Build List
-
Active Filters:
cnc
OX, of the house Steel
OOZNEST Style OX machine with 3D printed panels
Build Author Brandon Satterfield Views 6314
SMW3D OX
The SMW3D OX, original other than a lot of learning!
Build Author Hussein Dermay Views 5237
Ooznest WorkBee 1000mm x 1000mm Screw Driven
I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.
Build Author Kevr102 Views 4464
Ooznest Ox CNC 1000 x 750
A few mods on my Ooznest supplied Ox cnc Encountered a few minor issues along the way but now all sorted.
WorkBee 750x750 build
This CNC build is to help with some areas of my guitar builds - mainly inlays but some body work as well where appropriate. I expect it will be used for lots of other things once I get to know what it's capable of (sorry - what I'm capable of!).
Repurposed Steel Table 4 x 8 Build
Repurposed Steel Table for CNC Router Build.
C-Beam Machine XL
C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.
Workbee 1000x1000 mm screw driven Full Kit From Ooznest
A short summary of my Workbee CNC Build. I try to update it where I can
Build Author pedrofernandez Views 6527
ACRO 20x20
The Acro Laser Machine Build
Desktop CNC
Approximately 910mm x 955mm x 82mm. There is 250mm available in the Z, but the gantry is only 82mm from the bed surface.
C-Beam Machine - MyFirstCNC
This is my first foray into CNC machines, after much review I decided on the C-Beam machine as it seemed easy to work with and will enabled me to build more and larger machines as I gain knowledge. I am planning on building the machine largely unmodified from the reference design. I will be building the machine an axis at a time as I need to spread out costs over time.
Something a Tad different
Future CNC router kit design
Build Author Limine3D Views 3295
Shapeoko 1 upgrades
Replaced the original Z-axis for a shapeoko with a c-beam upgrade. This upgrade required a nema 17 mount and a quiet spindle mount I printed with a 3D printer.
Homemade CNC
This started as an attempt to learn to weld and quickly took on a life of its own.
Build Author Andre Cooke Views 14812
CNC Greenland Paddle Carver build
CNC mill for carving / milling Greenland Paddles
Build Author Gooshpoo Views 7813
Gooshpoo's H style cnc machine
A cool project about my cnc machines unique style.
Build Author Janis93 Views 13581
1000x1000 Two version of router Belt and Screw
Cheap sheet metal gantry solutions, for diy belt driven cnc and screw driven cnc.
Generic 6 Axis Controller
Generic 6 Axis (Stepper) Controller
EOX
Open builds style wood CNC router. Usable work aria 1000mm x 1250mm x 150MM (X x Y x Z). 80x40 C bleam for the Y axis , two 60x20 beams for X axis and a 60x20 fo Z. Interlocking GT3 belts for X and Y. Looking to change over to a rack and pinion system in the future. 8x8Tr Lead screw for the Z. Leadshine HBS507 close loop drivers and 3-phase servo motor 573HBM20-EC-1000 motors driving the Y and X axis. Would recommend them to anyone looking for servo like performance at a affordable price.
Hybrid shapeoko Xcarve cnc router
My scratch build using shapeoko, xcarve, and custom parts.
Build Author Weldsmith Views 6553
CUT SMITH
I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.
Big CNC plasma cutter
more later
Build Author Nicademus Views 7918
CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)
Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.
Build Author Bucky Wootmaster Views 2183
Bucky CNC
CNC machine using extrusions with linear rails and ball screws on all axes - no plates
Build Author Michael.M Views 8268
Sphinx Evolution
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
Phlux Core XY Laser Etcher
A 750mm x 1000mm Core XY Laser Etcher/Cutter. To cut down on cost I tried to have as many parts as possible be printed.
Build Author OffAxis Views 6210
OffAxis CNC 1000x1500
Cut Area: 825 x 1340. Max Cutting depth: 2 inches. Arduino based control with Nema 23 and Nema 17 drive. 8mm leadscrew and 2GT belt drive. 400W 48V quite cut spindle.
Build Author blterry1 Views 16246
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
Build Author JAC_101 Views 4770
Small PCB, Engraving and Delrin CNC Mill
This is my first attempt at building a spindle based CNC machine. The intention is to mill PCB boards and mill delrin blocks. The device was built with an Emergency Stop that actually cuts power to the spindle and motors. This is a post build write-up and consists of finished photo compilation and CAD renderings.
Build Author jz321 Views 3455
OTiS 500mm
OTiS (Off The Shelf) is 500mm cartesian CNC that can be built with all off the shelf parts from OpenBuildsStore. It features C-Beam actuators and a V-Slot frame.
Build Author Sprags Views 1753
C-Beam Kyo Sphinx 10060
More stuff here.
32 Button Hand Pendant for the PlanetCNC Control Board
This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.
