Welcome to Our Community

Some features disabled for guests. Register Today.

      1. Build Progress:
        • Build in Progress...
      Rate This Build
      0/5,
      0 votes
      I had some leftover OpenBuilds parts:

      6 x 20x80 500mm
      1 x 20x60 500mm
      1 x 20x60 250mm
      2x spacer blocks (Z)
      V Wheels

      But no off the shelf carriages :( and shipping is expensive :)

      So I did what any hacker would do, I took what I had, and added some custom parts (Sent off for lasercutting, if you in the US and looking to get parts cut I recommend ClockWerk Mech) to make up the differences

      Desgined to use 12mm round NPN inductive endstops all round
      Mark Carew and Paul Reed like this.
  • Loading...
  • Build Details

    Build License:
    • CC - Attribution NonCommercial - CC BY NC

    Reason for this Build

    To test Brain+Muscles (; - Mark knows what I mean
  • Attached Files: