Build List
plasma cnc
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Homemade plasma cnc
Small Red OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small router for thin plate stock
V-slot and MDF DeltaBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a deltabot 3D printer build using CNC routed MDF and v-slot rails. Full description found in instructables.com.
![Niko’s Egg-painter robot (OpenBuilds)](https://openbuilds.com/data/article_images/l/1/1953.jpg?t=1427845771)
Build Author
gianakop
Views
43834
Niko’s Egg-painter robot (OpenBuilds)
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
This EggBot design has a perfect functionality (the same as the original EggBot professional), a perfect cable and microcontroller arrangement, and a perfect cost as it uses a minimum list of parts (with one V-Slot Linear Rail size20mm x 80mm and length 500mm you can build 3 EggBots!)
![Openbuilds rovo laser mini(오픈빌드)](https://openbuilds.com/data/article_images/l/2/2095.jpg?t=1430628083)
Build Author
inhan
Views
19839
Openbuilds rovo laser mini(오픈빌드)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.
The Laserbox
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A low cost and easy to build laser cutter based on 2.8w laser diode .
CoreXY W/ Fixed Build Plate & Enclosure
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a Core XY printer with a fixed build plate from off the shelf parts.
Steel Frame 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A steel framed 3D printer using a similar design with my CNC Router.
![C-Beam Rigid - 'The Hog'](https://openbuilds.com/data/article_images/l/3/3039.jpg?t=1493136162)
Build Author
ymilord
Views
21452
C-Beam Rigid - 'The Hog'
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.
![UltiFaker 2 Go](https://openbuilds.com/data/article_images/l/3/3141.jpg?t=1458585991)
Build Author
PaulS
Views
19469
UltiFaker 2 Go
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.
CNC Rotary Table Rotational Axis, A Axis B Axis 4th 5th Axis CNC Dividing Head
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first major project.
C-BEAM-GTC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building a larger C-BEAM CNC Machine with no previous experience.
![OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative](https://openbuilds.com/data/article_images/l/3/3585.jpg?t=1466530123)
Build Author
Julius
Views
23708
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
Laser engraving machine
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Second better project, high durable mainframe, silent work, non vibration.
TrueUp Glide
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.
![C-Beam Lead Screw CNC Mountain](https://openbuilds.com/data/article_images/l/3/3947.jpg?t=1478950296)
Build Author
Savvas
Views
18168
C-Beam Lead Screw CNC Mountain
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
![OX Heavy Duty Build](https://openbuilds.com/data/article_images/l/4/4223.jpg?t=1491879759)
Build Author
Gary Caruso
Views
23396
OX Heavy Duty Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX Heavy Duty, using Chrisclub plates, for 2080 X-Y and C-beam Z
![BF3D OX (Big Freakin' 3D OX)](https://openbuilds.com/data/article_images/l/4/4498.jpg?t=1496452101)
Build Author
Bud Griffin
Views
10616
BF3D OX (Big Freakin' 3D OX)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is my latest printer build. The second printer I've built using V-Slot.
MiniMill Z Axis Upgrade with Offset Motor
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgrade your Minimill with an off-set Z Axis Motor
Ballmasters 1605 1500x1000 ox cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
Improved CBM
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet another build of an improved C-Beam Machine, improving stiffness, size, versatility, and strength without increasing costs much.
![The Plastic Beast CoreXY Printer](https://openbuilds.com/data/article_images/l/6/6698.jpg?t=1519785516)
Build Author
cdsmith12
Views
25043
The Plastic Beast CoreXY Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
In my opinion, this is the easiest and most complete tutorial to walk you through building a large platform 3D printer and the Sketchup File is included for you to make any changes needed.. The Plastic Beast is a CoreXY Printer with a build platform of 440mm square. You can print 600mm or about 23 inches diagonal. Any level of user from novice to expert should gain something from my tutorial.
Textile Drawing Machine
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
Textile Drawing Machine is a drawing machine thought specifically to draw on textile. Unlike other CNC machine it's dimensions follow the standard textile dimensions (1500mm) and it's on wheels to allow to draw on an unlimited area. TDM has been developed for the project Digital Wax Print, a self initiated research project, carried out by The Future Continuous, a collabration between Olivia De Gouveia and Eugenia Morpurgo.
Some Improvements on the Workbee 1000x1000
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Improvements both real and suggested for the Workbee assembly
![LEAD CNC 1010 (40](https://openbuilds.com/data/article_images/l/7/7832.jpg?t=1543351749)
Build Author
Mark Carew
Views
180835
LEAD CNC 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!
