Build List
-
Active Filters:
ar
![Voxel OX - Extendable 3D Printer and CNC Platform](https://openbuilds.com/data/article_images/l/5/5080.jpg?t=1489276945)
Build Author
Marshall Peck
Views
79114
Voxel OX - Extendable 3D Printer and CNC Platform
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An open source 3D printer design with a sturdy V-Slot frame
![C-Bot](https://openbuilds.com/data/article_images/l/1/1146.jpg?t=1456323895)
Build Author
Carl Feniak
Views
278410
C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
C-Beam Machine XLarge
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
A rigid and wide format, plate and carving CNC.
![Linear Rail CNC Machines](https://openbuilds.com/data/article_images/l/1/1771.jpg?t=1428529929)
Build Author
sgspenceley
Views
184436
Linear Rail CNC Machines
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A CNC build using linear rails & lead screws.
![The Beeline CNC](https://openbuilds.com/data/article_images/l/6/6656.jpg?t=1519854542)
Build Author
blterry1
Views
16505
The Beeline CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Here are the instructions to build the Beeline custom CNC router table.
![LayerFused X301 - CoreXY Large Volume Printer](https://openbuilds.com/data/article_images/l/9/9491.jpg?t=1598379323)
Build Author
Robert Mech
Views
7796
LayerFused X301 - CoreXY Large Volume Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.
![OX Based cnc 3000 x 1500 Double belt](https://openbuilds.com/data/article_images/l/4/4037.jpg?t=1476802440)
Build Author
sebf34
Views
30471
OX Based cnc 3000 x 1500 Double belt
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX Based CNC
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
23099
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
![C3DO](https://openbuilds.com/data/article_images/l/5/5957.jpg?t=1511666318)
Build Author
crypt-tek
Views
32321
C3DO
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
![Prusa i3 Bear Upgrade V2](https://openbuilds.com/data/article_images/l/6/6428.jpg?t=1519671067)
Build Author
pek
Views
77577
Prusa i3 Bear Upgrade V2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer
![Dash-X 3D Printer: Innovative design](https://openbuilds.com/data/article_images/l/8/8551.jpg?t=1558461111)
Build Author
Neil Rosenberg
Views
35703
Dash-X 3D Printer: Innovative design
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cross-beam Cartesian 3d printer with dual master/slave lightweight fiberglass drive shafts, BMG style extruder with Bowden (Capricorn) tubing. Hot end is Creality Ender 3 style with two fans and BLTouch for autoleveling. Filament runout sensor is also included.
![V-Slot® NEMA 17 Linear Actuator (Belt Driven)](https://openbuilds.com/data/article_images/l/0/80.jpg?t=1444071466)
Build Author
Mark Carew
Views
120072
V-Slot® NEMA 17 Linear Actuator (Belt Driven)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
Rotary Axis OX Derivitive
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
A Rotary Axis CNC router based on the OX CNC Router
![C-Beam Prefab Untitled](https://openbuilds.com/data/article_images/l/3/3986.jpg?t=1474752615)
Build Author
ahayden
Views
25131
C-Beam Prefab Untitled
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
![A simple XY laser engraver/cutter](https://openbuilds.com/data/article_images/l/4/4034.jpg?t=1487416994)
Build Author
HPB
Views
40461
A simple XY laser engraver/cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
![The Archon R2](https://openbuilds.com/data/article_images/l/6/6643.jpg?t=1519678156)
Build Author
Sword66
Views
9874
The Archon R2
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Archon "In the style of Cartesian movement." A brief overview, guide and summary of my highly experimental build. and some insight into the challenges of building such a large format/belted machine.
![V-Slot™ X -Y Stage Hidden Acme Rod Example](https://openbuilds.com/data/article_images/l/0/66.jpg?t=1389473440)
Build Author
Mark Carew
Views
51452
V-Slot™ X -Y Stage Hidden Acme Rod Example
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
![RepRap Tuga](https://openbuilds.com/data/article_images/l/0/390.jpg?t=1389473261)
Build Author
pdesigns
Views
27672
RepRap Tuga
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a work in progress(not printing yet). Expect this instructions to grow with time, but for now it is mainly interesting for those who want to take part in developing this printer.
Software speed control of a brushless dc (Bldc) motor from Mach3.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.
