Welcome to Our Community

Some features disabled for guests. Register Today.

C-Beam Machine Mechanical Bundle - should I?

Discussion in 'General Talk' started by Traxxtar, Dec 17, 2015.

Tags:
  1. Traxxtar

    Traxxtar Journeyman
    Builder

    Joined:
    Nov 20, 2015
    Messages:
    56
    Likes Received:
    15
    I asked 7 companies for quotes to make the OOZNEST plates here in the US. I've only received one quote back and it was for $495. The C-Beam Machine bundle is $495.

    Should I just buy the machine and make my own? Afterwards, I could make plates for you guys and other stuff; plus I'd have my own mini-CNC machine. ;)

    Is the C-Beam bundle good enough to make the plates we/you use?

    Thanks!
    Darren
     
  2. Steve Fox

    Steve Fox Veteran
    Builder

    Joined:
    Feb 22, 2015
    Messages:
    129
    Likes Received:
    20
    Email Dan at:
    [email protected]

    If anyone will give you a decent price, it's him. I understand he uses a water cutter, which does a much better job, in my opinion.
    The C-Beam bundle will probably work, but it will be slow going. I think it is built more for prototypes, not production work.

    I don't know how you can survive without a CNC machine. Is there anything keeping you from doing both?
     
  3. Ryan Lock

    Ryan Lock Master
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    364
    Likes Received:
    151
    We can ship our ones to US if that would be of interest to you, shouldn't cost to much. Also you won't have to pay our VAT.
     
  4. Traxxtar

    Traxxtar Journeyman
    Builder

    Joined:
    Nov 20, 2015
    Messages:
    56
    Likes Received:
    15
    Great!! Can you give me a total cost and shipping to zip code 14450?

    Thank you!!
     
  5. Ryan Lock

    Ryan Lock Master
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    364
    Likes Received:
    151
    It will be £22.50 with DHL. If you want a a full kit it will be around £80, but this depends on the size.
     
  6. Traxxtar

    Traxxtar Journeyman
    Builder

    Joined:
    Nov 20, 2015
    Messages:
    56
    Likes Received:
    15
  7. Ryan Lock

    Ryan Lock Master
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    364
    Likes Received:
    151
    Sorry i wasn't clear. For the plates kit it is £22.50.

    We also offer full kits to build an ox cnc machine, which include the plates and all the mechanical/rails needed. Depending on the size of the machine these will cost about £80 to ship.
     
    GrayUK likes this.

Share This Page