Build List
-
Active Filters:
1
Sphinx 55 on MGN12 linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw
![OX Based cnc 3000 x 1500 Double belt](https://openbuilds.com/data/article_images/l/4/4037.jpg?t=1476802440)
Build Author
sebf34
Views
30471
OX Based cnc 3000 x 1500 Double belt
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX Based CNC
![LEAD CNC 1010 (40](https://openbuilds.com/data/article_images/l/7/7832.jpg?t=1543351749)
Build Author
Mark Carew
Views
180855
LEAD CNC 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!
![Standalone Torch Height Controller for CNC Plasma Cutting](https://openbuilds.com/data/article_images/l/9/9571.jpg?t=1601852808)
Build Author
Retsaj
Views
53413
Standalone Torch Height Controller for CNC Plasma Cutting
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)
![M4: 1510SS Heavy Mk.I](https://openbuilds.com/data/article_images/l/9/9393.jpg?t=1598081959)
Build Author
Rob Taylor
Views
16024
M4: 1510SS Heavy Mk.I
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.
![1510 Workbee Modified](https://openbuilds.com/data/article_images/l/7/7967.jpg?t=1548191941)
Build Author
Jacob Lotter
Views
22185
1510 Workbee Modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
INDY-TR12 CNC (12mm Diameter Lead Screws)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
23099
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
![TACIT RONIN CNC - Flood Coolant Enabled C-Beam](https://openbuilds.com/data/article_images/l/3/3396.jpg?t=1463500781)
Build Author
alex_b
Views
16658
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
C-Beam XXLarge "Tank"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a modified build C-Beam XLarge. 1000mm C-Beam used for X and Y axis, and the Y Axis moves the X bridge, not the material being worked.
Openbuilds C-beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is a build supported by Ooznest by a team of girls in Year 8 (12/13 years old) to machine model F1 cars for the F1 in Schools competition.
![High Z Mod for Lead CNC](https://openbuilds.com/data/article_images/l/8/8869.jpg?t=1570825850)
Build Author
Mark Carew
Views
29292
High Z Mod for Lead CNC
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18195
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
Ballmasters 1605 1500x1000 ox cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
Shawn's Workbee 1510
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Shawn's adventure in assembling and customizing the Openbuild's version of the 1500x1000 Workbee.
Large 'Double H-Bot' using Openbuilds 2040 v-slot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.
![RigidOko](https://openbuilds.com/data/article_images/l/5/5766.jpg?t=1545414342)
Build Author
SecretSpy711
Views
19962
RigidOko
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
LEAD 1515, HGH15, SFU1604 Ball Screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Project Completed.
![300mm Diameter, 1 Meter tall, Delta 3d Printer](https://openbuilds.com/data/article_images/l/6/6136.jpg?t=1515346235)
Build Author
Gerald Klein
Views
13654
300mm Diameter, 1 Meter tall, Delta 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.
![Lab Power Supply + Soldering Station](https://openbuilds.com/data/article_images/l/6/6861.jpg?t=1521067862)
Build Author
uGen
Views
16995
Lab Power Supply + Soldering Station
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron
![Sphinx 1050](https://openbuilds.com/data/article_images/l/7/7822.jpg?t=1543130548)
Build Author
Kyo
Views
31568
Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
![C-Beam XL - TinyG - Aluminium Plate - Dewalt 611](https://openbuilds.com/data/article_images/l/4/4285.jpg?t=1485886261)
Build Author
jamesdjadams
Views
11217
C-Beam XL - TinyG - Aluminium Plate - Dewalt 611
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL build using TinyG V8.
![Rigid Compact Desktop C-BEAM](https://openbuilds.com/data/article_images/l/9/9887.jpg?t=1617382213)
Build Author
nickchnv
Views
10194
Rigid Compact Desktop C-BEAM
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modified C-Beam, is a compact, powerful and affordable desktop CNC.
![BeTrue3D Printer](https://openbuilds.com/data/article_images/l/4/4306.jpg?t=1485199929)
Build Author
BeTrue3D
Views
20211
BeTrue3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
C-Beam 1M
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Basing this build on the C-Beam machine XL on the parts store, but added a few things to make it more like the C-Beam XXLarge "Tank" by Dollarz81. Going with the Dewalt 611 instead of a water cooled spindle at first. May change down the road. Using a Panucat Gradus M1 controller with BigFoot drivers.
