Other Style CNC Mills
Build Author Gooshpoo Views 7087
Gooshpoo's H style cnc machine
A cool project about my cnc machines unique style.
Build Author Mark Carew Views 67694
Phlatprinter foam cutting CNC machines are awesome space saving mills that use a rotary axis as a sheet feed.
Build Author cureac Views 16435
CNC Rotary Table Rotational Axis, A Axis B Axis 4th 5th Axis CNC Dividing Head
This is my first major project.
Build Author Rakmup Views 38029
CNC Router Lathe
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.
Build Author Mark Carew Views 12859
Phlatprinter MKII Foam Cutting Machine
Build Author theracermark Views 1783
Reviving the Origonal PhlatPrinter with BlackBox
Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area
Build Author Vunnie Views 4957
Workbee CNC on steroids
My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it
Build Author HC.Carbo Views 4360
C_Beam Hammerhead 5x
setup for learning 5x
Build Author JimB828 Views 6535
A horizontal-router CNC using openbuilds parts geared toward routing out mortise and tenon joinery; or any other end grain work on wood.
Build Author Mark Carew Views 29752
PhlatPrinter MK 3
The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.
Build Author Richard Long Views 13601
Solid basics CNC router
This build focuses on the basics to provide a good foundation to further enhance the ability to achieve tight tolerances
Build Author John J Talavera Views 16441
CNC FOR EVERYONE!
This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.
Build Author Ronald van Arkel Views 14445
Upgrading the C-Beam machine
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Build Author Mohammad Kokash Views 8169
CNC 1000x1000mm C-beam
inspired by http://openbuilds.org/builds/c-beam-sphinx.3605/
Build Author Mavricks710 Views 1629
CNC Router Machine
CNC Router with working area 550*550*200
Build Author I-P-Daily Views 513
CNC built, work in progress, fail
2x4 cutting area, enclosed with dust collection mainly built out of wood.
Build Author Lloydsch47 Views 1108
Double C-beam Y axis 500mm., Double 2080 X axis 600mm. , C-beam Z axis 250mm, TB-6600 drivers, MKS-DLC32v2 GRBL w/wi-fi and blue tooth
Build Author Dina Jacobson Views 1380
Gauss Probe Machine
Standard build with high Z using a Gauss probe instead of a router.
Build Author John J Talavera Views 10091
CNC FOR EVERYONE TITAN CNC ROUTER
www.cncforeveryone.com TITAN CNC ROUTER is the perfect PCB milling machine or for smaller projects. Don't be fooled by its small size it is capable of routing with the big boys...!
Build Author AWoodbridge Views 2167
Pro Light 1000 CNC Machining Center Rebuild
Replacing the Pro Light control box with a Open Builds BlackBox.
Build Author Elaina c Views 742
This is a build for those of us that want to work fairly large but are in a tight space and budget
Build Author Nomad1 Views 2546
CNC China Router Conversion to Open Builds System
China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“
Build Author RobertCanthal Views 3630
My C-Beam machine...from 500 to 1000mm base
C-Beam machine - 1000mm base.
Build Author RobertCanthal Views 4072
My C-Beam machine...
A C-Beam machine design, strengthened with extra brackets and plates. GRBL controlled, opto-isolated inputs, jogging box.
Build Author PickyCNC Views 1611
Building a Phlat based CNC for MDF processing. Capacity of 48" x unlimited length.
Build Author CubeSpawn Views 13847
CubeSpawn 3 Axis Mill Module
Small Form factor based 3 axis Gantry style mill, Removeable mechanical module. Removable Electronics. with a removable machine pallet, for automation.
Build Author dominichartman Views 1050
cnc vreesbank 2500x30000
This cnc milling machine is 3 meters by 30 meters,
Build Author andy-may Views 5568
My First CNC Machine
This will be a step by step record charting my successes and failures in my voyage of discovery while building a CNC router. Please excuse my English-English which may lose something in translation to American-English. I would be grateful for any advice during the build
Build Author Joe D Views 4112
Reworked Routkit SD
I could not "tram" the spindle to the table. I found that the V Rails could not accurately be adjusted so the Gantry was equal distance from the spoilboard in multiple places.
Build Author Michael LaBombard Views 2219
My Workbee build
Workbee, 1000mmX750mm , from China
Build Author Mallemann Views 2762
Generic 6 Axis Controller
Generic 6 Axis (Stepper) Controller
Build Author Richard Bugland Views 7564
Heavy Inexpensive CNC
Acquiring a CNC has been on my list for some time now. This concept is a bare bones, upgradeable machine that will not require a complete rebuild when new parts become available. With a cutting surface over 36" square, this beast should be capable of creating its own parts. Lowering the price to make upgrading and making this contraption beefier, faster, and more precise.
Build Author SvenderMeister Views 5759
This is a cnc router with 3 axis and a kress 1050 motor. Its 140x120cm and a homebuild with your help!
Build Author Colin Tree Views 5502
The first criteria was portability, the second was cutting out a sheet of ply, the third was the ability to shape a foam surfboard blank, but the main criteria was a small budget.
Build Author openhardwarecoza Views 3552
20x60 to Dewalt 611 Mount (a.k.a the Rook)
Dewalt 611 Router mount for mounting onto 20x60 v-slot
Build Author Elijah Anderson Views 8138
The Budget Build
An affordable large CNC machine, that so far has been easy to assemble
Build Author FancyKiddo Views 6762
Triangular CNC Milling Machine
A wonky build to eliminate slop on a long Z axis