![FRANKINATOR -- My CNC Router Built Around The C-Beam Rail](https://openbuilds.com/data/article_images/l/2/2370.jpg?t=1454334800)
Build Author
Robert Bailey
Views
28145
FRANKINATOR -- My CNC Router Built Around The C-Beam Rail
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a TinyG to run it. where I work I have Hardware, Software and Mechanical engineers and they all got sucked into my project. they want one to do prototyping at the office, once they see mine...
![RONIN OX | The G10/Carbon Fiber Hogger](https://openbuilds.com/data/article_images/l/2/2876.jpg?t=1447906012)
Build Author
alex_b
Views
14210
RONIN OX | The G10/Carbon Fiber Hogger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
![](https://openbuilds.com/data/article_images/l/3/3890.jpg?t=1480251471)
Build Author
Glenn Weston
Views
16744
"The Moagie Mill" My C-Beam XLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My Experiences building the C-Beam X Large. Maybe you can pick up a few pointers from my ramblings and experiences if you are considering building this machine.
![The Floating Dust Shoe](https://openbuilds.com/data/article_images/l/6/6237.jpg?t=1516176994)
Build Author
Eric Jacobsson
Views
13130
The Floating Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
![Naomi Wu's Automatic Bartender- BarBot!](https://openbuilds.com/data/article_images/l/6/6597.jpg?t=1519192094)
Build Author
Naomi Wu
Views
9069
Naomi Wu's Automatic Bartender- BarBot!
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
![Rack and Pinion (Death to Belts)](https://openbuilds.com/data/article_images/l/8/8022.jpg?t=1544392867)
Build Author
Joe Young
Views
11426
Rack and Pinion (Death to Belts)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Low profile rack and pinion linear actuator design
![V-Slot Modular Sit/Stand Desk](https://openbuilds.com/data/article_images/l/1/1615.jpg?t=1421190050)
Build Author
Mark Carew
Views
17460
V-Slot Modular Sit/Stand Desk
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
![TACIT RONIN CNC - Flood Coolant Enabled C-Beam](https://openbuilds.com/data/article_images/l/3/3396.jpg?t=1463500781)
Build Author
alex_b
Views
16656
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
HD CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy Duty build with 1605 Ballscrew and Linear Rail
![Rob's C-Beam Machine XLarge](https://openbuilds.com/data/article_images/l/6/6456.jpg?t=1518301955)
Build Author
Rob Mahan
Views
11629
Rob's C-Beam Machine XLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
![Spartacus Inspire](https://openbuilds.com/data/article_images/l/6/6670.jpg?t=1519708480)
Build Author
MarkM_NJ
Views
18659
Spartacus Inspire
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.
![bor 454-D](https://openbuilds.com/data/article_images/l/9/9915.jpg?t=1619635519)
Build Author
Mike Campbell
Views
9244
bor 454-D
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A large format, modular, rack and pinion build designed around OpenBuilds components.
![X Y Table OpenRail / V-Slot Build Examples](https://openbuilds.com/data/article_images/l/0/62.jpg?t=1389473342)
Build Author
Mark Carew
Views
67714
X Y Table OpenRail / V-Slot Build Examples
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
![DSLR Video Slider](https://openbuilds.com/data/article_images/l/0/535.jpg?t=1409501345)
Build Author
Rob Taylor
Views
24789
DSLR Video Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.
3000x1500 CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Here is my Project A CNC 3000 mm by 1500 mm, with a 2.2kW spindle collet ER25 and 4 stepper motor nema 23 425oz-in. The purpose being to have a large work surface for a minimum cost.
![Niko’s Egg-painter robot (OpenBuilds)](https://openbuilds.com/data/article_images/l/1/1953.jpg?t=1427845771)
Build Author
gianakop
Views
43839
Niko’s Egg-painter robot (OpenBuilds)
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
This EggBot design has a perfect functionality (the same as the original EggBot professional), a perfect cable and microcontroller arrangement, and a perfect cost as it uses a minimum list of parts (with one V-Slot Linear Rail size20mm x 80mm and length 500mm you can build 3 EggBots!)
![UltiFaker 2 Go](https://openbuilds.com/data/article_images/l/3/3141.jpg?t=1458585991)
Build Author
PaulS
Views
19469
UltiFaker 2 Go
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.
![OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative](https://openbuilds.com/data/article_images/l/3/3585.jpg?t=1466530123)
Build Author
Julius
Views
23709
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
![BF3D OX (Big Freakin' 3D OX)](https://openbuilds.com/data/article_images/l/4/4498.jpg?t=1496452101)
Build Author
Bud Griffin
Views
10618
BF3D OX (Big Freakin' 3D OX)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is my latest printer build. The second printer I've built using V-Slot.
