Huanyang spindle inverter tripping breaker

I installed a 2.2kw 220v 1single phase spindle with matching inverter on my Workbee 1510. Wired to a 220v 30 amp breaker. Programmed the inverter to settings from a couple of reliable videos, to be controlled through the GRBL software.As soon as I hit the M3 to turn the spindle on, the breaker trips and inverter shuts off. Here are my inverter settings:
P001 1
P002 1
P003 50
P004 400
P005 400
P006 2.5
P007 .5
P008 220
P009 15
P010 8
P011 10
P013 0
P014 10
P015 10
P016 20
P017 20
P018 40
P019 40
P020 80
P021 80
P022 0
P023 1
P024 1
P070 1
P072 400
P073 0
P141 10
P144 3000
Does anyone see a problem with these settings? Thanks for any help