Build List
-
Active Filters:
new
My build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I am satisfied with my build and next one will be even better.
![777 CNC Build](https://openbuilds.com/data/article_images/l/5/5922.jpg?t=1511205855)
Build Author
patdee
Views
3990
777 CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
To begin the "Build" I have ordered a few parts from OpenBuilds to get started. They are arriving today; according to "tracking". I cant wait! Praise Jesus! This 85 yr old man is getting a "New " life. Hallelujah and amen. Because I am building this on an existing machine, I have to be careful; so I will order some parts then see what I don't need (such as a base); along with parts that I may need to adapt it to the machine. It should be fun! "Caint wait!"
![The FEEDBACK FRACTAL Build](https://openbuilds.com/data/article_images/l/8/8518.jpg?t=1557431974)
Build Author
Cortellini
Views
3328
The FEEDBACK FRACTAL Build
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.
![FRANKINATOR -- My CNC Router Built Around The C-Beam Rail](https://openbuilds.com/data/article_images/l/2/2370.jpg?t=1454334800)
Build Author
Robert Bailey
Views
28210
FRANKINATOR -- My CNC Router Built Around The C-Beam Rail
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a TinyG to run it. where I work I have Hardware, Software and Mechanical engineers and they all got sucked into my project. they want one to do prototyping at the office, once they see mine...
Brokkr CNC 2.0
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1M C-beam xy variant
![WorkBee 1010](https://openbuilds.com/data/article_images/l/9/9237.jpg?t=1583420438)
Build Author
txcomp
Views
5829
WorkBee 1010 "Get Rid of the Slop" Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My goals for this build were to eliminate slop and flex while also allowing easy serviceability.
![the STD](https://openbuilds.com/data/article_images/l/2/2800.jpg?t=1446020246)
Build Author
Sam Dobbie
Views
6755
the STD
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A fully aluminium printer made from off the shelf components, no printed parts.
My first CNC - The C-Beam Basic
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I am a newbie and this is my first build. After hours and hours of research I decided on the C-Beam. I will be changing one or two things but I will basically be building this as per Mark's video.
![bOX](https://openbuilds.com/data/article_images/l/0/965.jpg?t=1424020904)
Build Author
Pendragon
Views
9610
bOX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A bigger OX. As this build is nothing new I will detail my build process, I am not an experienced builder, this will maybe help someone else. The size of the bOX will be 100cmx75cm. I will use aluminium plates, a tinyG, and most probably only open source / free software.
![OXBear](https://openbuilds.com/data/article_images/l/1/1056.jpg?t=1441332255)
Build Author
Bear
Views
10009
OXBear
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
ANOTHER OX!~ Huge Thanks to Marc Carew and Open Builds. The primary reason I am building this CNC mill is to aid in my homemade snowboard creation. I am going to try and document as much of everything as I can and post it here to help others going a similar route. I know from past projects that taking the time to document each step can be tedious when you want to charge ahead but I will try! I hoping to get feedback on my design choices and set up as I am a complete newbie to CNC.
![CoreXY - Tower Printer](https://openbuilds.com/data/article_images/l/6/6126.jpg?t=1515197272)
Build Author
Terone Burgenheim
Views
5500
CoreXY - Tower Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.
My Ooznest Workbee V2.0 build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm new to this whole process, so this is a build by a newbie for newbies.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)