Build Author spark2 Views 4300
C-Beam - Sphinx 1000x1000mm inspired by Kyo
A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.
Build Author bpatterson42 Views 2280
Inverted Y C-Beam Machine
Similar to C-Beam Machine build, but with inverted Y-axis assembly to shield drive screw. Integrated XZ gantry can be fixed to any solid surface. Build dimensions are 36" x 36" x 6".
Build Author Denis Lapratte Views 3247
All metal Ox hybrid CNC Router Table
This is my second CNC build, but the first one that I design from the ground up. The base is all metal because I want to add Plasma facility later on. I used the Ox model for the gantry plates and made a few changes to adapt to my design. Since I wanted to use parts from my first CNC to save as much as possible, I kept the 5/8 Hi-Lead Screw I had from Roton for the Y and Z axis. I will also add a downdraft table to keep all parts tight on the table for cutting.
Build Author Glenn Weston Views 16570
"The Moagie Mill" My C-Beam XLarge
My Experiences building the C-Beam X Large. Maybe you can pick up a few pointers from my ramblings and experiences if you are considering building this machine.
Build Author Eric Jacobsson Views 12854
The Floating Dust Shoe
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
Build Author Rakmup Views 39290
CNC Router Lathe
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.
Somewhat Simple Lead screw conversion for an OX CNC
Somewhat Simple Lead screw conversion for an OX CNC.
Build Author Dave Pyatt Views 3567
DaveP's Homemade CNC Project
Somewhere along the line sometime around February 2017 I got the bug in my head that I needed to build a CNC router. This is where I am today...
Build Author Carl Siren Views 6152
CNC-machine 650by700
A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.
Build Author Bill325 Views 1528
One more life for a cube
Modify a Gen1 Cube printer into a small cnc router to cut pcbs and light (VERY light) milling work. Also easy to swap out the rotary head and mount a laser head for engraving.
Ox Stainless with ballscrews
Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.
Build Author ShockingTops Views 3419
Opening into doors
Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.
Build Author jtaggard Views 32147
Modular DIY CNC Machine
This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.
Build Author Lindsey Lewis Views 6433
CNC Mini Mill Build
CNC Mini Mill build with some mods after following standard build on Youtube video.
Build Author CandlerCustoms Views 3818
Candler Customs - Custom CNC Machine
Inexpensive Custom CNC Machine or swappable Laser Engraver utilizing OpenBuilds ACRO System
The Nguni - an OX variant
A modified OX with more X clearance, MDF plates, vacuum table
Bedroom Builds (BrB) DIY CNC
So I am employed in the automotive industry and I walk by thousands of dollars of CNC products daily that are no use to me due to being a Technologist and not a machinist. So therefore with some research I found openbuilds and their great selection of products to build my own CNC. This CNC will consist of 4 axis one removable 360 degree axis for turning alongside a x axis table Y axis stationary gantry and a Z axis attracted to the Y axis linear actuator.
Build Author GDanger117 Views 9967
Gantry CNC - Decisions made only to change over and over.
This is my first CNC build. As per the norm, I went in with months of research, planning, and resource gathering tied neatly together with a solid plan. As the path went on, the plan continued to change to accommodate issues I hadn't counted on. But, at the end of the road, the project reached completion, and I learned a ton along the way!
Build Author JWhitten Views 12803
Build #2 - Bigger & Stronger
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
Build Author Apothus Views 20781
Sphinx rigid XL
Rigid variant of the C-Beam sphinx platform
Build Author cory stafford Views 3836
Home built laser cutter
This is a laser cutter built with intent to use arduino as controller for a co2 cutting laser.
Build Author Tucstrlly Views 7460
Stainless OX Kit Build "Diamondback CNC"
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
Build Author Terone Burgenheim Views 1991
My CNC
This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.
Dust Shoe for Kyo's Sphinx
Dust Shoe design for a CNC router. Attaches to Chris Laidlaw's Mount design, with the DeWalt D26200 (which I think is the DWP 611 in the US).
Build Author jamesdjadams Views 11090
C-Beam XL - TinyG - Aluminium Plate - Dewalt 611
C-Beam XL build using TinyG V8.
Build Author Joerharris Views 5659
Joe Harris's all metal CNC Router build
I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!
Vertical Mill
This will be a CNC milling machine. My goal is to make this mill for the minimum cost I can while not sacrificing quality. In hope of staring an educational YouTube channel on CNC milling and 3D Printing. Along with when to use both.
Plastic Monstrosity
Large inexpensive build that can cut a 4x8 ft sheet with room to spare. Can be built using only a 3D printer and standard parts -- no special CNC'd plates required.
CNC design (parts named)
This design is previously posted in this area. I downloaded the file in order to customize as I needed. I found that the parts were not identified. I went through the design in an attempt to name the parts and identify them by location.