![The Plastic Beast CoreXY Printer](https://openbuilds.com/data/article_images/l/6/6698.jpg?t=1519785516)
Build Author
cdsmith12
Views
25052
The Plastic Beast CoreXY Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
In my opinion, this is the easiest and most complete tutorial to walk you through building a large platform 3D printer and the Sketchup File is included for you to make any changes needed.. The Plastic Beast is a CoreXY Printer with a build platform of 440mm square. You can print 600mm or about 23 inches diagonal. Any level of user from novice to expert should gain something from my tutorial.
![LEAD CNC 1010 (40](https://openbuilds.com/data/article_images/l/7/7832.jpg?t=1543351749)
Build Author
Mark Carew
Views
180855
LEAD CNC 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!
![1510 Workbee Modified](https://openbuilds.com/data/article_images/l/7/7967.jpg?t=1548191941)
Build Author
Jacob Lotter
Views
22184
1510 Workbee Modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
![Simple Cnc System (arduino Grbl)](https://openbuilds.com/data/article_images/l/8/8474.jpg?t=1556544699)
Build Author
viktop
Views
21174
Simple Cnc System (arduino Grbl)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
![Router / plasma cutting table ( Rack and pinion )](https://openbuilds.com/data/article_images/l/8/8838.jpg?t=1572632620)
Build Author
mytechno3d
Views
24348
Router / plasma cutting table ( Rack and pinion )
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy DIY plasma cutting table
Camera slider for stacking focus
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is just a small project to get use to the OpenBuild products.
![myOX : a 4' x 2' OX CNC with potential](https://openbuilds.com/data/article_images/l/0/915.jpg?t=1458009996)
Build Author
Serge E.
Views
59063
myOX : a 4' x 2' OX CNC with potential
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
![YAOP (Yet Another Openbuilds Printer)](https://openbuilds.com/data/article_images/l/1/1493.jpg?t=1418414947)
Build Author
winand
Views
15619
YAOP (Yet Another Openbuilds Printer)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Yet Another Openbuilds Printer, my version :-P
![V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES](https://openbuilds.com/data/article_images/l/1/1949.jpg?t=1433097153)
Build Author
Darren Ditto
Views
9480
V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint
![CNC Router Lathe](https://openbuilds.com/data/article_images/l/2/2145.jpg?t=1466800036)
Build Author
Rakmup
Views
39549
CNC Router Lathe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.
GrOX (OX based router)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 1500mm OX router using Openbuilds parts and plates by Chris Laidlaw
![MakerSL MSL-5 Cantilevered 3D Printer](https://openbuilds.com/data/article_images/l/3/3179.jpg?t=1466722048)
Build Author
Sonny Lowe
Views
29730
MakerSL MSL-5 Cantilevered 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
![CNC Control Box with VFD etc etc](https://openbuilds.com/data/article_images/l/4/4354.jpg?t=1486815770)
Build Author
Savvas
Views
16585
CNC Control Box with VFD etc etc
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18194
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
![Gantry Type CNC with Makita Router](https://openbuilds.com/data/article_images/l/5/5051.jpg?t=1494965871)
Build Author
Rick Holder
Views
13845
Gantry Type CNC with Makita Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.
![Build #2 - Bigger & Stronger](https://openbuilds.com/data/article_images/l/5/5402.jpg?t=1515568204)
Build Author
JWhitten
Views
12937
Build #2 - Bigger & Stronger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
![Joe Harris's all metal CNC Router build](https://openbuilds.com/data/article_images/l/5/5982.jpg?t=1512418579)
Build Author
Joerharris
Views
5761
Joe Harris's all metal CNC Router build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!
![Sphinx Evolution](https://openbuilds.com/data/article_images/l/6/6390.jpg?t=1520123783)
Build Author
Michael.M
Views
8417
Sphinx Evolution
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
1000 x 1000 Workbee powered by X controller
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A standard 1000x1000 Workbee powered by an X-controller using a Hitachi router
Laser Rotary Tool / Attachment
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Rotary attachment to engrave cylindrical objects on laser machines
Gary's Mod Plates for OX Heavy Duty X and Z
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Gary's take on the OX HD X and Z plates, making it stiffer, adding mini wheels to the C-beam and Quick removable Z axis.
