Welcome to Our Community

Some features disabled for guests. Register Today.

Acorn CNC for My Sphinx

Discussion in 'Controller Boards' started by SCYBUCK, Oct 6, 2017.

  1. SCYBUCK

    SCYBUCK Well-Known
    Builder

    Joined:
    Sep 11, 2017
    Messages:
    21
    Likes Received:
    3
    The proposed plan is a Gecko G540 to Acorn CNC to the Centroid PC operator interface. NO Mach 3 or Mach 4. Any comments?
     

Share This Page