Welcome to Our Community

Some features disabled for guests. Register Today.

Help designing and building a TV lift.

Discussion in 'General Talk' started by Vester Wright, Aug 6, 2016.

  1. Vester Wright

    Builder

    Joined:
    Aug 6, 2016
    Messages:
    2
    Likes Received:
    0
    Can someone help me build a simple tv lift with dual track linear actuators and a remote
     
  2. Paul Pridday

    Paul Pridday Journeyman
    Builder

    Joined:
    Jul 17, 2016
    Messages:
    62
    Likes Received:
    22
    Keep in mind that I am a complete noob and haven't even built my C Beam machine yet. I do believe that there are Bluetooth controllers out there or possibly it could be run off of a Raspberry Pi wifi setup. The mechanics of it should be fairly easy seeing that is should only be on an X-Y axis. OR you could put a funky Z axis setup in it as well that brings it forward a smidge once it is in the up position. Sounds like a cool project!
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice