Build List
-
Active Filters:
u
Build Author Savvas Views 13247
Halloumi CNC Machine - Acetal Plates
I built the original machine using plywood plates, and always intended to upgrade those parts to more durable ones. I decided to go with acetal as it's a lot easier to cut than aluminium. I used fusion 360 to model and rebuild the original machine. Once I have assembled everything and feel confident it all works I will release the plate designs here.
Build Author Jones Views 2828
The Domino - 1.5m x 1m
DIY scratch build consisting of gas pipe, skate bearings, 12mm birch, 3/4 maple v-core ply, Nema 23's, and arduino and CNC shield with DRV8825's.
Build Author Luke Cunningham Views 4927
Tronxy X1 extension
Video on youtube: https://www.youtube.com/watch?v=vCTbLZ2_m-w&t=36s
My Little Mashup
A mixed drive, PI Controlled machine
CNC Lathe Upgrade
So, not much here, as I'm still building, but I'm putting in the work.
Build Author Andreas Bockert Views 10417
Sphinx Z-axis upgrade
Upgraded Z-axis for Sphinx-style CNC using ball screws and linear rails.
Build Author mytechno3d Views 12836
Z FLoating head for Plasma cutting (OX CNC compatible)
How to convert your OX CNC to a plasma cutter at low cost
Dragon Plasma cutter
Inspired by MetalGuru's idea : The plasma too cutter . If you have to cut small to medium sheet of steel with a plasma , this build may be for you
Build Author LukasK Views 21369
LS-LASER
I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.
My is just the biggest printer. with a printable area - 1760 x 1146 x 1318h
I myself invented this concept printer form
Build Author Hilleke Views 6428
Acro System cable management and enclosure
wooden parts of the enclosure can be removed easily used the existing extraction of my glass bead burners
Build Author Liam Dahler Views 5384
Affordable Cartesian Printer (Initial Design)
This specific build page is a collection of screenshots sampling some of my initial SolidWorks design and pictures showing physical construction of the initial design. I will be creating individual build articles as I redesign, test, and implement new aspects of the printer.
Build Author Ryan Lock Views 129265
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author stepper Views 3238
Touch screen macro imaging
This is a brief overview of the build of my macro imaging slide.
C-Beam unit with 400W Spindle
Standard (If there is one) C-Beam with plnth
HandCrafted WorkBee - HCWB
This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.
Build Author pedrofernandez Views 10511
Another Sphinx 7550 Made by an Openbuilds Cbeam
feel free to ask anything about this builds, but im a airline pilot and sometimes responding maybe will take me. while!!
Build Author BNMaker Views 9815
+Laser
A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.
Butterfly 3DP V 1.0
tronxy x3 like
Build Author Kyo Views 138332
C-beam Sphinx
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author ChrisViral Views 5719
OP C-Beam Machine XL by ChrisViral
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
Build Author HuguesP Views 8156
YACLR CNC
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
Build Author JerwanDavis Views 4847
Coined by my family as the: Davomatic
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
Build Author jpjoshua Views 10596
Arduino Grbl Laser CNC
Arduino powered Laser CNC using GRBl firmware.
LimpyCNC
Inpired by the OpenBuilds OX and PrintrBot Crawlbot. This is the LimpyCNC. It's still a work-in-progress. But it provides a 120x120cm work space without using up 150x150cm of garage space.
YAPCNC (Yet Another Poor's Man CNC)
Yet Another Poor's Man CNC (YAPCNC) is my first attempt to build a CNC. The idea is for the build to be as inexpensive as posible while being usable for my goals.
Build Author roadss Views 22944
Rawcnc 1.5 Desktop Edition
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
1200X600 SPHINX
Need cnc to make alumunium sign, brass stamp, etc
Build Author Mark Carew Views 80386
V-Slot™ Belt & Pinion Example Build
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Build Author Mark Carew Views 32396
PhlatPrinter MK 3
The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.
Build Author mytechno3d Views 4196
Mining Rig
Crypto Mining rigs with vslot rail
Build Author HPB Views 40163
A simple XY laser engraver/cutter
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
Build Author Michael.M Views 35833
7050 Sphinx
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
DPR-v2 full metal
pictures and mony doku see later
Plasma CNC, 4'6" × 8'8" v0318
A plasma table able to cut 4'6" x 8'8" sheet. Low cost as possible.
Behemoth cnc router with linear rails
Behemoth cnc router build in progress using hiwil rails and closedloop servos.
Solid basics CNC router
This build focuses on the basics to provide a good foundation to further enhance the ability to achieve tight tolerances
Build Author j0achim Views 11003
CoreXY - e3d inspired
CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.
Build Author Keith Davis Views 4429
Torq Xtrdr
Light enough for high speed #3dprinting Strong enough for high speed #3dprinting
Build Author Brandon Satterfield Views 6361
SMW3D OX
The SMW3D OX, original other than a lot of learning!