Hot Wire 4 Axis CNC Foam cutter
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
Build Author Kyo Views 8415
Plate Maker V-slot Table
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
Build Author Superslinky Views 8502
K40 Laser Build (Major Changes)
Major K40 Laser Mod
my version of xl
A table top version of the open build xl router kit set build. This use of c - beam and xl kit set was coupled with Mach 3 controller running on Dell opti -plex 755 and win 7 pro licence. A Dell opti-plex 755 empty case was used to house the controls and wiring , including the limit switch and emergency stop safety circuits
Build Author Karan Singh Sisodia Views 7591
CNC Laser
CoreXY based CNC Laser machine.
OXilla - a 3ft x 3ft CNC Router/Mill - Goals are strength, power and speed
This will be an ongoing log as I build this machine. Name change by popular demand - at least a couple of us. :)
The Frog: CNC Router
Frog CNC Router. Inspired by OX and "Routy". 24"x36" active working area, approx. 3" usable Z motion.
Build Author Jeremiah Guinn Views 4931
OX CNC SMW3d 1500x1500
A small business idea led us here, lets see where it will go.
Build Author Spark Concepts Views 71452
CNC xPRO Driver
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
Build Author beardyblair Views 24015
Sphinx XL
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
C beam machine (with larger T-slot platform)
Larger, more rigid build plate C beam machine
Linear Rail derivative with ball screw
basic start to design of cnc machine
Build Author Jason Harding Views 3080
Mobile bed cnc machine, first build
Currently i am reworking the frame still with current available parts just going to buy material to make the y and the z axis from openbuilds. The x axis is now going to be mobile similar to a 3d printer style.
Strong? CNC
The goal is to have a relatively strong CNC to be able to cut alu. Working space will be around 800x350x100mm.
C beam Larger and Stronger
My first build based on the original C beam Sphinx. I’m not sure at this point what the final size will be. I have the parts from the c beam Sphinx and extra beams and lead screws to build up to 1000mm x 1000mm.
Build Author Savvas Views 18008
C-Beam Lead Screw CNC Mountain
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
Build Author DaveStewart Views 4987
Small C-Beam Plate Maker With Remote Login & Operation
C-Beam Plate cutter with Raspberry Pi V3, Arduino Mega2560 and Camera. Remote login & operation via SSH with cnc.js server, mjpg server on the Pi.
Robo Morten
A horizontal-router CNC using openbuilds parts geared toward routing out mortise and tenon joinery; or any other end grain work on wood.
Build Author Greg Lampman Views 8053
C-Beam Intro to CNC
Build log for my first CNC machine, a C-Beam Plate Maker
Build Author Huub65 Views 7397
My C Beam - NEMA 17 - GRBL- Arduino project
Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.
Mark 1
My first attempt at building a CNC style machine. Overall my plan is to use the PlanetCNC breakout board and software to run the machine from a dedicated laptop/tablet.
Salmon Sphinx 1.0
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
Another Sphinx - 1000mm x 750mm
The reason for building this CNC is to help me in my guitar building hobby. (telecasters)
OX CNC Router
Ca fait 2 ans que je rêve d'une Fraiseuse CNC. Ni trop grande ni trop petite, sans avoir le budget pour en acheter une toute faite. Je suis artisan menuisier ébéniste et j'ai finalement décidé de la construire. Le projet OX m'a séduit, alors je me lance.
BD's C-Beam Machine CNC Router (WIP)
CNC router table based on OpenBuilds C-Beam Machine bundle.
Build Author islahcnc Views 3771
islahcnc&design
I will post soon some more details.
Build Author JerryD Views 4432
1500x1000mm Adjustable Height
I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.
Inspired by the Crawlbot
Building a couple of CNC's based on the Crawlbot
Build Author Karan Singh Sisodia Views 5218
My Home made CNC
Home Made CNC Router from Scrape
Build Author Sonny Lowe Views 5870
The MakerSL Customized OB Minimill
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
First CNC Build
Building my First CNC for PCB milling. Some modification done to the original build from OpenBuild Bundle.
Arctic_Stingray CNC
This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.
Build Author kallibaba Views 31534
CNC Sand and Spraycalk drawmaschine
A little CNC Sand and Spraycalk drawmaschine More and details in the next weeks
CNC 1000x1000mm C-beam
inspired by http://openbuilds.org/builds/c-beam-sphinx.3605/
Sandy3D wall mounted 1000 mm x 1000 mm C Beam Mill
I am attempting to mount The C-Beam Machine XLarge on the wall and have it look like a piece of art and be totally functional as this will be in our livingroom.
OX CNC Build
OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.
MiniMill - A must have machine :)
The new MiniMill from Mark and Sonny is a great little machine.
The Budget Build
An affordable large CNC machine, that so far has been easy to assemble
60W CNC Laser build
Laser CNC, 60W, didn't have one yet... have to :) This build is a retrofit of a surgical laser into a CNC.