Welcome to Our Community

Some features disabled for guests. Register Today.

Project Openbuilds / Open Hardware Keychain 2016-03-03

Keychain so you can represent the openbuilds and open source hardware logo next to your keys.

  1. Kyo

    Kyo Veteran
    Staff Member Builder Resident Builder

    Joined:
    Feb 27, 2014
    Messages:
    673
    Likes Received:
    702
    Kyo submitted a new resource:

    Openbuilds / Open Hardware Keychain - Keychain so you can represent the openbuilds and open source hardware logo next to your keys.

    Read more about this resource...
     
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    Kyo these are awesome! Thank you for sharing :thumbsup:
    Hope you don't mind, I added a few files to try and help.
    Gcode - some of my standard settings
    STL - for anyone wanting to 3D print it
    Sketchup with the worked part in SketchUcam
     

    Attached Files:

  3. Kyo

    Kyo Veteran
    Staff Member Builder Resident Builder

    Joined:
    Feb 27, 2014
    Messages:
    673
    Likes Received:
    702
    Thank you, Happy to share. I don't mind at all, those are great additions.
     
    Mark Carew likes this.
  4. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    Kyo and eddiejr like this.
  5. Kyo

    Kyo Veteran
    Staff Member Builder Resident Builder

    Joined:
    Feb 27, 2014
    Messages:
    673
    Likes Received:
    702
    Awesome, it looks great ! I have to grab some acrylic to mess around with...
     
  6. Davus

    Davus New
    Builder

    Joined:
    Jul 21, 2016
    Messages:
    4
    Likes Received:
    0
    Hi Kyo,
    I've yet to carve my first item. I have a few bits ready to use when the time comes. Can I ask what kind of bit you used for your aluminum version?
    Thanks,
    Davus
     
  7. Kyo

    Kyo Veteran
    Staff Member Builder Resident Builder

    Joined:
    Feb 27, 2014
    Messages:
    673
    Likes Received:
    702
    Hello Davus,
    Here are the details I used to cut the Aluminium version.

    16,000rpm
    40ipm
    0.015" depth of cut
    40% Step over

    Endmill used was. 1/8" flat nose single flute upcut carbide
     
    jctb2 likes this.
  8. Davus

    Davus New
    Builder

    Joined:
    Jul 21, 2016
    Messages:
    4
    Likes Received:
    0
    Thanks, now for some aluminum.
     
  9. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    Kyo,

    Love this project!!! Any chance you could export this file in a step format or anything else that might work in Solidworks!?!?

    Thanks,
    Sonny
     
  10. Kyo

    Kyo Veteran
    Staff Member Builder Resident Builder

    Joined:
    Feb 27, 2014
    Messages:
    673
    Likes Received:
    702
    @Sonny Lowe Thanks, Sure no problem. I went ahead and redrew this Project in Fusion 360. Some of the arcs differ from the first iteration otherwise same design. Here is a Step export as well as the source Fusion archive file.

    Keychain.png
     

    Attached Files:

  11. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    Perfect...thank you :)
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice