Select a Category
Build Author Bmoz Views 13368
Ox with Gecko Controller and CNC Linux
This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux
Build Author Jesse Jenkins Views 7676
Hedron's build with Ooznest kit and Xylotex motors
A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.
Build Author Apothus Views 14569
Sphinx rigid XL
Rigid variant of the C-Beam sphinx platform
Build Author ymilord Views 8262
Kyoujin Mk1 (C-Beam /w Rack & Pinion)
C-Beam based CNC with Rack & Pinion (for the X Axis) and lead screws (for the Y Axis)
Build Author lewac Views 6496
PnP 4 axis small/fast machine
You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.
Build Author David the swarfer Views 14234
The Nguni - an OX variant
A modified OX with more X clearance, MDF plates, vacuum table
Build Author LarsTveito Views 6330
Ox Stainless with ballscrews
Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.
Build Author bpatterson42 Views 1178
Inverted Y C-Beam Machine
Similar to C-Beam Machine build, but with inverted Y-axis assembly to shield drive screw. Integrated XZ gantry can be fixed to any solid surface. Build dimensions are 36" x 36" x 6".