Welcome to Our Community

Some features disabled for guests. Register Today.

NOOB limit switch questions.

Discussion in 'General Electronics' started by PaulB IOM, Nov 25, 2017.

  1. PaulB IOM

    PaulB IOM New
    Builder

    Joined:
    Nov 13, 2017
    Messages:
    3
    Likes Received:
    0
    Hi All,

    Noob here so bear with me if some stupid questions !!
    I have just built a C beam XL and wish to position the limit switches I have been advised to incorporate. The x axis seems straightforward but could I ask for some guidance as to where the switches should be placed for the Y and z axis ?
    Thanks

    Paul.
     
  2. Flash22

    Flash22 Veteran
    Builder

    Joined:
    Sep 1, 2015
    Messages:
    159
    Likes Received:
    38
    Z axis - bottom left and top right
    Y axis - it depends if your running internal or external wheels, if its external you have to get creative
     
  3. PaulB IOM

    PaulB IOM New
    Builder

    Joined:
    Nov 13, 2017
    Messages:
    3
    Likes Received:
    0
    Thanks for guidance will have a look at where I can mount them ! steep learning curve !!
    best wishes
     

Share This Page