Select a Category
Build Author Ahmed Ibrahim Views 2873
Cairo Mini 3d-Printer
We are introducing the Cairo Mini 3d-printer! It’s a DIY fully Open-source Reproducible 20x20cm 3d-printer. The original goal of the Cairo Mini 3d-printer is to create a low-cost 3d-printer below 220$(3500 LE). That anyone can build with ease.
Build Author Lasersc Views 2767
The D & R TigerPaw Trilogy
Hopefully this will be a quick guide to one way that you can add a laser to an existing CNC router.
Approximately 910mm x 955mm x 82mm. There is 250mm available in the Z, but the gantry is only 82mm from the bed surface.
Build Author Crazzy French Dude Views 2664
PeeNaPle_V1.4b is a BoB controller board for 3D Printers, CnC and cartesian machine, using the latest Teensy_4.1
32 Button Hand Pendant for the PlanetCNC Control Board
This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.
Build Author Nomad1 Views 2597
CNC China Router Conversion to Open Builds System
China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“
Build Author cbc Views 2539
Fully 3D Printed Small CNC Router/Plotter
3D Printed CNC machine. The build is on Thingiverse. https://www.thingiverse.com/thing:3842401 I posted it here to give props to the Openbuilds Control Software!
Clock repair stand
Open source clock movement stand
Build Author that-jim Views 2460
Z-Axis Upgrade For My Sphinx
Z-Axis Upgrade For My Sphinx
Build Author Keith Davis Views 2419
A 200mm x 300mm x 200mm workhorse that never needs leveling due to Posi-Drive Leveling design.
Build Author OpenBuilds Views 2413
Interface magnetic mount
A simple build that helps you to mount the OpenBuilds Interface to the front of your machine.
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
Build Author tarekhassan2030 Views 2251
Home build from A to Z
I made this from A to Z at home by myself with reading and watching tones of videos. 50 cm X 50 cm but I get 40cm x 35 cm as a real workread
Build Author Calotype Views 2238
My DIY panoramic rolling (&banding) Machine.
DO WHAT YOU IMAGINE !
Build Author Linkreincarnate Views 2155
I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,
Build Author joe williams Views 2151
HandCrafted WorkBee - HCWB
This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.
Build Author theracermark Views 1927
Reviving the Origonal PhlatPrinter with BlackBox
Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area
Build Author David Hartkop Views 1789
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
Build Author Ted Moyer Views 1718
LEAD 1515 HIGH Z MOD 4KW ER20 7.5 KW VFD
OLD Lead 1010 High Z Mod converted to Newest Lead 1515 with High Z mod, slimmer cbeam motor mounts, thrust bearings etc. Extended by original table out and upgraded my 1.5kw VFD and Spindle to 4kw ER20 Spindle and 7.5kw GT VFD
Build Author ckgottabuild Views 1679
Lead CNC 1010 Platform and Rotating Laptop Mount
Moveable Lead CNC1010 build with handles on four corners. Everything fits on one sheet of cut out 4x8 plywood
Build Author mjenkins5720 Views 1618
Modified LEAD machine
At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.
Build Author Michael Rude Views 1408
C-Beam Machine XL
C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.
Build Author Neil Scott Views 1300
This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.
OpenPull From CNC Kitchen.. attempt
This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.