Build List
-
Active Filters:
nc
LEAD Lathe
I have been toying with the idea of making a 3 axis rotary CNC machine for awhile. I wanted to make it with off the shelf OpenBuilds parts so any one can replicate it and I felt the LEAD High Z Mod would be a good starting point.
Build Author Retsaj Views 52242
Standalone Torch Height Controller for CNC Plasma Cutting
A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)
Rotary Axis OX Derivitive
A Rotary Axis CNC router based on the OX CNC Router
Build Author OpenBuilds Views 18147
BlackBox X32
The next level of CNC motion control solutions. Packed with advanced new features and built on the reliability of the proven BlackBox system
2 GANTRY CNC HOTWIRE MACHINE
A 2 independent gantry affordable hotwire machine.
Build Author Michael.M Views 35904
7050 Sphinx
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
Build Author Quentin Karmark Views 5753
Laguna Swift 4X4 CNC mill retrofitted with OpenBuilds
Used Laguna Swift 4X4 CNC mill with Water-cooled Spindle and RichAuto serial pendant retrofitted with OpenBuilds/Blackbox/Interface
Openbuilds 4x8 cnc
I built this cnc using 2 z axis actuators thinking it would minimize deflection and it seems to be very sturdy. I used 2 1500mm c channels for my x axis, 1 1500mm c channel for my y axis, nema 23 stepper motors, dm556 drivers, 2 24v power supplies, smc5-5-n-n controller, 9mm wide belts, and the Hitachi m12vc router. So far it's working very well with a few hiccups. Programming the controller was a learning experience but I'm very happy with it.
Build Author Mark Carew Views 19085
V-Slot™ Nema 23 Linear Actuator (Belt Driven)
This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts.
Build Author OpenBuilds Views 22751
INTERFACE CNC Touch Control System
Super cool standalone Human-Machine Interface for controlling your CNC machines!
Build Author StrictlyScale Views 6685
Lead1010 Build with Enclosure
First time CNC builder puts together a Lead1010 machine.
OpenBuilds LEAD CNC Machine 1515 (60" x 60")
It began with creating an extremely rigid axis that incorporates a multi C-Beam Linear Rail system as well as precision lead screws coupled with a tension system for the absolute maximum in performance.
Build Author EvanH Views 1053
"Hawk" Heavy-duty dual-Z pseudo C-Beam
A compact, strong machine with very high Z clearance, yet can still mill aluminium easily.
5'x10' CNC Plasma/Mill Table
Plasma Mill CNC
"Hirata scrap find" CNC
First CNC and first attempt at building one also, so yeah... good luck to me!
Build Author Mark Carew Views 73938
BlackBox Motion Control System
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
Build Author Mark Carew Views 57641
V-Slot NEMA 23 Linear Actuator (Lead Screw)
Learn to build a super strong nema 23 lead driven linear actuator
Build Author Kyo Views 22334
Sphinx 55
A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.
Build Author Spark Concepts Views 13367
CNC xPRO V4
Take your build to the next level with the CNC xPRO V4!
Build Author Troy Proffitt Views 23831
Sphinx Upgraded plates / ballscrews and linear rail
Upgraded Sphinx Cbeam using 3/8 aluminum plates and linear rails / ballscrews
Build Author Mark Carew Views 179477
LEAD CNC 1010 (40" x 40")
The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!
Build Author Ryan Lock Views 123665
WorkBee CNC Machine
The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.
Build Author Mark Carew Views 28636
High Z Mod for Lead CNC
The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.
LR/BS CNC Router
An easy to source/easy to build, yet quite robust CNC router. This design has not yet be implemented.
Build Author Ryan Lock Views 129318
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Heavy Metal
CNC Mill built for cutting metal.
Build Author Kyo Views 30719
Sphinx 1050
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
Salmon Sphinx 1.0
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
Build Author Suhmanda Views 2165
DIY CNC SPINDLE
CNC SPINDLE FOR DIY ROUTERS AND MILLING MACHINES ITSRS-985 MOTOR HAS MUCH BEFINITS THAN ANY OTHER DC MOTOR IN MARKET
Pneumatic cnc cutter with festo drive
CNC Glass cutter
CNC Cutter Knife
CNC knife cutter with loline blades
CNC Linear Slide for DIY project
Low cost cnc linear drive for making any xyz cnc structure
Plasma Table 006
Fast, inexpensive, near-zero maintenance, and 2+ years of near-daily use.
