Select a Category
Build Author Ryan155 Views 5946
I made a mill from first principles because I didn't like any of the ones that were out there, More info can be found on the website RigCNC.com
Build Author Matthew Bates Views 3529
CNC Router Overhaul
This will be a complete overhaul of this router with some cool modifications.
Build Author Sam Dobbie Views 6338
A fully aluminium printer made from off the shelf components, no printed parts.
Build Author M1dn1ghtN1nj4 Views 6928
This is a heavily modified system based on the RatRig V-Cast. Lots of personal touches, and a LOT more to come!
Build Author SOA Views 54994
GridBot Two: Powerfully Simple
Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints. 300 x 300 x any build volume. Just change out the Z lead screws, rods, and four pillars. Total BOM around $700 USD. Build time around 6 hours.
Build Author Cosmosteel Views 3318
Clear Acrylic Dust Shoe
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Build Author mytechno3d Views 3844
Crypto Mining rigs with vslot rail
Build Author pek Views 23074
Prusa i3 Bear Half Upgrade v1.0
Stronger frame for Prusa i3 MK2 / MK2s / MK2.5 3D printer
Build Author James Archer Views 11353
Archer - An extendable all metal 3D printer
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
Build Author MechEng Views 13781
Generic Rigid 3D Printer (Currently on 1st Revision!)
Rigid 3d printer with more than enough room for dual extruders. Easily expandable platform.
Build Author SecretSpy711 Views 18694
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
Build Author RJ_Make Views 4093
Fully Open Source Motorized Camera Slider Build Overview (OpenSlider)
This is a video were take a high level look at how I built up my version of a fully open source Motorized Camera Slider (OpenSlider)
Build Author Rat Rig Views 26856
Rat Rig V-Core 3D Printer ( Core XY )
Fully OpenBuilds based Core XY printer design by Rat Rig. CAD files, build manual, build videos available!
Build Author Ed Chung Views 6125
Rigidbot Big with glass bed
Started with a Rigidbot Big Added a single flat glass bed Used a Smoothieboard clone driving DRV8825
Build Author 3D Meister Views 3633
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author JP Warnke Views 10831
Warnke CNC Router
A blend of modular aluminum and steel bracketry built to yield fine cuts in hardwood and aluminum. An open table with a shiftable pin-fixture concept will allow the operator to shift longer than Y-travel work-pieces, such as doors, along the Y-axis of the table. This machine has a 44" (X) by 24" (Y) by 8" (Z) travel with water cooled VFD spindle motor, t-slot ext work table, cable carriers, side guards n dual y drives. Total weight (w/base-stand) is about 600lbs.