Build Author Hussein Dermay Views 5301
Ooznest WorkBee 1000mm x 1000mm Screw Driven
I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.
Build Author Kevr102 Views 4523
Ooznest Ox CNC 1000 x 750
A few mods on my Ooznest supplied Ox cnc Encountered a few minor issues along the way but now all sorted.
Rail Builder
glue/staple/eject 1 Axis driven Rail building machine.
WorkBee 750x750 build
This CNC build is to help with some areas of my guitar builds - mainly inlays but some body work as well where appropriate. I expect it will be used for lots of other things once I get to know what it's capable of (sorry - what I'm capable of!).
Repurposed Steel Table 4 x 8 Build
Repurposed Steel Table for CNC Router Build.
C-Beam Machine XL
C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.
Skyggen 3D Printer
GT2 belt-driven Cartesian 3D Printer on an OpenBuilds Extrusion gantry, developed through Autodesk Fusion 360.
Build Author pedrofernandez Views 6582
ACRO 20x20
The Acro Laser Machine Build
Build Author Robert E. Nee Views 14508
Large cartesian gantry style 3D printer
This will be a fixed bed, v-slot implemented X,Y,Z axis gantry style 3D printer.
TrueUp LZ
A version of TrueUp using linear bearings/rods for the Z axis. This required enough modification to make a separate OpenBuilds project to avoid confusion for DIYers.
TrueUp Bold
A beefed up modification of the TrueUp Kit project
Desktop CNC
Approximately 910mm x 955mm x 82mm. There is 250mm available in the Z, but the gantry is only 82mm from the bed surface.
Silverchris's Laser Cutter
Work in Progress of a laser cutter design. Based on the CoreXY build from https://makerstore.com.au
Something a Tad different
Future CNC router kit design
Build Author Limine3D Views 3357
Shapeoko 1 upgrades
Replaced the original Z-axis for a shapeoko with a c-beam upgrade. This upgrade required a nema 17 mount and a quiet spindle mount I printed with a 3D printer.
Build Author John Bolduc Views 4994
SG Duet Delta
This my version of a large no corners cut Delta.
Build Author obmilllivebuild Views 4670
Live C-Beam Build @ MRRF2018
Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.
20x24 inch Fixed Gantry Mill
I have shared many pictures of this project it is now complete I have had my first cuts on this machine and it is solid , still learning the new motion Controller. The Acorn is more like you would find on a commercial built CNC or CNC Lathe.But it does have all of the functionally one needs
Build Author Gooshpoo Views 7890
Gooshpoo's H style cnc machine
A cool project about my cnc machines unique style.
1 Cubic Meter 3D Printer
This is a at home built 1000mm x 1000mm x 1000mm 3d printer. It uses mainly parts from OpenBuild Parts and is very simple to build. The only thing that was custom was the build plate which was designed by myself and tooled at a local machine shop.
Build Author h3rb Views 4316
TEVO Little Monster Direct Mount Extruder
Cheap, experimental Modification to Tevo Little Monster's bowden system for the extruder
Build Author Sword66 Views 9525
The Archon R2
The Archon "In the style of Cartesian movement." A brief overview, guide and summary of my highly experimental build. and some insight into the challenges of building such a large format/belted machine.
Build Author Janis93 Views 13658
1000x1000 Two version of router Belt and Screw
Cheap sheet metal gantry solutions, for diy belt driven cnc and screw driven cnc.
Generic 6 Axis Controller
Generic 6 Axis (Stepper) Controller
Joe's Minimill Build
I put this together to cut aluminum. Chips get everywhere! Cover your lead screws. Put the mill inside an enclosure. DON'T mount electronics (especially the power supply) inside the enclosure, chips will get into it and short it out. Remove the manual jog wheels, they contribute to chatter (something about having a mass on the end of the lead screw causes vibration). I cut at 14000 RPM, 0.05 inch width of cut, 0.05 inch depth of cut, 30 inches per minute and just barely avoid chatter.
Build Author uGen Views 16927
Lab Power Supply + Soldering Station
A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron
Build Author h3rb Views 2654
TEVO Little Monster Marine Vinyl Removable Enclosure
Make a vinyl burrito ENCLOSURE for your TEVO LITTLE MONSTER for < $30 (<$20 if you don't have your vinyl shipped!)
EOX
Open builds style wood CNC router. Usable work aria 1000mm x 1250mm x 150MM (X x Y x Z). 80x40 C bleam for the Y axis , two 60x20 beams for X axis and a 60x20 fo Z. Interlocking GT3 belts for X and Y. Looking to change over to a rack and pinion system in the future. 8x8Tr Lead screw for the Z. Leadshine HBS507 close loop drivers and 3-phase servo motor 573HBM20-EC-1000 motors driving the Y and X axis. Would recommend them to anyone looking for servo like performance at a affordable price.