![40x40 V-Slot Rod Type Linear Actuator](https://openbuilds.com/data/article_images/l/9/9196.jpg?t=1581687266)
Build Author
Martin.Barfoed
Views
5121
40x40 V-Slot Rod Type Linear Actuator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
A Rod-type Linear Actuator based on the 40x40 V-slot profile
![Paintbot painting cnc](https://openbuilds.com/data/article_images/l/9/9266.jpg?t=1584976841)
Build Author
Alexander Leiser
Views
13289
Paintbot painting cnc
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
Custom painting machine in designed and wrote the software for. Paintings are with acrylic color on canvas
![LINEAR RAIL SPHINX 55 (Blue OX plates)](https://openbuilds.com/data/article_images/l/9/9317.jpg?t=1588456683)
Build Author
that-jim
Views
41853
LINEAR RAIL SPHINX 55 (Blue OX plates)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Machine based on Sphinx 55 built with linear rails.
![A custom arcade](https://openbuilds.com/data/article_images/l/9/9379.jpg?t=1592581616)
Build Author
ajdubs
Views
3530
A custom arcade
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is an arcade "cabinet" of sorts built almost entirely from OpenBuilds extrusions. Save for a few 3d printed parts, the electrical components, the acrylic panels, and the monitor mount, every component was purchased from the OpenBuilds part store.
My Lead 1010
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a fully loaded Lead 1010 and located in a shed measuring 3 by 2.50 meters. Here i build my guiyats by hand and the help of my Openbuilds friend! Pure for hobby.
![MDF Delta](https://openbuilds.com/data/article_images/l/0/692.jpg?t=1398125258)
Build Author
nicklogan
Views
15313
MDF Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Rostock style delta bot with the parts which are typically 3D printed made from medium density fiberboard (MDF). It uses a home made hot end.
![CubeSpawn Ultimaker 3D Printer Module](https://openbuilds.com/data/article_images/l/0/782.jpg?t=1401285394)
Build Author
CubeSpawn
Views
18435
CubeSpawn Ultimaker 3D Printer Module
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker
Ox with Gecko Controller and CNC Linux
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux
Controll Board for CNC Projects
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Echinus Team change the Firmware from "Teacup" to "Marlin". I use this board in my 3D Printer and it works very good! So I write a short report.
![OXBear](https://openbuilds.com/data/article_images/l/1/1056.jpg?t=1441332255)
Build Author
Bear
Views
9947
OXBear
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
ANOTHER OX!~ Huge Thanks to Marc Carew and Open Builds. The primary reason I am building this CNC mill is to aid in my homemade snowboard creation. I am going to try and document as much of everything as I can and post it here to help others going a similar route. I know from past projects that taking the time to document each step can be tedious when you want to charge ahead but I will try! I hoping to get feedback on my design choices and set up as I am a complete newbie to CNC.
![Babe - The Big Blue (Laser) OX Build](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
DiggerJ
Views
7729
Babe - The Big Blue (Laser) OX Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1000 x 1500 OX build with the ability to router cut dovetails as well as laser engraving and light cutting.
The Buffalo
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX 1500 x 1000 mm
![1000mm X 1500mm OX CNC -- Fiber/Garolite](https://openbuilds.com/data/article_images/l/1/1289.jpg?t=1414951188)
Build Author
SlyClockWerkz
Views
15747
1000mm X 1500mm OX CNC -- Fiber/Garolite
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building the full size OX.
![V-Slot Cutting System](https://openbuilds.com/data/article_images/l/2/2138.jpg?t=1431475871)
Build Author
Kyo
Views
11237
V-Slot Cutting System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A System of 3d printed parts to use along with your projects aluminum extrusion to cut your pieces of v-slot to length manually.
![OneZ](https://openbuilds.com/data/article_images/l/2/2278.jpg?t=1439834998)
Build Author
Keith Davis
Views
16425
OneZ
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.
![the STD](https://openbuilds.com/data/article_images/l/2/2800.jpg?t=1446020246)
Build Author
Sam Dobbie
Views
6699
the STD
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A fully aluminium printer made from off the shelf components, no printed parts.
![Folger-Tech Y-Carriage](https://openbuilds.com/data/article_images/l/2/2848.jpg?t=1448208474)
Build Author
Sonny Lowe
Views
9817
Folger-Tech Y-Carriage
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This a redesign of the Folger-Tech Y-Carriage using the Solid V-Wheels, Ball Bearings, the V-Slot Rail System.
