Select a Category
Build Author Hytech2k Views 73371
Area 51 CNC Parts F-117 CNC Gear Rack Drive System
This is my journey on building a rack and pinion Ox variant called the F-117 CNC.
Build Author CubeSpawn Views 15129
CubeSpawn Ultimaker 3D Printer Module
This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker
Build Author John J Talavera Views 14355
CNC FOR EVERYONE!
This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.
Build Author SlyClockWerkz Views 13497
1000mm X 1500mm OX CNC -- Fiber/Garolite
Building the full size OX.
Build Author Ulnad Views 12047
Delta Bot: Improved DIY 3D Printer
Build the efficient and reliable all metal structure 3D Printer. Improved significantly with new concepts for printers. Great quality and up to 400 mm/s print speed (very fast). Built with heated bed, hybrid bowden suspended extruder, and counterweight (tested printing 21 hours straight with no motors hot). Optional smart controller for computerless printing. Print any kind of thermoplastic.
Build Author CubeSpawn Views 12000
CubeSpawn 3 Axis Mill Module
Small Form factor based 3 axis Gantry style mill, Removeable mechanical module. Removable Electronics. with a removable machine pallet, for automation.
Build Author Keith Davis Views 11805
OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.
Build Author andrew Adsit Views 10365
OX Cable Management, Electronics Case, E-Stops
750mm x 750mm OX build, xPro V2 controller, 400W Spindle with PWM controller.
Build Author Jim S Views 9120
C-Beam based modular Resin Printer
The build is based on a 500mm C-Beam and the SeeMeCNC FlexVat. The C-Beam is both the linear motion and a structural element of the design. The frame that holds the 45 degree first surface mirror and the build vat can slide up and down the C-Beam to accommodate projectors with lenses at different elevations.
Build Author mirage335 Views 9094
Multi-tool 3D printer, laser cutter, and CNC mill.
Build Author Beam Views 5055
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author Eric Jacobsson Views 3860
The Floating Dust Shoe
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
Build Author Fabio Bertuzz Views 2634
Fascinated for some time by 3D Printing. Now, after studying countless forum posts, blogs and similiar stuff, i want to Start with my own build. Maybe a bit much but usually i thrive with the challenge.
Build Author wojak Views 2101
W|W plasma/drag knife 1500x1500 (floating head & z-axis)
Step by step designing and implementing of my plasma approach
Build Author mytechno3d Views 1884
Z FLoating head for Plasma cutting (OX CNC compatible)
How to convert your OX CNC to a plasma cutter at low cost
Build Author Vegard Humlen Views 1485
CNC Coating Machine
The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.
Build Author James Evanko Views 1001
Sherline C-Beam with Offline Controller and MPG
This is a C-Beam based router with V-rails used for the bed, a Sherline spindle with Jacobs chuck, closed loop stepper motors on every axis and an offline 4-axis CNC controller. A U-channel was created to guide the drag chain on the X-axis.