Ok...... now what? Wired up new box per video for workbee 1510 had power to Y and Z. Shut down computer for a while and restarted it. Selected FTDI USB to Serial COM5 Picked Connect .....and nothing happening; will not let me select anything. I am really getting frustrated fought the Xpro V4 for a month now this with the Blackbox. [18:18:54] [ 3D Viewer ] WebGL Support found! success: this application will work optimally on this device! [18:18:54] [ Websocket ] Bidirectional Websocket Interface Started [18:18:55] [ update ] Checking for Updates [18:18:55] [ update ] You are already running OpenBuilds CONTROL 1.0.246 [18:19:27] [ connect ] PORT INFO: Port is now open: COM5 - Attempting to detect Firmware [18:19:27] [ connect ] Checking for firmware on COM5 [18:19:27] [ connect ] Detecting Firmware: Method 1 (Autoreset) [18:19:28] [ connect ] Detecting Firmware: Method 2 (Ctrl+X) [18:19:29] [ connect ] Detecting Firmware: Method 3 (others that are not supported) [18:19:31] [ connect ] ERROR!: No supported firmware detected - you need a controller with Grbl 1.1x on it, or there is a problem with your controller. Closing port COM5 [18:19:31] [ disconnect ] PORT INFO: Port closed