Rex
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build is inspired by the Lulzbot Taz printers and makes use of the new OpenBuilds C-Beam
Voxel OX Based Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
Building upon the great work done by Marshall Peck and others. I have started a new build.
Arctic Ox CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a cartesian CNC Router build that is based off the OX CNC build by Mark Carew. I am using Spark Concepts CNC xPro controller board and their 400w spindle kit.
![Pong CNC](https://openbuilds.com/data/article_images/l/3/3425.jpg?t=1462357169)
Build Author
Gerrald
Views
4766
Pong CNC
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)
![Archer - An extendable all metal 3D printer](https://openbuilds.com/data/article_images/l/3/3539.jpg?t=1468604303)
Build Author
James Archer
Views
12231
Archer - An extendable all metal 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
![Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)](https://openbuilds.com/data/article_images/l/3/3576.jpg?t=1466396648)
Build Author
Tim Pierce
Views
12519
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
![X-carve upgrade](https://openbuilds.com/data/article_images/l/3/3881.jpg?t=1471969620)
Build Author
Joe Garritano
Views
9817
X-carve upgrade
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Using criticall OpenBuilds components to upgrade the rigidity and reliability of an X-Carve 1000mm build.
![SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer](https://openbuilds.com/data/article_images/l/4/4275.jpg?t=1483369813)
Build Author
Venturebit
Views
10545
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
Kool Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Mid range build.
InDoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Large CoreXY build that can just barely get in through a doorway, aiming for under $1000. Build Volume approximately 18in x 24in x 26in.
![My little monster](https://openbuilds.com/data/article_images/l/4/4942.jpg?t=1492733760)
Build Author
J-Wahl Dezign
Views
10152
My little monster
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Modified Tevo
ZANTRY CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC Based on CBeam, with No custom Plates, and Z GANTRY
V-Slot Linear Actuator Bundle
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
v-slot linear actuator build.
![PhlatPrinter MK 3](https://openbuilds.com/data/article_images/l/5/5207.jpg?t=1497557010)
Build Author
Mark Carew
Views
32538
PhlatPrinter MK 3
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.
![Sphinx XL/R7](https://openbuilds.com/data/article_images/l/5/5224.jpg?t=1497737989)
Build Author
Hisha
Views
7917
Sphinx XL/R7
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1000mm x 1000mm Sphinx/R7 build.
![MiniMill Smoothie](https://openbuilds.com/data/article_images/l/5/5293.jpg?t=1503798101)
Build Author
Andrew Helsel
Views
11030
MiniMill Smoothie
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
MiniMill with DW611 and SmoothieBoard 4x v1.1
![Small C-Beam Plate Maker With Remote Login & Operation](https://openbuilds.com/data/article_images/l/5/5443.jpg?t=1503117835)
Build Author
DaveStewart
Views
5136
Small C-Beam Plate Maker With Remote Login & Operation
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam Plate cutter with Raspberry Pi V3, Arduino Mega2560 and Camera. Remote login & operation via SSH with cnc.js server, mjpg server on the Pi.
c-beam XLarge with ZLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
XLarge with ZLarge
![Prusa i3 Bear Half Upgrade v1.0](https://openbuilds.com/data/article_images/l/5/5661.jpg?t=1510508277)
Build Author
pek
Views
24511
Prusa i3 Bear Half Upgrade v1.0
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stronger frame for Prusa i3 MK2 / MK2s / MK2.5 3D printer
![K40 Laser Build (Major Changes)](https://openbuilds.com/data/article_images/l/5/5867.jpg?t=1510191534)
Build Author
Superslinky
Views
8644
K40 Laser Build (Major Changes)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Major K40 Laser Mod
![Modular DIY CNC Machine](https://openbuilds.com/data/article_images/l/6/6140.jpg?t=1516590691)
Build Author
jtaggard
Views
32598
Modular DIY CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.
![(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in](https://openbuilds.com/data/article_images/l/6/6205.jpg?t=1515766125)
Build Author
nc3dpw
Views
20733
(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.
Hybrid shapeoko Xcarve cnc router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My scratch build using shapeoko, xcarve, and custom parts.
![CNC-machine 650by700](https://openbuilds.com/data/article_images/l/6/6370.jpg?t=1517742220)
Build Author
Carl Siren
Views
6382
CNC-machine 650by700
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)