![Beamlazer Laser cutter CO2 100W](https://openbuilds.com/data/article_images/l/7/7313.jpg?t=1538334383)
Build Author
Kims3DIY
Views
16782
Beamlazer Laser cutter CO2 100W
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.
![Vulcan MAX](https://openbuilds.com/data/article_images/l/9/9397.jpg?t=1593797244)
Build Author
Keith Davis
Views
20341
Vulcan MAX
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
While mimicing the frame platform of the popular Crealiy CR-10 and Ender series, the Vulcan MAX overcomes design weaknesses in both printers. Chief improvements are a more stable, rigid mounting of the Z frame and Z gantry.
![Lead1010 Build with Enclosure](https://openbuilds.com/data/article_images/l/9/9428.jpg?t=1595361049)
Build Author
StrictlyScale
Views
6914
Lead1010 Build with Enclosure
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First time CNC builder puts together a Lead1010 machine.
![OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative](https://openbuilds.com/data/article_images/l/3/3585.jpg?t=1466530123)
Build Author
Julius
Views
23709
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
![Build #2 - Bigger & Stronger](https://openbuilds.com/data/article_images/l/5/5402.jpg?t=1515568204)
Build Author
JWhitten
Views
12938
Build #2 - Bigger & Stronger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
![The Floating Dust Shoe](https://openbuilds.com/data/article_images/l/6/6237.jpg?t=1516176994)
Build Author
Eric Jacobsson
Views
13130
The Floating Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
![Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)](https://openbuilds.com/data/article_images/l/8/8485.jpg?t=1567627790)
Build Author
viktop
Views
15939
Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX-inspired mini desktop mill.
![Lead CNC 1510 modified](https://openbuilds.com/data/article_images/l/8/8843.jpg?t=1572455082)
Build Author
Marco964
Views
7848
Lead CNC 1510 modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is an Openbuilds LEAD 1510, modified to supports a liquid cooled 1.5Kw spindle. The movements are made with lead screw on all three axes.
![YACLR CNC](https://openbuilds.com/data/article_images/l/7/7076.jpg?t=1534106561)
Build Author
HuguesP
Views
8217
YACLR CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
![OpenBuilds Workbee 1010 (40](https://openbuilds.com/data/article_images/l/7/7198.jpg?t=1529023423)
Build Author
Mark Carew
Views
69077
OpenBuilds Workbee 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
![Portable self-contained Lead 1010 table](https://openbuilds.com/data/article_images/l/10/10331.jpg?t=1658164662)
Build Author
Frank Del Favero
Views
5557
Portable self-contained Lead 1010 table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have a two car garage NOT devoted to 3d printing or CNC. I have set aside a space for my 3d printer and a place to store my portable CNC table. The reason it’s portable is so that I wheel and can use my Lead 1010 outside where it won’t make a mess in the garage. The table is self contained. It houses a vac system as well as my CNC tools and supplies.
![Openbuilds rovo laser mini(오픈빌드)](https://openbuilds.com/data/article_images/l/2/2095.jpg?t=1430628083)
Build Author
inhan
Views
19840
Openbuilds rovo laser mini(오픈빌드)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.
![RONIN OX | The G10/Carbon Fiber Hogger](https://openbuilds.com/data/article_images/l/2/2876.jpg?t=1447906012)
Build Author
alex_b
Views
14211
RONIN OX | The G10/Carbon Fiber Hogger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
![OpenBuilds Workbee 1510 (60](https://openbuilds.com/data/article_images/l/7/7189.jpg?t=1529014366)
Build Author
Mark Carew
Views
77118
OpenBuilds Workbee 1510 (60" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
![Upgrading the C-Beam machine](https://openbuilds.com/data/article_images/l/3/3473.jpg?t=1464068790)
Build Author
Ronald van Arkel
Views
15334
Upgrading the C-Beam machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Custom Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Custom black and red Big Ox
![DM C-Beam XXL Tank](https://openbuilds.com/data/article_images/l/5/5817.jpg?t=1509330303)
Build Author
dmasters
Views
7346
DM C-Beam XXL Tank
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 1000mm C-Beam XXL CNC with external drivers and high torque Nema 23 motors, 2.2KW Spindle with VFD.