Build Author Mark Carew Views 252953
C-Beam® Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author Ryan155 Views 8828
RIGCNC
I made a mill from first principles because I didn't like any of the ones that were out there, More info can be found on the website RigCNC.com
Build Author that-jim Views 7163
Z-Axis Upgrade For My Sphinx
Z-Axis Upgrade For My Sphinx
Build Author that-jim Views 41473
LINEAR RAIL SPHINX 55 (Blue OX plates)
Machine based on Sphinx 55 built with linear rails.
Build Author Mark Carew Views 68585
OpenBuilds Workbee 1010 (40" x 40")
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
Magnetic CNC Dust Shoe with LED lights and Camera*
Making my own magnetic dust shoe with led lights and a camera. Showing my progress from beginning to now.
Build Author UltiBots Views 34432
UltiBots CB3030 CNC Router
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
Build Author Yanou Fishel Views 8283
Beefed up Minimill
A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.
Build Author Sigifredo Cruz Rojas Views 2714
ALl included interface
I have not too much space and need a portable solution, and tired of cleaning the electronics I decide to put everything inside a box and this is the result.
Denford CNC Resurrection
Denford CNC Mill Update
Build Author alex_b Views 16515
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
Build Author Mark Carew Views 207067
OpenBuilds ACRO System
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
Build Author OpenBuilds Views 24498
OpenBuilds Enclosure Series
Easy to build series of enclosures for all your CNC needs!
Build Author Spark Concepts Views 71617
CNC xPRO Driver
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
Build Author Mark Carew Views 1159004
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Fixed Gantry CNC Router
A fixed gantry router using OpenBuilds control and electronics.
3D printed Laser Engraver
i´ve designing this laser taking care of every part to be functional, This laser has Endstops mounts on the corners and the X axis both sides too. The corners has fasbelt tension knobs for easy operation. The laser mount has adjustable knob to manually rise or down the laser for focusing purpose. all the parts have been printed at 65% infill a 2 perimeter lines just to make the parts stronger. Attached you will find a part list with quantity and link where to buy. SIZE 1mts x 75cm Built area
CNC built, work in progress, fail
2x4 cutting area, enclosed with dust collection mainly built out of wood.
Fixed Gantry Easy Assembly
Fixed Gantry CNC with good accuracy and rigidity but for a higher price than the usual CNC's on the site.
Build Author Jasont Views 2526
MY first CNC build
my first cnc build using the lead 1010 to build bigger and better!!
2 Axis Lathe cutter
Rubber company use as a lathe cutter for accurate cuts compared to hand cutting.
Build Author Rick 2.0 Views 14687
C-Beam Mini Mite
A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.
Dragon Portable CNC Plasma Cutter
A small portable CNC Plasma Cutter with some unique features
Build Author ahayden Views 25001
C-Beam Prefab Untitled
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
C-beam charmer
Double C-beam Y axis 500mm., Double 2080 X axis 600mm. , C-beam Z axis 250mm, TB-6600 drivers, MKS-DLC32v2 GRBL w/wi-fi and blue tooth
Build Author mytechno3d Views 12856
Z FLoating head for Plasma cutting (OX CNC compatible)
How to convert your OX CNC to a plasma cutter at low cost
Build Author Ahmed Ibrahim Views 6517
Cairo Mini 3d-Printer
We are introducing the Cairo Mini 3d-printer! It’s a DIY fully Open-source Reproducible 20x20cm 3d-printer. The original goal of the Cairo Mini 3d-printer is to create a low-cost 3d-printer below 220$(3500 LE). That anyone can build with ease.
Build Author Leonard Cross Views 33692
Workbee CNC Router/Laser/Plotter
A CNC machine with an expansive 30x30" work area, supporing a router, laser, simple plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.
Build Author blterry1 Views 16376
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
DIY CNC Machine
In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.
Build Author Scott Martinez Views 10134
The Growler
This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.
Build Author Serge E. Views 58927
myOX : a 4' x 2' OX CNC with potential
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Homemade CNC
This started as an attempt to learn to weld and quickly took on a life of its own.
Ooznest Ox with 3D Printed Gantry Plates
Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.
