Welcome to Our Community

Some features disabled for guests. Register Today.

Imperial units be damned!

Discussion in 'Suggestions' started by andrew, Apr 6, 2014.

  1. andrew

    andrew Journeyman
    Builder

    Joined:
    Mar 16, 2014
    Messages:
    47
    Likes Received:
    17
    Why must I deal with this 1/4" inherent to the eccentric spacer? We're all working in millimeters and the only inches are in your spacers. What is the mad logic perpetuating this dissonance?
     
    TMG likes this.
  2. Tweakie

    Tweakie OpenBuilds Team
    Staff Member Moderator Builder

    Joined:
    Jan 18, 2014
    Messages:
    785
    Likes Received:
    300
    I feel your pain Andrew - perhaps one day we will all be working to the same units of measurement but I wouldn't want to hold my breath. :)

    Tweakie.
     
  3. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    1,957
    Likes Received:
    1,134
    I hear you too @andrew and the short answer is different manufactures deal in different units so it makes it hard to stick with one all the time, but we try as much as possible.
     
    TMG likes this.
  4. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder

    Joined:
    Dec 20, 2013
    Messages:
    1,509
    Likes Received:
    629
    Maybe its time to relabel the spacers 6.35mm. ;)
     
    Andy Crouch and Mark Carew like this.

Share This Page