Welcome to Our Community

Some features disabled for guests. Register Today.

Spindle Mount Adapter 71mm to 65mm Needed

Discussion in 'Share Parts' started by Paul Stoller, May 26, 2017.

  1. Paul Stoller

    Paul Stoller Veteran
    Builder

    Joined:
    Feb 28, 2016
    Messages:
    59
    Likes Received:
    53
    OpenBuilds Router/Spindle Mount Adapter (71mm to 65mm) Needed

    Good afternoon All,

    I wanted to put a post out there to see if anyone on the forums would be willing to print out one of these adapters for me. I'm willing to pay a fair price for the part. Please PM me if anyone is able/interested.

    Thanks everyone!
     
    #1 Paul Stoller, May 26, 2017
    Last edited: May 26, 2017
  2. Kyo

    Kyo Master
    Staff Member Resident Builder Builder

    Joined:
    Feb 27, 2014
    Messages:
    613
    Likes Received:
    524
    Hey Paul,
    I am happy to print this out for you. Will shoot you a email with my paypal email. Just cover shipping and we are good :thumbsup:
     
    Paul Stoller likes this.
  3. Paul Stoller

    Paul Stoller Veteran
    Builder

    Joined:
    Feb 28, 2016
    Messages:
    59
    Likes Received:
    53
    Fantastic!, thank you for the assist!
     
  4. Kyo

    Kyo Master
    Staff Member Resident Builder Builder

    Joined:
    Feb 27, 2014
    Messages:
    613
    Likes Received:
    524
    No problem, Print just finished. ABS, 100% Solid infill. Should be in the post asap. :thumbsup:

    Adapter_Ring.jpg
     
  5. Paul Stoller

    Paul Stoller Veteran
    Builder

    Joined:
    Feb 28, 2016
    Messages:
    59
    Likes Received:
    53
    That looks great, thank you again sir!
     
  6. Srednasoft

    Srednasoft Well-Known
    Builder

    Joined:
    Jul 24, 2017
    Messages:
    4
    Likes Received:
    1
    Hi @Paul Stoller,

    Did the adapter from 71mm - 65mm work ok?
    I have the need for the same thing for my 65mm Makita router.
     
  7. WildBill

    WildBill Veteran
    Builder

    Joined:
    Feb 4, 2017
    Messages:
    38
    Likes Received:
    30
    I can't speak for the gentleman above, but I have printed several
    and they have work with not problems with both a spindle and the Makita router.
     
    Srednasoft likes this.
  8. Paul Stoller

    Paul Stoller Veteran
    Builder

    Joined:
    Feb 28, 2016
    Messages:
    59
    Likes Received:
    53
    Sorry for the delayed response, I have had zero issues with the printed mount. It is very solid and have no problems recommending it.
     
    Mark Carew and Srednasoft like this.
  9. Srednasoft

    Srednasoft Well-Known
    Builder

    Joined:
    Jul 24, 2017
    Messages:
    4
    Likes Received:
    1
    Thnx for the reply. :)
     

Share This Page

  • About Us

    The OpenBuilds Team is dedicated helping you to Dream it - Build it - Share it! Collaborate on our forums and be sure to visit the Part Store for all your Maker needs.


    [email protected]

  • Like us on Facebook

  • Support Open Source FairShare Program!

    OpenBuilds FairShare Give Back Program provides resources to Open Source projects, developers and schools around the world. Invest in your future by helping others develop their future.

    Donate to Open Source