Build List
-
Active Filters:
openbuild
![C-Beam Intro to CNC](https://openbuilds.com/data/article_images/l/4/4703.jpg?t=1490630165)
Build Author
Greg Lampman
Views
8166
C-Beam Intro to CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Build log for my first CNC machine, a C-Beam Plate Maker
![Delta-Six ( Jerry426 variant )](https://openbuilds.com/data/article_images/l/4/4005.jpg?t=1475265264)
Build Author
Martin Bogomolni
Views
10761
Delta-Six ( Jerry426 variant )
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a Delta-6 variant, using recycled parts from a WolfStock Delta printer.
Voxel OX Based Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
Building upon the great work done by Marshall Peck and others. I have started a new build.
BD's C-Beam Machine CNC Router (WIP)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC router table based on OpenBuilds C-Beam Machine bundle.
![Batxillerat Research Project: Design and construction of a CNC](https://openbuilds.com/data/article_images/l/0/939.jpg?t=1410273484)
Build Author
Pol Feliu
Views
7720
Batxillerat Research Project: Design and construction of a CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm working on a cartesian cnc router for my school research project
![M Cubed CNC Mill](https://openbuilds.com/data/article_images/l/1/1634.jpg?t=1421382482)
Build Author
M^3
Views
20526
M Cubed CNC Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A no-nonsense CNC mini mill to get the job done.
![My Belt & Pinion Drive CNC Router](https://openbuilds.com/data/article_images/l/2/2512.jpg?t=1440728708)
Build Author
Justin Butler
Views
7570
My Belt & Pinion Drive CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
![The MakerSL Customized OB Minimill](https://openbuilds.com/data/article_images/l/3/3647.jpg?t=1498037174)
Build Author
Sonny Lowe
Views
6021
The MakerSL Customized OB Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
MiniMill - A must have machine :)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The new MiniMill from Mark and Sonny is a great little machine.
![1.4 meter tall build height, 300x410mm build plate cartesian](https://openbuilds.com/data/article_images/l/4/4797.jpg?t=1490545360)
Build Author
J-Wahl Dezign
Views
8257
1.4 meter tall build height, 300x410mm build plate cartesian
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
![Stinger V Micro Mill](https://openbuilds.com/data/article_images/l/0/695.jpg?t=1398453371)
Build Author
Robert Hummel
Views
24380
Stinger V Micro Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)
OX AI
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform
Talos3D
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
In Greek mythology, Talos (/ˈteɪlɒs/;[1] Greek: Τάλως, Talōs) was a giant man of bronze made by Hephaestus (the Greek god of fire, metalworking, craftsmen and blacksmiths) who protected Europa in Crete from pirates and invaders. He circled the island's shores three times daily.
![L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes](https://openbuilds.com/data/article_images/l/3/3496.jpg?t=1467382176)
Build Author
Anthony Bolgar
Views
10634
L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.
openbuilds rovo c-beam (700*1000)(1000*1000)한국오픈빌드.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Open the build will create open and sharing. 오픈빌드는 만들고 오픈하고 공유합니다.
![CRH C-BEAM Router, steel capable](https://openbuilds.com/data/article_images/l/4/4663.jpg?t=1488314646)
Build Author
chenderson
Views
11255
CRH C-BEAM Router, steel capable
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam based CNC router using mostly openbuilds parts.
![Routy GT2 290 BSX CNC Router, Low Cost and Good!](https://openbuilds.com/data/article_images/l/2/2434.jpg?t=1439915037)
Build Author
Ronald van Arkel
Views
32365
Routy GT2 290 BSX CNC Router, Low Cost and Good!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
![Amazon Special](https://openbuilds.com/data/article_cat_images/l/0/295.jpg?t=1389472559)
Build Author
Linkreincarnate
Views
2386
Amazon Special
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,
![Budget 1500mm OpenBuilds V-Slot Deltabot Build](https://openbuilds.com/data/article_images/l/4/4396.jpg?t=1485280967)
Build Author
dodgenet
Views
5541
Budget 1500mm OpenBuilds V-Slot Deltabot Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
![Triple Shot R-P-M Area 51 CNC Parts](https://openbuilds.com/data/article_images/l/2/2307.jpg?t=1444529606)
Build Author
Hytech2k
Views
32597
Triple Shot R-P-M Area 51 CNC Parts
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
We wanted to create a rapid prototyping machine with excellent 3D printing, laser cutting and engraving, and light CNC router work capabilities.