Workbee with Duet controller
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Workbee 1010 with Duet controller from Ooznest
![1000mm X 1500mm OX CNC -- Fiber/Garolite](https://openbuilds.com/data/article_images/l/1/1289.jpg?t=1414951188)
Build Author
SlyClockWerkz
Views
15747
1000mm X 1500mm OX CNC -- Fiber/Garolite
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building the full size OX.
![C-Beam Rigid - 'The Hog'](https://openbuilds.com/data/article_images/l/3/3039.jpg?t=1493136162)
Build Author
ymilord
Views
21453
C-Beam Rigid - 'The Hog'
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.
![Sphinx 55](https://openbuilds.com/data/article_images/l/9/9795.jpg?t=1612990846)
Build Author
Kyo
Views
22672
Sphinx 55
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.
![Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)](https://openbuilds.com/data/article_images/l/6/6989.jpg?t=1522940325)
Build Author
Tommy Williamson
Views
5539
Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
![Hotwire cnc Surfboards](https://openbuilds.com/data/article_images/l/9/9769.jpg?t=1667476118)
Build Author
2SIsurf
Views
4680
Hotwire cnc Surfboards
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Xl 2 axis foam cutter Eps Surfboard blanks Simple open concept but high production machine. Shape 3d case with open builds controller
C-Beam Sphinx Vacuum
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A modified 1000x1000 Sphinx, with a built in vaccum table.
![Rob's C-Beam Machine XLarge](https://openbuilds.com/data/article_images/l/6/6456.jpg?t=1518301955)
Build Author
Rob Mahan
Views
11629
Rob's C-Beam Machine XLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
![OpenBuilds Sphinx 1050 (20](https://openbuilds.com/data/article_images/l/7/7196.jpg?t=1529007338)
Build Author
Mark Carew
Views
29197
OpenBuilds Sphinx 1050 (20" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
![Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019](https://openbuilds.com/data/article_images/l/8/8288.jpg?t=1553609218)
Build Author
obmilllivebuild
Views
10478
Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Transformation of an OpenBuilds Mini Mill into a convertible 3D printer / CNC mill with interchangeable tooling. Maybe a bonus conversion TBD.
![Ball Screw Carrier.](https://openbuilds.com/data/article_images/l/9/9656.jpg?t=1606782124)
Build Author
Corey Corbin
Views
5068
Ball Screw Carrier.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Create a ball screw carrier with out BF BK bearing blocks.
![The BlackBee CNC](https://openbuilds.com/data/article_images/l/9/9848.jpg?t=1615570664)
Build Author
CNCGear
Views
8632
The BlackBee CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Ball screw drive, linear rail CNC Kit
CubeFoot CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This small desktop machine is built inside a 300mm cube of 20mm extrusion. Work area is 14cm by 14cm. I used 400 step nema17 motors all around.
1000mm X 1000mm with tinyg
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm X 1000mm overhead cnc machine
![ACRO 20x20](https://openbuilds.com/data/article_images/l/6/6923.jpg?t=1521926278)
Build Author
pedrofernandez
Views
6664
ACRO 20x20
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Acro Laser Machine Build
![Tronxy X1 extension](https://openbuilds.com/data/article_images/l/7/7749.jpg?t=1540327798)
Build Author
Luke Cunningham
Views
5006
Tronxy X1 extension
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Video on youtube: https://www.youtube.com/watch?v=vCTbLZ2_m-w&t=36s
![Upgrading Your 3D Printer With Synchronous Leveling](https://openbuilds.com/data/article_images/l/9/9159.jpg?t=1580588676)
Build Author
Keith Davis
Views
8467
Upgrading Your 3D Printer With Synchronous Leveling
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Upgrading printers for Synchronous Leveling
Vulcan Pro V2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Contains a further modification to Creality's poor CR-10 design
OpenBuilds LEAD CNC Machine 1515 (60" x 60")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
It began with creating an extremely rigid axis that incorporates a multi C-Beam Linear Rail system as well as precision lead screws coupled with a tension system for the absolute maximum in performance.
![OX / X3 CNC / Similar Z axis / 1605 Linear Actuator](https://openbuilds.com/data/article_images/l/3/3265.jpg?t=1457964143)
Build Author
Colin Russon
Views
8192
OX / X3 CNC / Similar Z axis / 1605 Linear Actuator
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Z axes 1605 ballscrew, a comparative design proposal.