![1510 Workbee Modified](https://openbuilds.com/data/article_images/l/7/7967.jpg?t=1548191941)
Build Author
Jacob Lotter
Views
22180
1510 Workbee Modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
![CNC ESS Controls System](https://openbuilds.com/data/article_images/l/8/8144.jpg?t=1548191018)
Build Author
Jacob Lotter
Views
4185
CNC ESS Controls System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.
The BEE and ME
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
![Simple Cnc System (arduino Grbl)](https://openbuilds.com/data/article_images/l/8/8474.jpg?t=1556544699)
Build Author
viktop
Views
21174
Simple Cnc System (arduino Grbl)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
OpenBuilds ACRO Z Axis
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Z-Axis for OpenBuilds ACRO system. It is sturdy enough to carry a small drill.
![Router / plasma cutting table ( Rack and pinion )](https://openbuilds.com/data/article_images/l/8/8838.jpg?t=1572632620)
Build Author
mytechno3d
Views
24346
Router / plasma cutting table ( Rack and pinion )
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy DIY plasma cutting table
![RIGCNC](https://openbuilds.com/data/article_images/l/10/10018.jpg?t=1627744108)
Build Author
Ryan155
Views
9086
RIGCNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I made a mill from first principles because I didn't like any of the ones that were out there, More info can be found on the website RigCNC.com
Camera slider for stacking focus
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is just a small project to get use to the OpenBuild products.
Suitcase Vacuumformer
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Quick overview of my build up for a vacuum former that is self contained, portable and fairly easy to build.
Richrap 3DR Mashup
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A work in progress. working to refine the print head/carriage to integrate a bed level probe directly into the print head.
Tool position setting Part III.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
In this, the final part, I would like to introduce Machine Vision and show how it can be used, not only for tool position setting but also for resolving the triangle to calculate the G68 (local system rotated) for jobs which are not squarely placed on the work table.
Flexible Axis Revolving Tool-holder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Drag knife and pen holder which mounts in spindle collet.
![Optical Limit + Home Switches](https://openbuilds.com/data/article_images/l/0/512.jpg?t=1391894204)
Build Author
The Dude
Views
19222
Optical Limit + Home Switches
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Optical home and limit switches for cnc, 3D printers, laser cutters, etc.
![Aluminum Ox](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
richthorn
Views
7522
Aluminum Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.
![BldrBot S2](https://openbuilds.com/data/article_images/l/0/632.jpg?t=1580431332)
Build Author
Keith Davis
Views
17919
BldrBot S2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Prusa i3 design running on Open Build's mini V wheels
Vslot Kossel
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Base is a Delta Kossel Printer modified to be build with openbuild parts like vslot 20x40 , pulley .... It inclued the latest modification for auto level : FSR
![myOX : a 4' x 2' OX CNC with potential](https://openbuilds.com/data/article_images/l/0/915.jpg?t=1458009996)
Build Author
Serge E.
Views
59062
myOX : a 4' x 2' OX CNC with potential
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Florida Ox 2x4 Area 51 CNC Parts Original Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
2x4 Ox with Vac table
![YAOP (Yet Another Openbuilds Printer)](https://openbuilds.com/data/article_images/l/1/1493.jpg?t=1418414947)
Build Author
winand
Views
15619
YAOP (Yet Another Openbuilds Printer)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Yet Another Openbuilds Printer, my version :-P
OX Fixed Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A simple fixed dust shoe for your OX.
![M Cubed CNC Mill](https://openbuilds.com/data/article_images/l/1/1634.jpg?t=1421382482)
Build Author
M^3
Views
20526
M Cubed CNC Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A no-nonsense CNC mini mill to get the job done.
![openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)](https://openbuilds.com/data/article_images/l/1/1657.jpg?t=1422099227)
Build Author
openhardwarecoza
Views
27109
openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter
![Prusa i3 (Acrylic frame with OB rods)](https://openbuilds.com/data/article_images/l/1/1739.jpg?t=1423287009)
Build Author
dddman
Views
12767
Prusa i3 (Acrylic frame with OB rods)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The Prusa i3 (iteration 3) is the newest and most current 3D Printer design by RepRap Core Developer Prusajr (source: http://reprap.org/wiki/Prusa_i3)
iTopie RepRap - 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A stable and strong 3D printer made of 16mm MDF and machined on my OX.
Black Panther QR
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The QuadRap 3D printer version based on OpenBuilds wheels. Born in https://plus.google.com/u/0/communities/103539262895202172380
CraneBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A minimum parts build with belt driven Z-axis.
cnc plasma table
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
ive got most of the wire harness made up too im using Chinese electronics for now I will upgrade later when this thing makes me some cash lol im using a ibm think center to case to hold my electronics ive got a 25' parallel cable to put some distance between the table and the computer
OX Tale
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
![V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES](https://openbuilds.com/data/article_images/l/1/1949.jpg?t=1433097153)
Build Author
Darren Ditto
Views
9480
V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint
Cebu
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Another build based on the venerable OX. xPRO CNC controller, and a few extras.