![OX PPR - Portable Plasma/Router](https://openbuilds.com/data/article_images/l/1/1541.jpg?t=1445138069)
Build Author
Steve B
Views
14645
OX PPR - Portable Plasma/Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
![MUSK-OX](https://openbuilds.com/data/article_images/l/1/1706.jpg?t=1422401740)
Build Author
Larry_AK
Views
9279
MUSK-OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Pretty much a straight OPENBUILDS OX that slowly getting some modifications.
![X Y Table OpenRail / V-Slot Build Examples](https://openbuilds.com/data/article_images/l/0/62.jpg?t=1389473342)
Build Author
Mark Carew
Views
67712
X Y Table OpenRail / V-Slot Build Examples
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
![Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)](https://openbuilds.com/data/article_images/l/3/3576.jpg?t=1466396648)
Build Author
Tim Pierce
Views
12519
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
![CNC Line Boring Machine](https://openbuilds.com/data/article_images/l/3/3811.jpg?t=1470684250)
Build Author
Bridge Port
Views
7765
CNC Line Boring Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
![The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build](https://openbuilds.com/data/article_images/l/2/2815.jpg?t=1453269930)
Build Author
Peter Oakes
Views
41441
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
![Machined Aluminum MagBall Carriages](https://openbuilds.com/data/article_images/l/3/3538.jpg?t=1465670195)
Build Author
UltiBots
Views
9551
Machined Aluminum MagBall Carriages
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Machined Aluminum MagBall Carriages
1500 x 1500 mm OpenBuild CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1500 x 1500 mm OpenBuild CNC
![MakerSL MSL-7 Laser Cut Tape Dispenser](https://openbuilds.com/data/article_images/l/3/3368.jpg?t=1460023548)
Build Author
Sonny Lowe
Views
5018
MakerSL MSL-7 Laser Cut Tape Dispenser
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
![890KV OX RC spindle](https://openbuilds.com/data/article_images/l/0/411.jpg?t=1399994797)
Build Author
Robert Hummel
Views
68976
890KV OX RC spindle
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This build is intended as a light alternative to the Dremel rotary tool.
CNC Router (Non OX)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My own Design (not an OX Derivative) using standard Parts.
![Optical Limit + Home Switches](https://openbuilds.com/data/article_images/l/0/512.jpg?t=1391894204)
Build Author
The Dude
Views
19225
Optical Limit + Home Switches
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Optical home and limit switches for cnc, 3D printers, laser cutters, etc.
Routy GT2 300 BSX CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the first project that I would like to share with you. I know the build looks familiar and it is; it’s based on kram242´s Routy. Work area is 300*500*55 mm and is NEMA17/GT2 belt driven.
![OX CNC 4'x4'](https://openbuilds.com/data/article_images/l/3/3018.jpg?t=1451324809)
Build Author
zann68
Views
7735
OX CNC 4'x4'
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.
![OX-SUMO, SUMO-OX, OXSUMO?](https://openbuilds.com/data/article_images/l/2/2811.jpg?t=1446693241)
Build Author
evildean
Views
8013
OX-SUMO, SUMO-OX, OXSUMO?
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!
Wakezor
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm starting my first own build cnc machine which is inspired by routy and the ox. Were my goal was not to use the ox plates but use the standard plates available in the parts store for the design.
![Persnickety Plate Maker](https://openbuilds.com/data/article_images/l/2/2454.jpg?t=1439488214)
Build Author
motopreserve
Views
8312
Persnickety Plate Maker
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My very first attempt at a CNC build. Based on the OpenBuilds C-Beam Machine, small tweaks will be made to tailor it for my goals: machining G10, aluminum & some carbon fiber for use with multirotor and motorcycle parts. I am looking forward to the day when I am comfortable enough to bring the ideas in my head to the tip of the end mill in a smooth fashion...
