Welcome to Our Community

Some features disabled for guests. Register Today.

Help with laser engraver config???

Discussion in 'Laser Cutters' started by gazingm42, Feb 9, 2017.

  1. gazingm42

    gazingm42 Journeyman
    Builder

    Joined:
    Feb 8, 2017
    Messages:
    52
    Likes Received:
    10
    So I been bitten by the laser bug and want to build a nice laser cutter. I been doing lots of research and know the parts to order to make a c-beam x y cutter. But have questions on the software and the drivers.

    1. I know I need xpro 3 driver for the motors. Plus a power supply for the control board.
    2. Also understand I can use the laser web to controls the system.
    3. What drives the laser, want to get a 2.5 - 5w laser. What controller do I need that I can use to control the laser with the laser web 3.

    I missing the understanding on how the control all the pieces, stepper motors, laser with laser web.

    Thanks for all your help.
     

Share This Page