Select a Category
Build Author Rick Holder Views 13050
Gantry Type CNC with Makita Router
The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.
Build Author dmasters Views 6954
DM C-Beam XXL Tank
1000mm x 1000mm C-Beam XXL CNC with external drivers and high torque Nema 23 motors, 2.2KW Spindle with VFD.
Build Author Jim F Views 8480
Basing this build on the C-Beam machine XL on the parts store, but added a few things to make it more like the C-Beam XXLarge "Tank" by Dollarz81. Going with the Dewalt 611 instead of a water cooled spindle at first. May change down the road. Using a Panucat Gradus M1 controller with BigFoot drivers.
Build Author inhan Views 4763
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.
Build Author andrew Adsit Views 7323
OX 1000mm Y Axis Upgrade
Expands y-axis to 1000mm. 1/2 day build.
Build Author Metalguru Views 4906
Custom black and red Big Ox
Build Author gazingm42 Views 5138
1000mm X 1000mm with tinyg
1000mm X 1000mm overhead cnc machine
Build Author Gerald Klein Views 10676
300mm Diameter, 1 Meter tall, Delta 3d Printer
I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.
Build Author Joe Downard Views 2235
A complete noob stumbling thru his first cnc build in winter.. and trying to find the time with 2 toddlers..
Build Author NeeqOne Views 3364
My first attempt at building a CNC. I chose the Sphinx due to ease of build and extensive documentation provided by Kyo.
Build Author Jay Almers Views 5630
FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router
My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.