![MiniMill Smoothie](https://openbuilds.com/data/article_images/l/5/5293.jpg?t=1503798101)
Build Author
Andrew Helsel
Views
11030
MiniMill Smoothie
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
MiniMill with DW611 and SmoothieBoard 4x v1.1
![Stainless OX Kit Build](https://openbuilds.com/data/article_images/l/5/5790.jpg?t=1511062628)
Build Author
Tucstrlly
Views
7780
Stainless OX Kit Build "Diamondback CNC"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
![DaveP's Homemade CNC Project](https://openbuilds.com/data/article_images/l/6/6123.jpg?t=1515195329)
Build Author
Dave Pyatt
Views
3673
DaveP's Homemade CNC Project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Somewhere along the line sometime around February 2017 I got the bug in my head that I needed to build a CNC router. This is where I am today...
![Fixed Gantry CNC Router with Old Industrial Supplies](https://openbuilds.com/data/article_images/l/6/6536.jpg?t=1546123345)
Build Author
MattR
Views
14782
Fixed Gantry CNC Router with Old Industrial Supplies
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
![OP C-Beam Machine XL by ChrisViral](https://openbuilds.com/data/article_images/l/7/7190.jpg?t=1528829194)
Build Author
ChrisViral
Views
5836
OP C-Beam Machine XL by ChrisViral
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
WorkBee 1510 - First CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build will go through the construction of a WorkBee 1510 kit from the OpenBuilds Part Store, all mechanical and electrical components were purchased from the store in late October 2018.
OpenBuilds LEAD Machine 1010 40" x 40"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Openbuilds LEAD machine 1010 build
Bored in the garage enclosure build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
2 days to build Up and running some EMI issues but I think I have them resolved Big shoutout to the community
LEAD 710 with High Z mod
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Overview of a 700mm x 1000mm machine based on the LEAD design and with the High Z mod from the start. Will have a parts list you can use to build yourself if you like the formfactor
![ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile](https://openbuilds.com/data/article_images/l/2/2430.jpg?t=1439504766)
Build Author
zelos
Views
18023
ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Zelos Laser Cutter Version 2.0 GRBL Shield with Nema 17 motors. 2 Watt laser for cutting and fine grayscale pictures built very sturdy and modular
![OpenBuilds C-beam 15mm belt on 1500mm C-Beam.](https://openbuilds.com/data/article_images/l/3/3457.jpg?t=1463622960)
Build Author
Dave420
Views
13111
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
Pure Cbeam 900x1000
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
![My C Beam - NEMA 17 - GRBL- Arduino project](https://openbuilds.com/data/article_images/l/5/5076.jpg?t=1503064485)
Build Author
Huub65
Views
7516
My C Beam - NEMA 17 - GRBL- Arduino project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.
![DIY Flywheel Camera Slider](https://openbuilds.com/data/article_images/l/5/5181.jpg?t=1496883214)
Build Author
Beam
Views
9468
DIY Flywheel Camera Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My take on a non affordable slider.
Portable Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.
Phil's Workbee
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Wanted a nice project to work and learn on... now have a big CNC to play with A 1500x1000mm Workbee
![The Forever Project](https://openbuilds.com/data/article_images/l/7/7977.jpg?t=1543788838)
Build Author
Bikes and Beer
Views
3809
The Forever Project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Workbee 1010 Lead Screw with water cooled spindle and enclosure
"Stung by the Bee" OB Workbee 1010 Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be a build Log for my Open Builds Workbee 1010 Build. I will keep a full descriptive log of the build and make any notes in the hope that it will help other builders that decide they would like to build this machine.
![27](https://openbuilds.com/data/article_images/l/9/9116.jpg?t=1593321340)
Build Author
mathom713
Views
8587
27" by 40" CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
DIY design and build of a roughing 2' by 3.5' CNC router
1515 Deluxe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Build features include a double c-beam gantry (bonded & mechanically fastened), linear x rails, custom gantry end plates, a custom linear rail & ballscrew Z axis, and custom lead screw tensioning plates. The primary goal was to remove twist from the 1500mm gantry & stiffen the Z axis.