C-Beam on X, Y and Z Attempting to use internal channel first go around
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam build using the small C-Beam gantry plates only.
![Work Bench Stand](https://openbuilds.com/data/article_images/l/2/2801.jpg?t=1446126556)
Build Author
Mark Carew
Views
8166
Work Bench Stand
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.
![the STD](https://openbuilds.com/data/article_images/l/2/2800.jpg?t=1446020246)
Build Author
Sam Dobbie
Views
6696
the STD
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A fully aluminium printer made from off the shelf components, no printed parts.
![MIY OLY Delta Printer](https://openbuilds.com/data/article_images/l/2/2280.jpg?t=1443637173)
Build Author
KBill
Views
12259
MIY OLY Delta Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Mag arm deltabot with laser cut carriages and connectors.
Longhorn OX (Under Construction and In Progress)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.
![V-Slot™ X -Y Stage Hidden Acme Rod Example](https://openbuilds.com/data/article_images/l/0/66.jpg?t=1389473440)
Build Author
Mark Carew
Views
51450
V-Slot™ X -Y Stage Hidden Acme Rod Example
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
![OPENBUILDS Korea (ROVO 1000)](https://openbuilds.com/data/article_images/l/1/1743.jpg?t=1423322516)
Build Author
inhan
Views
11744
OPENBUILDS Korea (ROVO 1000)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I am very grateful to Mark Carew with passion and imagination. Therefore, the machine is good, but making the website there too daedanhaeseo The end of the same either way to invisible homework. Thank you for allowing openbuilds team submitted to the challenge once again for those with a passion that I feel like in Korea, I want to be a great help.
![YAOR (Yet Another Openbuilds Router)](https://openbuilds.com/data/article_images/l/0/825.jpg?t=1401483549)
Build Author
winand
Views
16903
YAOR (Yet Another Openbuilds Router)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Openbuilds Router, my version :-)
Guitar shop CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Great bit of kit time will tell if it is up to the job
Custom OX Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inspired by the original OX by Mark Carew, this is my Custom OX. Many small changes, additions, and upgrades. Build is in progress and this post will be updated regularly with photos. Enjoy!
![Micro Ox 2 x 2](https://openbuilds.com/data/article_images/l/1/1903.jpg?t=1426442709)
Build Author
Hytech2k
Views
6023
Micro Ox 2 x 2
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Micro Ox Build
![OXENlarged](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Zootalaws
Views
5762
OXENlarged
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a 1500 x 1500 Ox build
Yet Another Ox Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This build log will chronicle the construction of my oversize (1000mm X 1500mm) OX router.
![My JGro CNC becomes an OpenBuild Project](https://openbuilds.com/data/article_images/l/1/1567.jpg?t=1420332689)
Build Author
Joey Selzler
Views
12025
My JGro CNC becomes an OpenBuild Project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the story of my progression from the JGRO cnc router design to using the OpenBuild system. In the process I think I have learned some things about cnc routers and the accuracy required to make a good build.
![Angus : A Slightly](https://openbuilds.com/data/article_images/l/1/1305.jpg?t=1415256336)
Build Author
Nugz
Views
12511
Angus : A Slightly "Beefier" OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.
![Remix of Sage's Delta-Six](https://openbuilds.com/data/article_cat_images/l/0/272.jpg?t=0)
Build Author
Robert J Rissell
Views
4116
Remix of Sage's Delta-Six
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I'm looking to build a large build-volume, accurate, steady 3D printer with the eventual aim of swapping in a diode laser to allow for use as a cutter for printing/cutting parts out of balsa sheet for building model aircraft.
![RoboFoamCutter](https://openbuilds.com/data/article_images/l/0/505.jpg?t=1391725995)
Build Author
Colin Russon
Views
7766
RoboFoamCutter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Lead screw based Foam Cutter that can easily be adapted to full belt / pinion drive and to CNC.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)