Build Author Weldsmith Views 6603
CUT SMITH
I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.
Big CNC plasma cutter
more later
5 X 5 Plasma SIMPLE Build
5 X 5 Plasma table...Hypertherm 45 XP....CandCNC....Openbuilds
Build Author hbtousa Views 2280
Quack Ball
Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.
Build Author Nicademus Views 8027
CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)
Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.
Build Author Bucky Wootmaster Views 2199
Bucky CNC
CNC machine using extrusions with linear rails and ball screws on all axes - no plates
Build Author Michael.M Views 8333
Sphinx Evolution
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
Phlux Core XY Laser Etcher
A 750mm x 1000mm Core XY Laser Etcher/Cutter. To cut down on cost I tried to have as many parts as possible be printed.
Build Author joetemus Views 24187
K40 ACRO Conversion
A K40 to ACRO Co2 laser cutter build. Designed and built to expand the work area of the K40
Build Author BinaryConstruct Views 8952
BinaryConstruct V3
This printer is a design that has evolved over three years. The original goals of this project were to design a rigid printer that had a large print volume, 300mm^3, with easily sources parts and a minimum of complicated printed parts.
Build Author OffAxis Views 6298
OffAxis CNC 1000x1500
Cut Area: 825 x 1340. Max Cutting depth: 2 inches. Arduino based control with Nema 23 and Nema 17 drive. 8mm leadscrew and 2GT belt drive. 400W 48V quite cut spindle.
Build Author Calotype Views 2558
My DIY panoramic rolling (&banding) Machine.
DO WHAT YOU IMAGINE !
Build Author Rob Mahan Views 11495
Rob's C-Beam Machine XLarge
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
Build Author blterry1 Views 16362
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
Build Author JAC_101 Views 4821
Small PCB, Engraving and Delrin CNC Mill
This is my first attempt at building a spindle based CNC machine. The intention is to mill PCB boards and mill delrin blocks. The device was built with an Emergency Stop that actually cuts power to the spindle and motors. This is a post build write-up and consists of finished photo compilation and CAD renderings.
Build Author jz321 Views 3517
OTiS 500mm
OTiS (Off The Shelf) is 500mm cartesian CNC that can be built with all off the shelf parts from OpenBuildsStore. It features C-Beam actuators and a V-Slot frame.
Build Author spark2 Views 4338
C-Beam - Sphinx 1000x1000mm inspired by Kyo
A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.
Build Author Naomi Wu Views 8951
Naomi Wu's Automatic Bartender- BarBot!
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
Build Author bpatterson42 Views 2348
Inverted Y C-Beam Machine
Similar to C-Beam Machine build, but with inverted Y-axis assembly to shield drive screw. Integrated XZ gantry can be fixed to any solid surface. Build dimensions are 36" x 36" x 6".
Build Author Denis Lapratte Views 3285
All metal Ox hybrid CNC Router Table
This is my second CNC build, but the first one that I design from the ground up. The base is all metal because I want to add Plasma facility later on. I used the Ox model for the gantry plates and made a few changes to adapt to my design. Since I wanted to use parts from my first CNC to save as much as possible, I kept the 5/8 Hi-Lead Screw I had from Roton for the Y and Z axis. I will also add a downdraft table to keep all parts tight on the table for cutting.
Build Author Daniel.korneliussen Views 2579
Reprap prusa mendel i2 Frankenstein 2018 build
Mad plumbers choice what Else can i say?
Build Author Camvec Views 5322
WorkBee CNC full kit 1500mm x 1500mm
This will be my first build ever! Looking forward to it , just gotta finish the new workshop first then I'm on it!
Build Author Eric Jacobsson Views 12970
The Floating Dust Shoe
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
Build Author Rakmup Views 39411
CNC Router Lathe
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.
Somewhat Simple Lead screw conversion for an OX CNC
Somewhat Simple Lead screw conversion for an OX CNC.
Build Author pek Views 24349
Prusa i3 Bear Half Upgrade v1.0
Stronger frame for Prusa i3 MK2 / MK2s / MK2.5 3D printer
Build Author Dave Pyatt Views 3608
DaveP's Homemade CNC Project
Somewhere along the line sometime around February 2017 I got the bug in my head that I needed to build a CNC router. This is where I am today...
Build Author stephen cia Views 32267
ZideX
3D printer with 7 drivers, compact, dual extruder, no CNC part. All Openbuilds and 3D printed part. This is purely experimental.
Build Author Rodrigo Gonzalez Views 2826
Nightfuel
The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.
Build Author Carl Siren Views 6241
CNC-machine 650by700
A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.
Ox Stainless with ballscrews
Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.
Build Author Chetan PM Views 2986
Composer
Gantry style rigid build