Select a Category
Build Author roadss Views 12189
Rawcnc 1.5 Desktop Edition
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
Build Author UltiBots Views 24769
Mini Kossel V-Slot 3D Printer
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
Build Author Mark Carew Views 7304
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
Build Author Rick Holder Views 8902
Gantry Type CNC with Makita Router
The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.
Build Author Savvas Views 9490
CNC Control Box with VFD etc etc
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
Build Author Spark Concepts Views 852
MPG Jog Controller for CNC xPRO
Been playing around with an MPG Jogwheel
Build Author ShockingTops Views 1759
Opening into doors
Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.
Build Author M^3 Views 12844
M Cubed 3 Axis Bluetooth CNC Controller
Low cost, Bluetooth enabled, 3 axis CNC controller. GRBL 0.9 compatible.
Build Author David Arroyo Views 10684
Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.
Build Author jz321 Views 1522
OTiS (Off The Shelf) is 500mm cartesian CNC that can be built with all off the shelf parts from OpenBuildsStore. It features C-Beam actuators and a V-Slot frame.
Build Author Spark Concepts Views 3584
CNC xPRO V4
Take your build to the next level with the CNC xPRO V4!
Build Author gonzachus Views 3611
1000 x 1000 Workbee powered by X controller
A standard 1000x1000 Workbee powered by an X-controller using a Hitachi router
Build Author Mallemann Views 1580
Generic 6 Axis Controller
Generic 6 Axis (Stepper) Controller
Build Author Mark Carew Views 1146
OpenCase Mounting Kit
The OpenCase Mounting Kit makes wire management quick and easy!
Build Author PhotoSgt85 Views 1753
Modular Controller PCBs
This is a build still in the prototype stage. The initial design is being used to control a 4 axis sample change, but the PCBs when finalized will be able to be adapted as a convenient way to wire stepper (or eventually hybrid stepper) drivers to which ever controller you happen to be using. Current developments center around an Arduino Mega, although more interfaces are planned in the future. The main design centers around the use of Phoenix Connectors.
Build Author James Evanko Views 757
Sherline C-Beam with Offline Controller and MPG
This is a C-Beam based router with V-rails used for the bed, a Sherline spindle with Jacobs chuck, closed loop stepper motors on every axis and an offline 4-axis CNC controller. A U-channel was created to guide the drag chain on the X-axis.
Build Author James Evanko Views 701
Ball Trajectory Machine
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
Build Author Gary Bonard Views 3810
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
Build Author Sprags Views 892
C-Beam Kyo Sphinx 10060
More stuff here.