Plasma cutter - 608 on steel tube version
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
CNC Plasma cutter: 608ZZ on steel square tube linear rollers Welded frame HDT2-15 Belt Drive Tradeweld Cut-40 Plasma cutter with converted hand torch Virtual Torch Height Control through inductive probing - open source electronics project
![CNC Router Lathe](https://openbuilds.com/data/article_images/l/2/2145.jpg?t=1466800036)
Build Author
Rakmup
Views
39548
CNC Router Lathe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.
![Pot Plotter](https://openbuilds.com/data/article_images/l/2/2178.jpg?t=1432475022)
Build Author
Anglesachse
Views
26152
Pot Plotter
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
My version of the Mug Plotter designed by Teed http://edinburghhacklab.com/ . Also used the Eibotboard from the original eggbot from evilmadscientists http://shop.evilmadscientist.com/partsmenu/188-ebb A huge thanks to Hexitex for his brilliant Four jaw chuck http://www.thingiverse.com/thing:5791
![Triple Shot R-P-M Area 51 CNC Parts](https://openbuilds.com/data/article_images/l/2/2307.jpg?t=1444529606)
Build Author
Hytech2k
Views
32597
Triple Shot R-P-M Area 51 CNC Parts
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
We wanted to create a rapid prototyping machine with excellent 3D printing, laser cutting and engraving, and light CNC router work capabilities.
Small drill press fence
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A small build using some small vslot scrap piece which shows the versatlity of the v-slot system
GrOX (OX based router)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 1500mm OX router using Openbuilds parts and plates by Chris Laidlaw
![V-Slot Laser cutter and engraver](https://openbuilds.com/data/article_images/l/2/2617.jpg?t=1442812649)
Build Author
Yoshiya Arii
Views
39045
V-Slot Laser cutter and engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Smart Laser Mini is an open source such as use Raspberry pi. Easy to assemble type of desktop laser cutter and engraver. Also we used V-slot
TITANXY (Fixed Build Plate, Quad Z Screw, CoreXY)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Super Rigid CoreXY 3D Printer
![MakerSL MSL-5 Cantilevered 3D Printer](https://openbuilds.com/data/article_images/l/3/3179.jpg?t=1466722048)
Build Author
Sonny Lowe
Views
29729
MakerSL MSL-5 Cantilevered 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
Laser Mount
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This is a mount I wanted to build for a laser project using OpenBuilds part router mount.
Pelican Case 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A portable 3D Printer that can flat pack into a hard carry case
Roberta Clementine
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The Roberta Clementine a proof of concept and progenitor to the series of printers I will be calling the Clementine Sisters. The printer is named after Pittsburgh Pirates baseball player Roberto Clemente. Although it is more accurate to say the printer is named after the school I work for which is named after Clemente the Roberto Clemente Charter School. http://www.myrccs.com Roberta is the first and not really built to last but instead built to test ideas and to produce the parts for successors
![The MakerSL Customized OB Minimill](https://openbuilds.com/data/article_images/l/3/3647.jpg?t=1498037174)
Build Author
Sonny Lowe
Views
6020
The MakerSL Customized OB Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
Vertek CNC - 1000mm x 750mm Linear Rail on C Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
C beam gantry with steel guide rails!
Black Rabbit 1500
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
TesseractXY (MendelMax 1.5 version)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
History about making 3d printer.
Controlbox for a CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.
C-Beam to C-Beam XL Upgrade
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first public build. Please be kind. We upgraded our C-Beam to the C-Cbeam X-Large. I want to give special thanks to Moag and the OpenBuilds team for making this happen.
![SmoothiebrainZ CBeam Machine](https://openbuilds.com/data/article_images/l/4/4120.jpg?t=1479069744)
Build Author
Maxime Favre
Views
8512
SmoothiebrainZ CBeam Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modded Plate maker with: Smoothiebrainz board and DQ542MA SN04 Endstops Modded Z axis Aluminium build plate and renforced Y axis Dust shoe
KALΔIS OPEN SLA
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Modular easy to adjust scale of the entire build Tablet/LCD monitor SLA 3d Printer.
![BeTrue3D Printer](https://openbuilds.com/data/article_images/l/4/4306.jpg?t=1485199929)
Build Author
BeTrue3D
Views
20211
BeTrue3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
![CNC Control Box with VFD etc etc](https://openbuilds.com/data/article_images/l/4/4354.jpg?t=1486815770)
Build Author
Savvas
Views
16582
CNC Control Box with VFD etc etc
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
Adjustable Router Guide Template
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18194
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
Dragon Too Plasma Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A Benchtop Plasma Cutter Concept
C-Beam "2" XLarge CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam 2XL CNC Router
![Gantry Type CNC with Makita Router](https://openbuilds.com/data/article_images/l/5/5051.jpg?t=1494965871)
Build Author
Rick Holder
Views
13845
Gantry Type CNC with Makita Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.
![SLA (Resin) 3D Printer](https://openbuilds.com/data/article_images/l/5/5069.jpg?t=1497077723)
Build Author
mytechno3d
Views
23646
SLA (Resin) 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
SLA LCD 3D Printer ( 8.9'' LCD screen )
![Vacuum Forming Machine](https://openbuilds.com/data/article_images/l/5/5071.jpg?t=1495496199)
Build Author
rengelking
Views
29632
Vacuum Forming Machine
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Vacuum Former built with off-the-shelf parts, works perfectly every time!
![Build #2 - Bigger & Stronger](https://openbuilds.com/data/article_images/l/5/5402.jpg?t=1515568204)
Build Author
JWhitten
Views
12934
Build #2 - Bigger & Stronger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
![Halloumi CNC Machine - Acetal Plates](https://openbuilds.com/data/article_images/l/5/5480.jpg?t=1507532304)
Build Author
Savvas
Views
13315
Halloumi CNC Machine - Acetal Plates
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I built the original machine using plywood plates, and always intended to upgrade those parts to more durable ones. I decided to go with acetal as it's a lot easier to cut than aluminium. I used fusion 360 to model and rebuild the original machine. Once I have assembled everything and feel confident it all works I will release the plate designs here.
![DM C-Beam XXL Tank](https://openbuilds.com/data/article_images/l/5/5817.jpg?t=1509330303)
Build Author
dmasters
Views
7346
DM C-Beam XXL Tank
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 1000mm C-Beam XXL CNC with external drivers and high torque Nema 23 motors, 2.2KW Spindle with VFD.
![Joe Harris's all metal CNC Router build](https://openbuilds.com/data/article_images/l/5/5982.jpg?t=1512418579)
Build Author
Joerharris
Views
5761
Joe Harris's all metal CNC Router build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!
![CNC Greenland Paddle Carver build](https://openbuilds.com/data/article_images/l/6/6221.jpg?t=1516031671)
Build Author
Andre Cooke
Views
15123
CNC Greenland Paddle Carver build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC mill for carving / milling Greenland Paddles
![Opening into doors](https://openbuilds.com/data/article_images/l/6/6336.jpg?t=1517233364)
Build Author
ShockingTops
Views
3539
Opening into doors
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.
C-beam Machine - Modesty
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modified C-beam Machine. Taller (30 cm) C-beam uprights in gantry, and longer 750 mm frame in Y direction. XL gantry plate on X (and Z?). Y will have additional 700 mm SBR16 rails as extra support and slightly raised bed to fit above stepper motor. Approx. machinable area of 370 x 370 mm.
![Sphinx Evolution](https://openbuilds.com/data/article_images/l/6/6390.jpg?t=1520123783)
Build Author
Michael.M
Views
8417
Sphinx Evolution
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
![K40 ACRO Conversion](https://openbuilds.com/data/article_images/l/6/6592.jpg?t=1519876442)
Build Author
joetemus
Views
24375
K40 ACRO Conversion
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A K40 to ACRO Co2 laser cutter build. Designed and built to expand the work area of the K40
![Lab Power Supply + Soldering Station](https://openbuilds.com/data/article_images/l/6/6861.jpg?t=1521067862)
Build Author
uGen
Views
16994
Lab Power Supply + Soldering Station
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron
Draw bot core xy
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
In the design stage. Help guide.
![CoreXY - e3d inspired](https://openbuilds.com/data/article_images/l/7/7021.jpg?t=1525161852)
Build Author
j0achim
Views
11101
CoreXY - e3d inspired
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.
1000 x 1000 Workbee powered by X controller
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A standard 1000x1000 Workbee powered by an X-controller using a Hitachi router
Workbee with Duet controller
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Workbee 1010 with Duet controller from Ooznest
CNC Router Overhaul
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This will be a complete overhaul of this router with some cool modifications.
![Co2 Laser Cutter/Engraver Rotary Attachment](https://openbuilds.com/data/article_images/l/8/8239.jpg?t=1549271771)
Build Author
pedrofernandez
Views
16121
Co2 Laser Cutter/Engraver Rotary Attachment
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Vslot rail system at work again, laser cutter/engraver rotary device for cylindrical objects .
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)