Welcome to Our Community

Some features disabled for guests. Register Today.

C-Beam question

Discussion in 'CNC Mills/Routers' started by smashguitars, Feb 1, 2016.

  1. smashguitars

    Builder

    Joined:
    Feb 1, 2016
    Messages:
    1
    Likes Received:
    0
    Hello all, i'm new here, but been reading for a few days. i would like to get into CNC and i think for what i would like out of it the C-Beam might be the right machine. The one question i have is what kind of accuracy is achievable with this machine for purposes of milling PCBs? And if there are folks who have use this machine for this purpose what spindle do they prefer.

    Off course if someone can recommend a different approach, i'm open to any and all suggestions. The main uses for me are PCBs and aluminum of up to approx 12".

    For PCBs ,ideally i'd like to be able to cut for 20 mil traces. Is something like this achievable? Just trying to understand the limitations of the machine to guide my board designs.

    thank you
     

Share This Page