Welcome to Our Community

Some features disabled for guests. Register Today.

CNC xPRO V4 and the Huanyang VFD

Discussion in 'CNC Mills/Routers' started by Alan Rump, Nov 10, 2019.

  1. Alan Rump

    Alan Rump New
    Builder

    Joined:
    Aug 19, 2019
    Messages:
    3
    Likes Received:
    0
    Hello dear forum members, I am currently building my own design cnc. I recently bought a 2.2 KW spindle and Huanyang VFD set via ebay that I want to run in combination with a CNC xPRO V4 Controller Stepper Driver. I encounter the following problem with connecting the CNC xPRO V4 and the VFD pin contacts. I have already searched a bit through the forum, but I have rarely encountered my type of controller. Who can help me with this and with connection and the setting. I would greatly appreciate this. Thank you!

    Greetings from The Netherlands
     

    Attached Files:

  2. Giarc

    Giarc Master
    Moderator Builder

    Joined:
    Jan 24, 2015
    Messages:
    1,530
    Likes Received:
    803
  3. Alan Rump

    Alan Rump New
    Builder

    Joined:
    Aug 19, 2019
    Messages:
    3
    Likes Received:
    0
    This is how my VFD look like.

    I hope some one can help me!!

    Switch to 10V and i already try

    XGND ---> Analog Ground
    VI1 --> Spindle PWM 10V

    with no results.


    When i connect on the VFD XGND ---> FWD the spinle turns on max speed.

    YL620-A.JPG Aansluit pins XPro V4_VFD.jpg
     
  4. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Project Maker Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    3,640
    Likes Received:
    1,422

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice