Separate names with a comma.
Some features disabled for guests. Register Today.
I finished assembling my quenbe Pro and gave the machine some tests. I have it moving very well under its own programming. I was very excited....
I need a little help. I have been using my workbee 1010 with a 1.5kw spindle, running blackbox successfully for a few years now. Today I was in...
Hi all - I upgraded my Dewalt 611 to a 1.5kW VFD spindle. Before the mod I used the IOT relay to power the router and flood pump from BlackBox's...
Hi, I've inherited a OpenBuillds platemaker without full information and it's got a spindle I was hoping someone might recognise it, though...
Hi all, I have built an electronics enclosure for my CNC router, incorporating a estop circuit and relays for dust extraction and spindle coolant...
Just wanted to leave a note to an issue I had with a Huanyang Spindle and VFD EMI Problem on my modded Sphinx 1010. Backstory: I was running an...
Hello, I have a 110V 1.5KW ER-11 Spindle and a VFD YL620A. 1. Can I run the spindle through the Blackbox? If so what do I change in the...
I decided to upgrade my old ShapeOko 2 to a larger CNC, and I have been buying parts when I have the money, I started getting parts to do this...
Thank you for the help :) I have my VFD connected with the relay on the blackbox controlling the DCM to FOR connection. When I run M3 S2400 the...
I am setting up a Mophorn 220v 4KW air cooled spindle with an A2-8040 VFD Have read through the Openbuilds documentation for setting up the 0-10v...
Hi all, I’m just wondering if someone could help? I have my workbee setup with an Xsy-at1 vfd and an air cooled spindle. My dust extractor is...
I installed a 2.2kw 220v 1single phase spindle with matching inverter on my Workbee 1510. Wired to a 220v 30 amp breaker. Programmed the inverter...
Hi all I’m after abit of help, I’m setting up a 1.5kw air spindle with an XSY-AT1 VFD but I want to control the spindle speed through my X-pro...
After a series of frustrations, the 110V Huanyang VFD (HY01D511B) driving my 1.5kW spindle finally let the smoke out (under at least partially...
[ because it seemed to belong in a number of different forums... I dumped it here instead ] I want to preface this by saying I'm no stranger to...
Hi all Has anyone got any setup guides for vfd’s and the x-pro v4. Finally decided to ditch the dc motor for something with a bit more power thanks
Hello all and thanks for taking the time to read this thread. I just built a Work Bee CNC router and having an issue with getting the VFD going....
Hi all. New to this forum, so please excuse any duplication of stuff I haven't found elsewhere here. I currently have a Shark HD4 I bought about...
Could I have some opinions please on the above machines, I am building a 1075 Lead Screw from Makersupplies in Denmark and I am looking for...
I'm having a devil of a time getting the last bits operational. I can get the VFD to control the 800W spindle from the panel, I can get it to...