The RAT. A form ply and aluminium hybrid.
A hybrid of form ply and aluminium. 835x1260x100mm working envelope.
Build Author Frank Gore Views 7203
Kossel Extreme
A custom Delta printer for large projects with any filament that still retains speed and accuracy, all within a 15 amp/110VAC power budget. Based on Johann's Mini Kossel design.
ME - Laser CNC
Build of a small laser engraver using V-slot profiles and 3d printed parts
Mini lathe CNC Conversion - Work in progress
My on going build of CNC Mini Lathe
M10CUBE PICO CNC. A Universal Controller
An attempt is to be a Unified Modular Controller based on M10CUBE platform. For GRBLHAL and MARLINHAL applications. HAL porting is under way 1 - WIZnet Pico Clone W5100S-EVB-Pico 2 v- 6 X StepStick. Not sure about the sixth driver, (Pico pins limitation) . External connectors for larger drivers 3 - Opto - isolated spindle PWM. 4 - HMI 5 - I/O on diferent modules and Ethernet 10MBPS communication. Patches will be written to GRBLHAL for Ethernet I/Os (Interrupted).
Build Author Savvas Views 18100
C-Beam Lead Screw CNC Mountain
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
Build Author T4Concepts Views 70908
WorkBee CNC build - My honest opinion, tips and help
My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.
Build Author Shaun Weitzel Views 4752
OpenBuilds Lead 1515
First build of a Lead 1515!
Robo Morten
A horizontal-router CNC using openbuilds parts geared toward routing out mortise and tenon joinery; or any other end grain work on wood.
Build Author Keith Davis Views 8380
Upgrading Your 3D Printer With Synchronous Leveling
Upgrading printers for Synchronous Leveling
Build Author Robert Hummel Views 149381
Laser V
With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products
Build Author shanehooper Views 12396
SolidCore CoreXY 3D Printer
Modular and Scalable CoreXY Printer with all metal parts.
Build Author Michael.M Views 60860
GRANITE 1.0
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
Build Author crypt-tek Views 32212
C3DO
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
Build Author Mike Campbell Views 9131
bor 454-D
A large format, modular, rack and pinion build designed around OpenBuilds components.
Build Author Damian V-SLOT Poland Views 11160
Router Sled V1.1 V-SLOT
We want to present you the new design of the device which is Router Sled. The whole structure is made of aluminum elements and ensures good quality of the device. We used V-SLOT aluminum profiles and OpenBuilds accessories for the construction. The instructional video can be found on our YouTube channel (subtitles in English soon)
Prototype Rack-n-Pinion 4'x8'
This is a custom gear rack drive machine with a 4'x8' cut capacity.
Build Author Keith Davis Views 28733
OpenXY
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
Build Author Mark Carew Views 140610
OpenBuilds MiniMill
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
Build Author Gary Caruso Views 1769
OpenPull From CNC Kitchen.. attempt
This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.
OB Lead 1515 CNC Router 2021
Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.
PnP 4 axis small/fast machine
You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.
Home made CNC Plasma Cutter
Not completed yet but it does work, I will be changing small things as I finish the build and I have learned a lot from this build I am looking forward to finishing this one and Building another maybe larger table.
Build Author Mark Carew Views 76754
OpenBuilds Workbee 1510 (60" x 40")
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
Build Author Steve Hall Views 3038
Cartesian Style Build UK
Another Cartesian style build with parts from the UK, US & China.
Lead 1510
Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring. Powered by xPro v5 & CNC.js
Build Author Johnny Reich Views 1028
ProLight 1000 Mill Retrofit
Update a 20-year old bench top milling machine with OpenBuild Ecosystem electronics.
Build Author txcomp Views 5663
WorkBee 1010 "Get Rid of the Slop" Build
My goals for this build were to eliminate slop and flex while also allowing easy serviceability.
Build Author evil2002usna Views 10418
Evil Ox
Cheap Ballscrew Ox CNC Router.
An other Ox Metal Build AZ
Had left over parts from cnc plasma build.
DIY Vacuum Hold Down table
A simple vacuum hold down/clamp set up using a 6hp canister vacuum.
C-BEAM-GTC
Building a larger C-BEAM CNC Machine with no previous experience.
Fastmill CNC
Very cheap CNC made from laser fired and bent parts.