standard spindle. [FR] Construction d'une CNC basée sur l'OX pour des usages multiples. Deux modes principaux sont prévus : l'impression 3D et l'usinage via une defonceuses. Le mode usinage permettra à l'avenir de placerune tête laser pour effectuer quelques gravures simples. Une version française : http://kermareg.be/?page_id=103
Build Author Sjors Views 6965
Laser cutter project by students
This build is made by students from Fontys Hogescholen Eindhoven, department Engineering. Every quarter a new group continues the work of the previous group. We have been working on the project since september 2015, and as it is a work in progress, a lot will be added later. The first months have mainly been about designing and building an XY-table on which later all the electronic components will be added and the laser.
Build Author Ridgeback Views 15532
Dual Extruder 3D Printer and Laser Cutter combo
Dual extruder 3D printer and laser cutter.
Build Author KBill Views 10946
MIY OLY Delta Printer
Mag arm deltabot with laser cut carriages and connectors.
Build Author michel pet Views 6516
core xy smoothie
i had som left over parts and i dit like to test the corexy control so this is wat i came up with. sorry bad englich.
Build Author openhardwarecoza Views 7205
3D Printer 320x220x200
Someone donated a E3D Volcano to me (http://e3d-online.com/Volcano/V6-VOLCANO-POWER-PACK-175-UNIVERSAL-24V) and with a super hotend like that, it feels like a waste to stick it into a small 3D printer. So I decided I want a 320x220mm (XY) machine, 200mm Z is plenty for me
Build Author openhardwarecoza Views 5594
Pocket Ox (Sheetmetal)
Small CNC - made with some custom lasercut+bent sheetmetal parts + Openbuilds V Slot
Build Author Mohammed Iskandarani Views 17571
CO2 60 -130 WATT LASER ENGRAVING/CUTTING CNC WITH DSP AWC608 CONTROLLER
LASER ENGRAVING DIY 60 WATT
Build Author Jovian Views 20528
Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool
Build Author DiggerJ Views 6633
Babe - The Big Blue (Laser) OX Build
A 1000 x 1500 OX build with the ability to router cut dovetails as well as laser engraving and light cutting.
Build Author JCPhlux Views 16310
Large 1500x1000 Laser V
I am building a Laser cutter based off Robert Hummel's Laser V design.