Welcome to Our Community

Some features disabled for guests. Register Today.

Need to build an engraver.

Discussion in 'Laser Cutters' started by DeltaWolf, Nov 20, 2017.

  1. DeltaWolf

    DeltaWolf New
    Builder

    Joined:
    Jul 5, 2017
    Messages:
    5
    Likes Received:
    0
    Hello all,
    I am looking for plans or parts list for an engraver to engrave 7075-T6 Aluminum, as well as other types of aluminum, and wood if possible. The reason for this build, it will be for my gunsmith.manufacturing company. I only need to go a min of 1/16” (.003"). I obviously would like to go a little deeper than that but that is the federal minimum for marking firearms. I would need pretty good detail to I can place my logo on the 7075-T6. I have never built anything like this and it only needs to be 500mmx500mm for most projects. Thank you in advance.
     

Share This Page