Welcome to Our Community

Some features disabled for guests. Register Today.

http://www.mesanet.com/ & FPGA motion control cards

Discussion in 'Controller Boards' started by Public Do Omens, Jan 31, 2014.

  1. Public Do Omens

    Guest Builder

    Mesa Electronics 7i43: http://www.mesanet.com
    $80. The 7i43 is an FPGA-based "Anything I/O" board. It has a Spartan3 FPGA (200K or 400K gates) and 48 I/O pins.LinuxCNC supports this board with the HostMot2 firmware, which is available in many different configurations providing encoders, PWM generators, step/dir generators, and general purpose digital I/O pins.

Share This Page