Select a Category
Build Author Keith Davis Views 30377
A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid, inexpensive printer that will reliably print any type filament for thousands of hours while you sleep, fish, or play ball in the park.
Build Author Rat Rig Views 26856
Rat Rig V-Core 3D Printer ( Core XY )
Fully OpenBuilds based Core XY printer design by Rat Rig. CAD files, build manual, build videos available!
Build Author Slewratesarego Views 16268
The RAT. A form ply and aluminium hybrid.
A hybrid of form ply and aluminium. 835x1260x100mm working envelope.
Build Author Jesse Jenkins Views 8465
Hedron's build with Ooznest kit and Xylotex motors
A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.
Build Author M1dn1ghtN1nj4 Views 6928
This is a heavily modified system based on the RatRig V-Cast. Lots of personal touches, and a LOT more to come!
Build Author Ridgeback Views 9449
Apple Crate CNC
Low cost, apple crate framed CNC.
Build Author rob4cnc Views 2808
Rock n Roll
The Rock n Roll is built on granite, is solid as a rock, and gathers no moss. This build provides a high degree of accuracy and repeatability. Built to be strong, use redundancy, and use long lever arms to average out imperfections in the equipment. Built to go fast and light. We will use a high speed spindle, large high voltage stepper motors and small cutting heads to overwhelm the forces produced at the cutting head.
Build Author Genetoys Views 1907
Building a printer that can fit inside and operate at ~200 C oven temperatures
Build Author ckgottabuild Views 2048
Lead CNC 1010 Platform and Rotating Laptop Mount
Moveable Lead CNC1010 build with handles on four corners. Everything fits on one sheet of cut out 4x8 plywood
Build Author Jones Views 2559
The Domino - 1.5m x 1m
DIY scratch build consisting of gas pipe, skate bearings, 12mm birch, 3/4 maple v-core ply, Nema 23's, and arduino and CNC shield with DRV8825's.
Build Author Terone Burgenheim Views 5067
CoreXY - Tower Printer
I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.
Build Author 3D Meister Views 3633
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author bpatterson42 Views 1999
Inverted Y C-Beam Machine
Similar to C-Beam Machine build, but with inverted Y-axis assembly to shield drive screw. Integrated XZ gantry can be fixed to any solid surface. Build dimensions are 36" x 36" x 6".
Build Author Robert Huxford Views 2637
High Intensity Dive Light
Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.
Build Author crispin Views 1267
Hi my name is crispin and I'm an aluminum addict.
Build Author Julius Views 7125
The "Hand" CNC (or OXCarve)
more to come, please follow along the journey!
Build Author Andy Braham Views 7203
This 3D Printer is made to provide the most accurate results with the least amount of investment. This Printer is being designed to allow the common user to own a very accurate piece of machinery.
Build Author Pol Feliu Views 7406
Batxillerat Research Project: Design and construction of a CNC
I'm working on a cartesian cnc router for my school research project