![WorkBee 1010](https://openbuilds.com/data/article_images/l/9/9237.jpg?t=1583420438)
Build Author
txcomp
Views
5736
WorkBee 1010 "Get Rid of the Slop" Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My goals for this build were to eliminate slop and flex while also allowing easy serviceability.
![SolidCore CoreXY 3D Printer](https://openbuilds.com/data/article_images/l/9/9334.jpg?t=1588996964)
Build Author
shanehooper
Views
12562
SolidCore CoreXY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Modular and Scalable CoreXY Printer with all metal parts.
![Laguna Swift 4X4 CNC mill retrofitted with OpenBuilds](https://openbuilds.com/data/article_images/l/10/10012.jpg?t=1626972458)
Build Author
Quentin Karmark
Views
5979
Laguna Swift 4X4 CNC mill retrofitted with OpenBuilds
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Used Laguna Swift 4X4 CNC mill with Water-cooled Spindle and RichAuto serial pendant retrofitted with OpenBuilds/Blackbox/Interface
![OpenBuilds Lead 1515](https://openbuilds.com/data/article_images/l/10/10293.jpg?t=1650393599)
Build Author
Shaun Weitzel
Views
4835
OpenBuilds Lead 1515
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First build of a Lead 1515!
Sphinx 66
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A Sphinx Linear rail build (600mm x 600mm) hence the title Sphinx66. Plates supplied by Chris Laidlaw. Linear rails used MGN15
C-BEAM 1K
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The new C-Beam kit expanded to 1000mm . extra support built in for the extents of the travel.
Beaver's OX 1500
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX 1500mm x 1500mm w/1.5Kw Water Cooled Spindle & VFD ran by a Gecko G540 & Mach3
![Neptunes Ox](https://openbuilds.com/data/article_images/l/2/2991.jpg?t=1467556198)
Build Author
Neptunes Guitars
Views
7477
Neptunes Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First build of CNC OX for the purpose of using it for Guitar building to take a lot of the muscle work out so I can concentrate on the finer details.
Linear Rail for Dobot Magician
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
This is a simpel build of a Linear rail for the Dobot Magician.
Live D-bot build at MRRF 2017 (Mar 25-26)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
![C-Beam - Sphinx 1000x1000mm inspired by Kyo](https://openbuilds.com/data/article_images/l/6/6611.jpg?t=1519313313)
Build Author
spark2
Views
4405
C-Beam - Sphinx 1000x1000mm inspired by Kyo
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.
![WorkBee 1000x2000 ACME Screw Version](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Axnfell
Views
2272
WorkBee 1000x2000 ACME Screw Version
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Hoping to build a WorkBee 1000 x 1000 (2000) from parts and not a kit, cannot afford the kit in full so going the long way round...
![Arduino Grbl Laser CNC](https://openbuilds.com/data/article_images/l/7/7170.jpg?t=1527625247)
Build Author
jpjoshua
Views
10740
Arduino Grbl Laser CNC
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Arduino powered Laser CNC using GRBl firmware.
![OpenBuilds PowerCase](https://openbuilds.com/data/article_images/l/7/7836.jpg?t=1542228986)
Build Author
Mark Carew
Views
6637
OpenBuilds PowerCase
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple to assemble, super clean and safe PSU case solution that fits into the OpenBuilds wire management ecosystem
![C-Beam Mods](https://openbuilds.com/data/article_images/l/8/8929.jpg?t=1571893487)
Build Author
tmadrms
Views
6107
C-Beam Mods
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam machine mods.
![BD's Burn Box - ACRO Laser Engraver System](https://openbuilds.com/data/article_images/l/9/9010.jpg?t=1574574338)
Build Author
Bruce Walker
Views
5867
BD's Burn Box - ACRO Laser Engraver System
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.
![40x40 V-Slot Rod Type Linear Actuator](https://openbuilds.com/data/article_images/l/9/9196.jpg?t=1581687266)
Build Author
Martin.Barfoed
Views
5121
40x40 V-Slot Rod Type Linear Actuator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
A Rod-type Linear Actuator based on the 40x40 V-slot profile
![Modified Sphinx 55 with MGN12 linear rails](https://openbuilds.com/data/article_images/l/9/9456.jpg?t=1596345440)
Build Author
Wes Dwight
Views
6077
Modified Sphinx 55 with MGN12 linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)