Welcome to Our Community

Some features disabled for guests. Register Today.

My new 4-axes integrated motion controller

Discussion in 'Controller Boards' started by HPB, May 31, 2018.

  1. HPB

    HPB Veteran
    Builder

    Joined:
    Nov 28, 2015
    Messages:
    62
    Likes Received:
    40
    Hey folks, I've been working on upgrading my earlier version of motion controller and the motionPro 6600 is the result of that. I have to thank all the folks here and a few other communities for the valuable feedback you gave. I have to tried to incorporate as many features as possible in this one.

    The crowdfunding campaign for the controller is live on Crowd Supply. I'd really love it if you can help me bring it to life!

    Here is a quick feature list:
    1. Supports upto 4-axes machines
    2. Works with LinuxCNC, Mach 3/4 and pretty much any software that can output STEP and DIR signals
    3. Integrated onboard four 4A Toshiba stepper drivers capable of driving up to four NEMA 17/23/34 motors
    4. Independently configurable current limits, stepper resolutions (up to 16 micro-steps) and torque settings for all four axes
    5. Wide input power range: 9V to 36V with reverse power connect protection
    6. Multiple control logic inputs: Parallel/printer port, USB and an IDC header
    7. Has onboard grbl firmware as well
    8. Includes a custom jogger and an optional 4A laser driver
    9. Noise filtered endstop, probe and emergency stop connects
    10. Big beefy heatsink for excellent thermal management

    [​IMG]

    [​IMG]
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice