Welcome to Our Community

Some features disabled for guests. Register Today.

on the cnc nema23 motors ect.

Discussion in 'CNC Mills/Routers' started by gibson, Jul 27, 2015.

  1. gibson

    gibson Journeyman
    Builder

    Joined:
    Jul 5, 2015
    Messages:
    99
    Likes Received:
    8
  2. Tweakie

    Tweakie OpenBuilds Team
    Staff Member Moderator Builder

    Joined:
    Jan 18, 2014
    Messages:
    785
    Likes Received:
    300
    Well it's sort of yes and no because you essentially get what you pay for.

    Those TB6560 blue boards have a really bad reputation - some work perfectly and some have faults - you may be lucky and get a good one but be prepared. From my experience with these bundles - the PSU is good but the stepper motors are only average when it comes to performance.

    Tweakie.
     

Share This Page