Welcome to Our Community

Some features disabled for guests. Register Today.

K40 Laser Build (Major Changes)

Discussion in 'Laser Cutters' started by Superslinky, Nov 8, 2017.

  1. Superslinky

    Builder

    Joined:
    Nov 13, 2016
    Messages:
    6
    Likes Received:
    13
  2. Ariel Yahni

    Ariel Yahni OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Oct 22, 2015
    Messages:
    144
    Likes Received:
    496
    Very interesting build. What you actual max cut size?
     
  3. Superslinky

    Builder

    Joined:
    Nov 13, 2016
    Messages:
    6
    Likes Received:
    13
    I don't know yet. I'm going to start firing things up this weekend. I'm not sure if the laser will loose so much power that it won't cut in the furthest corners or not. During the mirror alignment process I could easily pierce a hole at all 4 corners but we'll see.
     
  4. Ariel Yahni

    Ariel Yahni OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Oct 22, 2015
    Messages:
    144
    Likes Received:
    496
    You should not loose any power if you have a good alignment. :)
     
  5. ErikE

    ErikE New
    Builder

    Joined:
    Feb 21, 2017
    Messages:
    1
    Likes Received:
    2
    Hi!, I can chime in a little here. I have replaced the standard controller to a Cohesion3D board (direct drop in and Smoothie compatible). There are various software solutions that work with it eg. Laserweb. You could keep the standard board (if it's a m2nano) and use K40 Whisperer . So.. there are choices :) and it's easy..
     
    Superslinky and Retrosmith like this.
  6. greengoatman

    Builder

    Joined:
    Aug 23, 2016
    Messages:
    2
    Likes Received:
    1
    Can you post a picture or explanation of how you accomplished the z axis?
     
  7. jwarren

    jwarren New
    Builder

    Joined:
    Jul 25, 2016
    Messages:
    1
    Likes Received:
    0
    Can you upload the stl's for your printed parts?
     
  8. Superslinky

    Builder

    Joined:
    Nov 13, 2016
    Messages:
    6
    Likes Received:
    13
    I use a smoothieware controller. It works really well. The software I use is Adobe cs straight to laserweb. Look them both up. They are the best open source combination out there.
     
    DA98520 likes this.
  9. Superslinky

    Builder

    Joined:
    Nov 13, 2016
    Messages:
    6
    Likes Received:
    13
    I've considered this idea as well. There are a few issues though. As far as mounting the tube on the spindle, you'd end up with a large mass that would be difficult to keep stable. The tube is 700 mm long so all of that would be moving around. But as far as gutting the machine, that is what I did first.
     
  10. Superslinky

    Builder

    Joined:
    Nov 13, 2016
    Messages:
    6
    Likes Received:
    13
    Here's a closeup picture but most of this is documented in my 3d model.
     

    Attached Files:

  11. Dave Crevier

    Builder

    Joined:
    Aug 1, 2021
    Messages:
    1
    Likes Received:
    0
    This is pretty close to what I was planning on doing. The thing I was wondering about is are you not scared about the melamine catching fire?....I was thinking about covering the inside with like 24ga. Sheet metal. Have you've had any issues?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice