Welcome to Our Community

Some features disabled for guests. Register Today.

Success!

Discussion in 'CNC Mills/Routers' started by leversole, Dec 5, 2015.

  1. leversole

    leversole Journeyman
    Builder

    Joined:
    Nov 1, 2015
    Messages:
    77
    Likes Received:
    14
    I am a long way from being finished mith my Ox clone...but I made this today, the first finished part with no issues! I will start a build thread soom...
    IMG_3380.JPG
     
  2. ChadRat6458

    ChadRat6458 Journeyman
    Builder

    Joined:
    Dec 10, 2014
    Messages:
    59
    Likes Received:
    17
    That is great. It is a great feeling when you get it all dialed in. Finally got mine working right yesterday. I felt like I score a touchdown. I used f-engrave for this.
    20151206_191644.jpg
     
    bunty and Mark Carew like this.
  3. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    1,938
    Likes Received:
    1,110
    Well done @leversole and @ChadRat6458 congratulations! :thumbsup:
     
  4. ChadRat6458

    ChadRat6458 Journeyman
    Builder

    Joined:
    Dec 10, 2014
    Messages:
    59
    Likes Received:
    17
    leversole what software did you use?
     
  5. leversole

    leversole Journeyman
    Builder

    Joined:
    Nov 1, 2015
    Messages:
    77
    Likes Received:
    14
    I used CamBam to draw the sign and Chilipeppr to send to TinyG...
     
  6. ChadRat6458

    ChadRat6458 Journeyman
    Builder

    Joined:
    Dec 10, 2014
    Messages:
    59
    Likes Received:
    17
    Did you use the v-carve plug in for the letters? I need to find the time to play with cambam more.
     
  7. leversole

    leversole Journeyman
    Builder

    Joined:
    Nov 1, 2015
    Messages:
    77
    Likes Received:
    14
    Yes, used v-Carve plug in....loved CamBam..BUT...I spent an hour or two with VCarve and fell for it! It does SO MUCH more than CamBam, but with a price, no matter, spent the last couple of days running it thru its paces, I am a big VCarve fan now!
     

Share This Page