Circuit - Software Project
-
Circuit - Software Project
Laser Engraver Control Board + Inkscape extension
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a PCB designed to control a laser Engraver CNC
Software speed control of a brushless dc (Bldc) motor from Mach3.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.
![CNC xPRO V4](https://openbuilds.com/data/article_images/l/8/8031.jpg?t=1544588533)
Build Author
Spark Concepts
Views
13534
CNC xPRO V4
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Take your build to the next level with the CNC xPRO V4!
![CNC xPRO Driver](https://openbuilds.com/data/article_images/l/0/643.jpg?t=1479952413)
Build Author
Spark Concepts
Views
71748
CNC xPRO Driver
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
Controlbox for a CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.
![BlackBox Motion Control System](https://openbuilds.com/data/article_images/l/8/8320.jpg?t=1568566381)
Build Author
Mark Carew
Views
74651
BlackBox Motion Control System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
![MPG Jog Controller for CNC xPRO](https://openbuilds.com/data/article_images/l/8/8235.jpg?t=1549135510)
Build Author
Spark Concepts
Views
4376
MPG Jog Controller for CNC xPRO
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Been playing around with an MPG Jogwheel
![INTERFACE CNC Touch Control System](https://openbuilds.com/data/article_images/l/9/9688.jpg?t=1608057066)
Build Author
OpenBuilds
Views
23157
INTERFACE CNC Touch Control System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Super cool standalone Human-Machine Interface for controlling your CNC machines!
DIY anodizing power supply
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
How to make your own anodizing power supply on a budget
Tweakie's De-Mag.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A little project for a rainy day which some, like me, may find useful.
![Optical Limit + Home Switches](https://openbuilds.com/data/article_images/l/0/512.jpg?t=1391894204)
Build Author
The Dude
Views
19218
Optical Limit + Home Switches
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Optical home and limit switches for cnc, 3D printers, laser cutters, etc.
![OpenBuilds PowerCase](https://openbuilds.com/data/article_images/l/7/7836.jpg?t=1542228986)
Build Author
Mark Carew
Views
6635
OpenBuilds PowerCase
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple to assemble, super clean and safe PSU case solution that fits into the OpenBuilds wire management ecosystem
SMD Pick and place machine - Smoothieboard/OpenPnp
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp.
![M Cubed 3 Axis Bluetooth CNC Controller](https://openbuilds.com/data/article_images/l/1/1648.jpg?t=1423954156)
Build Author
M^3
Views
16485
M Cubed 3 Axis Bluetooth CNC Controller
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Low cost, Bluetooth enabled, 3 axis CNC controller. GRBL 0.9 compatible.
Controll Board for CNC Projects
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Echinus Team change the Firmware from "Teacup" to "Marlin". I use this board in my 3D Printer and it works very good! So I write a short report.
Modular Controller PCBs
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a build still in the prototype stage. The initial design is being used to control a 4 axis sample change, but the PCBs when finalized will be able to be adapted as a convenient way to wire stepper (or eventually hybrid stepper) drivers to which ever controller you happen to be using. Current developments center around an Arduino Mega, although more interfaces are planned in the future. The main design centers around the use of Phoenix Connectors.
Stinger-Panting Images in the Air
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Stinger displays images in the air by using a single column of LEDs. Special computer code converts graphics to pixels; then, the pixels are send to the strings of LEDs, which with the help of of the motor's fast movement the most colorful are displayed on thin air.
![BlackBox X32](https://openbuilds.com/data/article_images/l/10/10381.jpg?t=1669208741)
Build Author
OpenBuilds
Views
18898
BlackBox X32
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The next level of CNC motion control solutions. Packed with advanced new features and built on the reliability of the proven BlackBox system
![OpenCase Mounting Kit](https://openbuilds.com/data/article_images/l/7/7820.jpg?t=1542035748)
Build Author
Mark Carew
Views
5111
OpenCase Mounting Kit
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The OpenCase Mounting Kit makes wire management quick and easy!
![PiDuinoCNC Controller](https://openbuilds.com/data/article_images/l/3/3091.jpg?t=1456136696)
Build Author
David Arroyo
Views
13564
PiDuinoCNC Controller
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.
PS2 Keyboard And SD Card G code sender For GRBL
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Now test ready
32 Button Hand Pendant for the PlanetCNC Control Board
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.
![snc98_Slash-Number-Calculator](https://openbuilds.com/data/article_images/l/5/5117.jpg?t=1495901212)
Build Author
Jens Grabner
Views
3463
snc98_Slash-Number-Calculator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This calculator work inside with a spezail count format - Fraction as Mantisse + Dezimal exponent .. in summ 9 Byte.
HIGH POWER DC MOSFET (Relay)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
High Power DC MOSFET
USB Pendant
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An USB Pendant for LinuxCNC / Mach3
![PeeNaPle_V1.4b](https://openbuilds.com/data/article_images/l/9/9470.jpg?t=1597368590)
Build Author
Crazzy French Dude
Views
3814
PeeNaPle_V1.4b
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
PeeNaPle_V1.4b is a BoB controller board for 3D Printers, CnC and cartesian machine, using the latest Teensy_4.1
![Interface magnetic mount](https://openbuilds.com/data/article_images/l/9/9686.jpg?t=1608053457)
Build Author
OpenBuilds
Views
3444
Interface magnetic mount
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple build that helps you to mount the OpenBuilds Interface to the front of your machine.
AVR SMD Daughter Board
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
SMD AVR Solderless Daughter Board
M10CUBE PICO CNC. A Universal Controller
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An attempt is to be a Unified Modular Controller based on M10CUBE platform. For GRBLHAL and MARLINHAL applications. HAL porting is under way 1 - WIZnet Pico Clone W5100S-EVB-Pico 2 v- 6 X StepStick. Not sure about the sixth driver, (Pico pins limitation) . External connectors for larger drivers 3 - Opto - isolated spindle PWM. 4 - HMI 5 - I/O on diferent modules and Ethernet 10MBPS communication. Patches will be written to GRBLHAL for Ethernet I/Os (Interrupted).
KinectSkin
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
For all other builders and robotic technies!
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)