Welcome to Our Community

Some features disabled for guests. Register Today.

10 TIps for Router Aluminum Cutting 2015-01-02

cnc,aluminum,feed.speeds

  1. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    1,955
    Likes Received:
    1,133
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    1,955
    Likes Received:
    1,133
    Welcome :) Glad to help my friend.
     
  3. LancsRick

    LancsRick New
    Builder

    Joined:
    Jan 26, 2016
    Messages:
    5
    Likes Received:
    0
    Really interesting read, which has made me have a couple of questions...

    1) At what point is a lubricant spray required? In the Tips it mentions that it is more or less a given, but in the videos of the C-beam machine there is just a bit of kerosene hand-applied. Will kerosene always be sufficient with fine cuts?

    2) A blower is recommended to clear chips, and yet looking through the forums here, most people don't even have dust extraction, let alone a shoe or a precision blower. How critical is this in reality?

    Thanks!
     

Share This Page