150x75 cm OX with additional Y axis supports and hopefully a working double belt system

In short...this was a fun project.

This Build Is Is Inspired By OOZ Nest CNC, But With Some Changes,

This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router

A simple low cost rotomolder.

The new C-Beam kit expanded to 1000mm . extra support built in for the extents of the travel.

Hello all, wanted to share my custom build that I planed to do. My idea was to drill foam blocks to make molds for my projects. The CNC will be 1500-1500mm with a higher Z-Axis. So I redesigned the Gantry Plates that will be cut out at some other place. I hope you can share your opinion on my project.

Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.

My first openbuilds submission, plain old c-beam machine. Seems like I've spent more time fighting the forum here redirecting in circles than actually building the machine. I'll try to add more pics if I ever find a path out of this corn maze...

First time CNC builder puts together a Lead1010 machine.

CoreXY Table with Symmetric Lead Screw Z axis, Build volume: 293mm x 290.75mm x 223.83mm

While i achieved the desired taler Z axis this was very notable of the cost of the stiffness of the Y axis - the Y axis is now quite wobbly. i do not recommend such a big Z axis on a OX CNC machine where the requirement is a good precision.

Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.

I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.

The Acro Laser Machine Build

A simple to assemble, super clean and safe PSU case solution that fits into the OpenBuilds wire management ecosystem

We are introducing the Cairo Mini 3d-printer! It’s a DIY fully Open-source Reproducible 20x20cm 3d-printer. The original goal of the Cairo Mini 3d-printer is to create a low-cost 3d-printer below 220$(3500 LE). That anyone can build with ease.

This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.

CNC Mini Mill build with some mods after following standard build on Youtube video.

A 750mm x 1000mm Core XY Laser Etcher/Cutter. To cut down on cost I tried to have as many parts as possible be printed.

Portable, high-speed, low-cost advanced multi-tool desktop factory derived from LulzBot Taz and TazMega.

wooden parts of the enclosure can be removed easily used the existing extraction of my glass bead burners

1500 x 1500 mm OpenBuild CNC

OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.

The SMW3D OX, original other than a lot of learning!

Small CNC - made with some custom lasercut+bent sheetmetal parts + Openbuilds V Slot

CNC MILLING ROUTER

Cut Area: 825 x 1340. Max Cutting depth: 2 inches. Arduino based control with Nema 23 and Nema 17 drive. 8mm leadscrew and 2GT belt drive. 400W 48V quite cut spindle.

The goal is to have a relatively strong CNC to be able to cut alu. Working space will be around 800x350x100mm.

A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.

Here is the consolidation of my woodworking shop, a CNC Router!

A small build using some small vslot scrap piece which shows the versatlity of the v-slot system

A plasma table able to cut 4'6" x 8'8" sheet. Low cost as possible.

Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.

A small router for thin plate stock

OpenBuilds CNC 500x500

Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress

This is a cnc router with 3 axis and a kress 1050 motor. Its 140x120cm and a homebuild with your help!

This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.

An OX Router I'd like to modify to improve the frame rigidity and resolve some alignment problems

Simple enclosure for the OB Minimill

I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.

Micro Ox Build

Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)

This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.

Another modification on the OX

The first criteria was portability, the second was cutting out a sheet of ply, the third was the ability to shape a foam surfboard blank, but the main criteria was a small budget.

Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.

Inexpensive plasma table. Accurate, fast, and low maintenance.

Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later

This is my first CNC router build. I want to gain basic CNC building experience so I can go on to build other items such as a frosting or pancake printer.

Used Laguna Swift 4X4 CNC mill with Water-cooled Spindle and RichAuto serial pendant retrofitted with OpenBuilds/Blackbox/Interface

The ooznest OX CNC Machine is based on the OX CNC Machine designed by Mark Carew of Openbuilds, and incorporates many upgrades from the Openbuilds community. Mark Carew based the OX on the Routy, which was in turn based on the Shapeoko

This is a 1500 x 1500 Ox build

My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it

A larger version of the OX.

I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!

An USB Pendant for LinuxCNC / Mach3

My goals for this build were to eliminate slop and flex while also allowing easy serviceability.

This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.

I used the cad designs for the c beam to find a solution to my initial sourcing problem. I figured that I could use 2x 20x20 and 1x 20x80 Profil to create a c beam actuator. I sourced all of the profiles from a local machin builder and t-nuts and screws in my local hardware store. Some parts are currently in 3d printed pla for testing reasons.

Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.

Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.

All metal frame 500mm bed Delta 3D printer

This CNC Router is to 95% made of standard parts and almost all of them from the http://openbuildspartstore.com/.

Larger, more rigid build plate C beam machine

This built is to convert an existing 500x500 C-Beam Machine into 1000x1000. Inspired by several builds including C-Beam Machine : (http://www.openbuilds.com/builds/c-beam%E2%84%A2-machine-plate-maker.2020/) and Gino's build : (http://www.openbuilds.com/builds/c-beam-gtc.3250/)

I love to build things. I decided to build a CNC machine to help me build more things! I had a lot of fun and I learn a lot of thing in the process of building this machine. p.s. my primary language is french not english. Forgive me if I made some mistake.

1000mm X 1000mm overhead cnc machine

C-Beam inspired CnC Router (1000x750) Approx 90mm of Z travel

Trying to build a machine of atleast 4x4ft working area. Work is in progress, hope to finish it soon

A short summary of my Workbee CNC Build. I try to update it where I can

I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.

I just did my first Powder coat paint job on a Z Axis with 9inchs of travel for the DIY CNC Plasma Cutter, Mill Head, Router, Engraver, Laser Head, Water Jet Cutter Machine. 2 different Z Axis ride plates and a 80mm Router/Mill Head/Spindle clamp. Baked on finish in a old oven i had.

The reason for building this CNC is to help me in my guitar building hobby. (telecasters)

This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.

Home Made CNC Router from Scrape

This started as an attempt to learn to weld and quickly took on a life of its own.

This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !

I am satisfied with my build and next one will be even better.

The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.

A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.

This is a upgrade to make a little deeper and a little bigger foot print for cutting. This is a copy of design off Rob Taylor idea for Dbl C Beam setup. The goal though is to design it around a new build with minimal tools for some one with no cnc access. Drillpress and drill bits and tap set. A 10in Non ferrous metal cutting blade for my table saw. Paper printer for printing DXF files.

C-Beam Plate cutter with Raspberry Pi V3, Arduino Mega2560 and Camera. Remote login & operation via SSH with cnc.js server, mjpg server on the Pi.

Workbee 1510 screw driven build by MsDosFX.

The OpenCase Mounting Kit makes wire management quick and easy!

C beam cnc modified

Theoretical Working area: 38" x 24" x 6" Actual Working Area: 31" x 23.6" x 4" Positioning Accuracy: about 0.01mm

This is my CNC build. My goal is to have fun and learn some new things.

Not completed yet but it does work, I will be changing small things as I finish the build and I have learned a lot from this build I am looking forward to finishing this one and Building another maybe larger table.

A small business idea led us here, lets see where it will go.

Need cnc to make alumunium sign, brass stamp, etc

This is our first CNC project is based on OX CNC. We show you some pictures about our progress. We finished assembly design, software test and drivers test, now we are building the machine.

I'm starting my first own build cnc machine which is inspired by routy and the ox. Were my goal was not to use the ox plates but use the standard plates available in the parts store for the design.

This is my first attempt at building a spindle based CNC machine. The intention is to mill PCB boards and mill delrin blocks. The device was built with an Emergency Stop that actually cuts power to the spindle and motors. This is a post build write-up and consists of finished photo compilation and CAD renderings.

This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits

This is a design for a desktop CNC machine. It may be a router or laser. I am undecided as to the final design.

First build of a Lead 1515!

blueprints here: https://github.com/tomaspavlica/cnc_pkb2

Just an idea right now but will attempt a prototype in the near future. Not sure if this has been tried before or not.....