Welcome to Our Community

Some features disabled for guests. Register Today.

CUT SMITH

Mar 9, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.

Rob's C-Beam Machine XLarge

Feb 28, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.

Vox Solid State

Mar 15, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).

RiNo Route

Jan 5, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated

CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)

Mar 5, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.

Workbee "style" 1010 cnc

Feb 12, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.

Clear Acrylic Dust Shoe

Mar 17, 2019
Category
Everything Else
Build Progress
Build Complete!

Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.

Screen Mesh Stretching

Nov 10, 2017
Category
Everything Else
Build Progress
Build in Progress...

The intention of this project is so that the mesh is on the well stretched frame, and thus there is a better production of frames.

CNC design (parts named)

Nov 14, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This design is previously posted in this area. I downloaded the file in order to customize as I needed. I found that the parts were not identified. I went through the design in an attempt to name the parts and identify them by location.

Quack Ball

Mar 5, 2018
Category
Camera Sliders - Rigs
Build Progress
Build Complete!

Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice