Select a Category
Build Author Ryan Lock Views 68455
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author Silverrabbit2 Views 3165
Ooznest OX, Workbench, & Folding Table
An OX based unit with innovation surrounding it -- 9 drawers, workbench, folding CNC table, & portability.
Build Author IndyMaker Views 3606
Ooznest Ox with 3D Printed Gantry Plates
Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.
Build Author Teflon4 Views 9437
TZ C-Beam Machine Plate Maker
A Modified and augmented Ooznest C-Beam Machine Plate Maker.
Build Author mikev Views 1182
C-Beam Evolution MkII
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII. Currently I am in the process of fitting the limit switches and adding motor wiring and cable chains
Build Author gavspav Views 3687
Ooznest build - 1500mm x 1000mm
Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.
Build Author Jen Views 3513
My first OX build
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
Build Author kev20009 Views 5147
This Build Is Is Inspired By OOZ Nest CNC, But With Some Changes,
Build Author Kjell Views 2255
1x1m Ooznest Ox
Building my first router and I choose the ooznest Ox since it looks to be the latest and greatest among routers.
Build Author Jan Turnnherr Views 2302
Ooznest OX CNC for Architecture Modell
While i achieved the desired taler Z axis this was very notable of the cost of the stiffness of the Y axis - the Y axis is now quite wobbly. i do not recommend such a big Z axis on a OX CNC machine where the requirement is a good precision.
Build Author rcKeith Views 6085
Ooznest OX CNC Build
Ooznest OX CNC build
Build Author Calamari Views 3330
First Ooznest OX
The ooznest OX CNC Machine is based on the OX CNC Machine designed by Mark Carew of Openbuilds, and incorporates many upgrades from the Openbuilds community. Mark Carew based the OX on the Routy, which was in turn based on the Shapeoko