Welcome to Our Community

Some features disabled for guests. Register Today.

CNC xPro + DM542A - Want tips and pics!

Discussion in 'CNC Mills/Routers' started by TheFogginSailor, Mar 2, 2018.

  1. TheFogginSailor

    TheFogginSailor Well-Known
    Builder

    Joined:
    Dec 23, 2015
    Messages:
    26
    Likes Received:
    4
    Hi guys!

    Before Christmas I had some issues, that I just started addressing.
    The machine has worked just fine with larger projects, but when we are down to tiny engravings etc, it struggles hard.
    Link to the previous thread here: https://openbuilds.com/threads/ox-stuttering-x-and-y-axis-cnc-xpro-v3.10667/

    So, I am building a box for the controllers, psu etc. and doing some rewiring with some better cables.
    And I am adding a 2w laser as well, not sure how good that will turn out on such a large machine, vibrations and all, but it is worth a try.

    I bought 4 used DM542A to use with the CNC xPro V3, and I want to see how you set it up, if you have.

    I am the kind of guy that learns best from pictures, and not to read pages and pages of diagrams, how to's and specs, so if you have pictures of your build, please post them! :)
     
    CNCMD likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice